VICOTE® F814
聚醚醚酮
Victrex plc
產品說明:
VICOTE F814 has been specifically bulated to provide a resilient coating with high wear and abrasion resistance on ferrous and non-ferrous bls such as carbon and cast steel. These properties are retained at high temperatures where other coatings would potentially fail. Typical properties are high continuous use temperature of 280°C, excellent wear, abrasion and cut through resistance at these high temperatures combined with excellent chemical resistance. VICOTE dispersions have a low level of extractables and are inherently flame retardant. Contact Victrex plc for further details.
VICOTE F814 dispersions are aqueous based however there are small amounts of solvents present. Refer to the appropriate MSDS sheet for details.
The VICTREX® PEEK polymer contained in the VICOTE dispersions like other non-coating grades of VICTREX PEEK polymer are thermoplastic in nature and exhibit flow above the melt temperature. When processed using the correct guidelines the coatings will exhibit the excellent properties that VICTREX PEEK polymer is renowned for. For further inbation consult the Victrex Chemical Resistance Data sheets.
|
供貨地區 |
|
|||
|
特性 |
|
|||
|
用途 |
涂層應用 |
|||
|
機構評級 |
FDA 21 CFR 175.300 |
|||
|
形式 |
液體 |
|||
|
加工方法 |
|
|
物理性能 |
額定值 |
單位制 |
測試方法 |
|
密度 (77°F) |
1.05 |
g/cm3 |
ISO 2811 |
|
pH值 |
10.0 |
|
內部方法 |
|
Weight - Solids |
37 |
% |
內部方法 |
|
粘度 (77°F) |
1.0 |
min |
ISO 2431 |
|
機械性能 |
額定值 |
|
測試方法 |
|
摩擦系數 2 |
0.54 |
|
ASTM G133 |
|
熱性能 |
額定值 |
單位制 |
測試方法 |
|
連續使用溫度 |
536 |
°F |
|
|
熔融溫度 3 |
|
|
|
