Accuracy:± 0.02 pH
Body material:PEEK
Cable Connection:Analog
Cable Length:4.5 m 5-conductor (plus two isolated shields) cable with XLPE (cross-bed polyethylene) jacket; rated to 302 ???oF (150 ???oC)
Calibration Method:Two point automatic, one point automatic, two point manual, one point manual.
Communication:MODBUS
Diameter:34.9 mm
Drift:0.03 pH per 24 hours, non-cumulative
Electrode Type:General Purpose
Flow:max. 3 m/s
Length:196.3 mm
Material:Ground Electrode: Titanium
Mounting:Convertible
Operating Temperature Range:-5 - 105 °C
Pressure Range:max. 10.7 bar sensor only (pressure range of mounting hardware to be checked separaby)
Range:-2.0 - 14.0 pH
Repeatability:± 0.05 pH
Sensor Thread:1" NPT at both ends
Temperature Accuracy:± 0.5 °C
Temperature Compensation:Automatic with NTC 300 ? thermistor, or manually fixed at a user-entered temperature,
additional selectable temperature correction factors (ammonia, morpholine, or user-defined pH/°C linear slope) available for pure water automatic compensation 0.0 - 50 °C
?Automatic with NTC 300 ? thermistor, or manually fixed at a user-entered temperature,
additional selectable temperature correction factors (ammonia, morpholine, or user-defined pH/°C linear slope) available for pure water automatic compensation 0.0 - 50 °C
Temperature Sensor:NTC 300 Ohm thermistor for automatic temperature compensation and analyzer temperature readout
Weight:0.9534 kg
