INCONEL?182焊條
INCONEL? 182焊條價格規格化學成分提供材質書
INCONEL 182焊條適用于手工電弧焊接INCONEL 600\601\690合金。用這種焊條形成的焊縫金屬具有很高的高溫強度和抗氧化能力，并能滿足苛刻的X射線照相探傷要求。
INCONEL 182焊條具有廣泛的應用范圍，可以用于異種材料的焊接，如：INCONEL系列合金、INCOLOY系列合金與碳鋼、不銹鋼、鎳以及MONEL系列合金的焊接；MONEL系列合金與碳鋼的焊接；鎳與不銹鋼的焊接；不銹鋼與碳鋼的焊接。
INCONEL?182焊條適用于全位置焊，焊接時應采用直流正接的方式。
|
AWS A5.11,ENiCrFe-3 DIN 1736 EL-NiCr15FeMn ASME Ⅱ,SFA-5.11,ENiCrFe-3 Werkstoff Nr.2.4807 規格 ASME IX,No-F.43 ISO ENi 6182 UNS W86182 Europe ENiCr15Fe6Mn VdTüV 2105.00 MIL-E-22200/3 Types MIL-8N12,MIL-8N12H |
|
Nia -------- 59.0 min Cu--------- 0.50 max 化學 C ---------- 0.10 max. Cr-------- 13.0-17.0 成份 Mn ---------- 5.0-9.5 Ti -------- 1.0 max Fe --------- 10.0 max Nbb ------- 1.0-2.5 S ---------- 0.015 max P -------- 0.030 max Si ----------- 1.0 max 其它 ------ 0.50 max
|
|
a 添加Co，當特別要求時Co最大含量為0.12 b 添加Ta，當特別要求時Ta最大含量為0.30 b 最低 拉伸強度，psi 80,000 機械 MPa 552 性能 延伸率，(4d）% 30
|
|
直徑 |
mm |
2.4 |
3.2 |
4.0 |
4.8 |
|
|
in |
3/32 |
1/8 |
5/32 |
3/16 |
|
長度 |
mm |
229 |
356 |
356 |
356 |
|
|
in |
9 |
14 |
14 |
14 |
|
電流 |
A |
40-65 |
65-95 |
95-125 |
125-165 |
產品
供貨
狀態
INCONEL ? 182 electrode
INCONEL 182 welding rod is suitable for manual arc welding INCONEL 600\601\690 alloy. The weld bl bed by this electrode has high temperature strength and antioxidant capacity, and can meet demanding X-ray radiographic inspection requirements.
INCONEL 182 electrode has a wide range of applications and can be used for welding of heterogeneous materials such as INCONEL series alloy, INCOLOY series alloy and welding of carbon steel, stainless steel, nickel and MONEL series alloys. Welding of MONEL series alloy and carbon steel; Welding of nickel and stainless steel; Welding of stainless steel and carbon steel.
INCONEL ? 182 electrode for all b welding, the welding should be adopted when the dc on the way.
AWS A5.11, enicrfe-3 DIN 1736 el-nicr15femn
ASME Ⅱ, SFA - 5.11, ENiCrFe - 3 Werkstoff Nr. 2.4807
Specification ASME IX,No- f. 43 ISO ENi 6182
UNS W86182 Europe ENiCr15Fe6Mn
VdTuV 2105.00
MIL - E - 22200/3 Types MIL - 8 n12, MIL - 8 n12h
Nia -- -- -- -- -- -- -- -- 59.0 min Cu -- -- -- -- -- -- -- -- -- 0.50 Max
Chemical C -- -- -- -- -- -- -- -- -- - 0.10 Max. Cr -- -- -- -- -- -- -- - 13.0-17.0
Comb of Mn -- -- -- -- -- -- -- -- -- - 5.0-9.5 Ti -- -- -- -- -- -- -- -- 1.0 Max
Fe -- -- -- -- -- -- -- -- -- 10.0 Max Nbb - -- -- -- -- -- - 1.0-2.5
S -- -- -- -- -- -- -- -- -- -- 0.015 Max P -- -- -- -- -- -- -- -- 0.030 Max
Si -- -- -- -- -- -- -- -- -- -- - 1.0 Max other -- -- -- -- -- - 0.50 Max
A add Co, the maximum amount of Co is 0.12 when required
The maximum content of Ta is 0.30 when the special request is made
b
Minimum tensile strength, psi 80,000
Mechanical 552 MPa
Perbance extension rate (4d) % 30
Diameter mm 2.4 3.2 4.0 4.8
In 3/32, 1/8, 5/32, 3/16
Length mm 229 356 356 356
14 14 14 14 14 14
Current A 40-65, 65-95, 95, 95, 125-165
