五、臺歷月歷掛歷筆記本雙螺環 單螺環全自動裝訂機的基本結構及特殊功能 Basic Structure
機器由沖孔系統、機械手送料系統、穿線系統以及氣泵、電氣控制系統及獨立的收放物料裝置組成）。
The machine is consist of Punching system, Gripper deliver system, Air compressor ,Electric control system, and the Feed and Receive belt.
1.臺歷月歷掛歷筆記本雙螺環 單螺環全自動裝訂機沖孔系統 Punching System
本系統由伺服系統、傳動系統、凸輪機構、理料機構、沖孔模具組組成。通過機械手1將產品從沖孔待料位移至打孔等待位，然后三面同時整理將紙張對齊，然后通過推刀分層推至沖孔工位沖孔，沖孔結束后通過機械手2將書本移至下一工位。產品大小和頁邊距均可調整，通過更換沖孔模具可沖制各種形狀的孔。
The system consists of servo system, transmission system, cam structure, neat parts, punching mould, Through the Gripper 1 to take the book from the wait station to punch b, then neat the book, then the push knife to push the book to punch, after punching the Gripper 2 move the book to next station.
2．臺歷月歷掛歷筆記本雙螺環 單螺環全自動裝訂機機械手送料系統 Gripper deliver system
該系統由伺服系統、光電系統、皮帶傳動系統、直線導軌、氣缸及連桿組成的同步聯動機構。待沖孔待料位有產品光電給信號，氣缸夾緊，夾緊信號傳給伺服電機，電機運轉帶動皮帶傳動，皮帶系統將力沿直線導軌輸出至機械手，機械手12通過連桿連接保證了機械手12同步聯動各個工位有序供料。
The system consists of servo system, photoelectric system, belt drive system, linear guide, cylinder and connecting rod composed of synchronous bage mechanism. To be punching material level to the product photoelectric signal, cylinder clamping, clamping signal to the servo motor, the motor running belt drive, belt system will be along the linear guide output to the gripper, the gripper 12 through the connecting rod to ensure that the gripper 12 synchronous bage of each station orderly supply
該機構采用伺服驅動，同步帶傳動，直線導軌導向。因而整機運轉平穩，傳動可靠，降低了工作噪聲，大大提高了設備精度和穩定性。
The agency uses servo drive, timing belt drive, linear guide guide. So the machine running smoothly, reliable transmission, reducing the work noise, greatly improving the equipment accuracy and stability.
3．臺歷月歷掛歷筆記本雙螺環 單螺環全自動裝訂機獨立的收放物料裝置 Feed and Receive belt
本機配置的放料裝置是一款放料寬度可調的鏈傳動機構?？筛鶕?jù)產品的寬度調節好合適的料道寬度，人工將產品放入料道，通過傳動機構將產品傳送到?jīng)_孔待料位。在此工位放料大大提高了設備的安全性能。
The machine is equipped with a discharge device with adjustable b of material. Can be adjusted according to the b of the product, the product will be manually put into the belt, through the transmission device will be sent to the punching b to be expected. In this station discharge material greatly improved the safety perbance of the equipment.
收料裝置主要是配合主機機械手3完成收料工作，可根據主機的裝訂速度自動調整線體的每次位移。
Receiving belt is mainly with the host gripper 3 to complete the receipt work, according to the host's binding speed automatically adjust the line of each displacement.
濟南 青島 淄博 棗莊 東營 煙臺 濰坊 濟寧 泰安 威海 日照 濱州 德州 聊城 臨沂 菏澤 萊蕪 臺歷月歷掛歷筆記本雙螺環 單螺環全自動裝訂機