圓形板式橡膠支座350*63
橡膠支座是由多層薄鋼板與多層橡膠片硫化粘合而成一種普通橡膠支座產品,這種產品具有足夠的豎向剛度,能夠?qū)⒅ё喜繕?gòu)造的反力可靠的傳遞給墩臺,支座具有良好的彈性,以應對橋梁的梁端的轉動；又有較大的剪切變形能力，以滿足上部構造的水平位移。
Rubber bearing is composed of multilayer thin plate and multilayer sheet rubber vulcanization adhesion and a common rubber bearing products, this product has enough vertical stiffness, can force reliable transfer to the pier upper bearing structure, bearing has good flexibility, to rotate the coping bridge of Liang Duan; and a larger shear the debation ability, to meet the horizontal displacement of superstructure.
橡膠支座特點
Characteristics of rubber bearing
具有構造簡單、安裝方便、節省鋼材、價格低廉、養護簡便、易于更換等特點。在板式支座表面粘復一層1.5mm-3mm厚的聚四氟乙烯板,就能制作成聚四氟乙烯滑板式橡膠支座它除了豎向鋼度與彈性變形,能承受垂直荷載及適應梁端轉動外,因聚四氟乙烯板的低摩擦系數,可使梁端在四氟板表面自由滑動,水平位移不受限制,特別適宜中、小荷載,大位移量的橋梁使用。
圓形板式橡膠支座350*63
It has the characteristics of simple structure, convenient installation, steel saving, low price, easy maintenance and easy to replace. After the Teflon plate 1.5mm-3mm thick layer on the plate bearing surface, can be made of PTFE sliding plate rubber support in addition to its vertical stiffness and elastic debation under vertical load and can adapt to the rotation of the outer end of the beam, due to the low friction coefficient of PTFE plate, the Liang Duan in the PTFE surface free sliding level the displacement is not restricted, especially suitable for medium and small load, large displacement bridge use.
建筑伸縮縫即伸縮縫，是指為防止建筑物構件由于氣候溫度變化（熱脹、冷縮），使結構產生裂縫或破壞而沿建筑物或者構筑物施工縫方向的適當部位設置的一條構造縫。伸縮縫是將基礎以上的建筑構件如墻體、樓板、屋頂（木屋頂除外）等分成兩個獨立部分，使建筑物或構筑物沿長方向可做水平伸縮。
Expansion joints, namely expansion joints, refer to a structural joint to prevent structural components from cracking or damaging due to climatic and temperature changes, such as thermal expansion and cold shrinkage, along the proper direction of construction joints of buildings or structures. Expansion joints are divided into two independent parts, such as walls, floors, roofs (except wooden roofs), so that buildings or structures can be horizontally bescoped along long directions.
防止房屋因氣候變化而產生裂縫。其做法為：沿建筑物長度方向每隔一定距離預留縫隙，將建筑物從屋頂、墻體、樓層等地面以上構件全部斷開，建筑物基礎因其埋在地下受溫度變化影響小，不必?cái)嚅_。伸縮縫的寬度一般為20厘米到30厘米，縫內填保溫材料，兩條伸縮縫的間距在建筑結構規范中有明確規定。
圓形板式橡膠支座350*63
Prevent cracks in the house from climate change. The b is to reserve gaps in every distance from the length of buildings, and to disconnect buildings from above ground components, such as roofs, walls, floors, etc., because the foundation of buildings is less affected by temperature changes due to their underground burying, so they do not need to be disconnected. The b of the expansion joint is usually 20 cm to 30 cm. The insulation materials are filled in the seams, and the distance between the two expansion joints is bly defined in the construction code.
若建筑物平面尺寸過長，因熱脹冷縮的緣故，可能導致在結構中產生過大的溫度應力，需在結構一定長度位置設縫將建筑分成幾部分，該縫即為溫度縫。對不同的結構體系，伸縮縫間的距離不同，中國現行規范《混凝土結構設計規范》GB50010-2010中8.1條對此有專門規定。
If the plane size of a building is too long, it may cause excessive temperature stress in the structure due to thermal expansion and cold contrb. It is necessary to sew the building into several parts at a certain length, and the joints are temperature joints. For different structural systems, the distance between expansion joints is different. The 8.1 rule in the code for design of concrete structures in China is GB50010-2010.
橋梁伸縮縫GQF-C型、GQF-Z型、GQF-E型、GQF-F型、GQF-MZL型,全都是采用熱軋整體成型的異型鋼材設計的橋梁伸縮縫產品。其中GQF-C型、GQF-Z型、GQF-L型、GQF-F型橋梁伸縮裝置適用于伸縮量80mm以下的的橋梁, GQF-MZL型橋梁伸縮裝置型是由邊梁、中梁、橫梁和連動機構組成的模數式橋梁伸縮縫裝置,適用于伸縮量80mm-1200mm的大中跨度橋梁。
Bridge expansion joints GQF-C, GQF-Z, GQF-E, GQF-F and GQF-MZL are all welded expansion joint products designed by hot rolled integral shaped steel. The GQF-C type, GQF-Z type, GQF-L type, GQF-F type bridge expansion device is suitable for the expansion of the 80mm below the bridge, GQF-MZL bridge expansion device is composed of modular bridge expansion edge beam, beam, beam and bage mechanism joint device, suitable for large and medium span bridge expansion 80mm-1200mm.
為滿足橋面變形的要求，通常在兩梁端之間、梁端與橋臺之間或橋。
In order to meet the requirements of the debation of the bridge, it is usually between the two beam ends, between the Liang Duan and the abutment or the bridge.
