INCO-WELD? 686CPT? 焊絲
INCO-WELD? 686CPT? 焊絲AWS A5.14 ERNiCrMo-14 提供材質書
INCO-WELD 686CPT 焊絲主要適用于鎢極惰性氣體保護焊和熔化極氣體保護電弧焊焊接雙相不銹鋼、超級雙相不銹鋼、超級奧氏體不銹鋼、INCONEL C-276\626\625\686合金以及鎳合金例如UNS N06059\N06022鎳合金，也可以用來在部分鋼種表面形成一層耐蝕防護堆焊層。這種焊絲的高合金組分（Cr+Mo+W）提高了其抵抗點蝕、裂隙腐蝕和常規腐蝕的能力。INCO-WELD 686CPT 焊絲良好的耐蝕性能使其在腐蝕性工作環境中體現出了巨大的應用價值，它可以耐受很多種腐蝕介質的侵蝕，例如鹽酸、硫酸、氧化氯溶液、濃熱的含氯酸性溶液譬如二氧化硫在NaCl鹽水中的飽和溶液；同時它還對晶間侵蝕以及在高氧濃度環境敏化后的晶間侵蝕具有很好的抵抗能力。
AWS A5.14 ERNiCrMo-14 UNS N06686
規格 ASME Ⅱ,SFA-5.14,ERNiCrMo-14 ISO SNi6686
ASME Ⅸ,F-No.44 Europe NiCr21Mo-14
Ni--------------- 剩余 Cu ------------ 0.5 max
C ----------- 0.01 max Si ----------- 0.08 max
Mn ----------- 1.0 max Ti ----------- 0.25 max
化學 Fe ----------- 5.0 max Cr ---------- 19.0-23.0
組分 P ----------- 0.02 max Mo ---------- 15.0-17.0
S ---------- 0.02 max W --------------3.0-4.4
Al ----------- 0.5 max 其它 ----------0.50 max
a 添加Co
典型 拉伸強度，psi 110,000
機械 MPa 758
性能 延伸率，(4d）% 35
硬度，HRB 95
焊絲可以以線卷或直線狀供貨，并有幾種不同直徑可供選擇，如下表所示
產品
mm 0.8 0.9 1.0 1.14 1.2 1.6 2.4 3.2
in 0.030 0.035 0.040 0.045 0.047 0.062 0.093 0.125
供貨
狀態
直線長度--915 mm(36”)或1000 mm(39”)
INCO - WELD ? 686 CPT ? welding wire
INCO - 686 CPT WELD wire is mainly used in the tungsten inert gas welding and melting polar gas shielded arc welding welding duplex stainless steel, super duplex stainless steel, super austenitic stainless steel, INCONEL C - 276\626\625\686 alloy and nickel alloy such as UNS N06059 \ N06022 nickel alloy, also can be used in some b a corrosion protective layer on the surface of steel hardfacing layer. The high alloy comb of this wire (Cr +Mo+ W) enhances its ability to resist pitting, cracking and conventional corrosion. INCO - 686 CPT WELD wire good corrosion resistant perbance to make it work in corrosive environment reflects the great application value, it can tolerate a lot of kinds of corrosive medium, such as hydrochloric acid, sulfuric acid, chlorine oxidation solution, strong heat contain chloric acid solution such as sulfur dioxide in saturated solution of NaCl salt water; It also has good resistance to intergranular erosion and intergranular erosion after high oxygen concentration.
AWS A5.14 ernicrmo-14 UNS N06686
ASME specifications Ⅱ, SFA - 5.14, ERNiCrMo - 14 ISO SNi6686
ASME Ⅸ, F - No. 44 Europe NiCr21Mo - 14
Ni -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- residual Cu -- -- -- -- -- -- -- -- -- -- -- -- 0.5 Max
C -- -- -- -- -- -- -- -- -- -- - 0.01 Max Si -- -- -- -- -- -- -- -- -- -- - 0.08 Max
Mn -- -- -- -- -- -- -- -- -- -- - 1.0 Max Ti -- -- -- -- -- -- -- -- -- -- - 0.25 Max
Chemical Fe -- -- -- -- -- -- -- -- -- -- - 5.0 Max Cr -- -- -- -- -- -- -- -- -- - 19.0-23.0
Components P -- -- -- -- -- -- -- -- -- -- - 0.02 Max Mo -- -- -- -- -- -- -- -- -- - 15.0-17.0
S -- -- -- -- -- -- -- -- -- -- 0.02 Max W -- -- -- -- -- -- -- -- -- -- -- -- -- - 3.0-4.4
Al -- -- -- -- -- -- -- -- -- -- -- 0.5 Max other -- -- -- -- -- -- -- -- -- -- 0.50 Max
Add a Co
Typical tensile strength, psi 110,000
Mechanical 758 MPa
Perbance elongation, (4d) % 35
Hardness, HRB 95
The wire can be supplied in a reel or straight line, with several different diameters to choose from, as shown in the table below
products
Mm 0.8 0.9 1.0 1.14 1.2 2.4 3.2
In 0.030 0.035 0.040 0.045 0.035 0.062 0.093 0.125
supply
state
Linear length -915 mm(36 ") or 1000 mm (39)
