10兆帕橡膠止水帶
橡膠止水帶是在傳統的止水帶基礎上進行了全新改進，橡膠止水帶就是可以利用橡膠本身具有的高彈性和壓縮變形性的特性，在各種載荷下產生彈性變形，從而起到有效緊固密封，防止建筑構造的漏水、滲水及減震緩沖作用，從而提高了施工/伸縮縫的防水安全系數。如果發生滲漏，通過注漿，能有效地、快速的修補，防水質量，可靠不復發，其綜合費用最經濟，徹底解決了傳統止水帶的弱點
The rubber sealing strip is a new improvement in the traditional waterstop, is that we can use the rubber with high elasticity and compression debation characteristics of the rubber sealing belt, elastic debation under various loads, so as to effectively prevent sealing cushion construction Water Leakage, seepage and damping, thereby waterproof safety coefficient of construction / expansion joint improvement. If leakage occurs, grouting can effectively and quickly repair, waterproof quality, reliable and no recurrence, the comprehensive cost is the most economical, compleby solved the weakness of the traditional water stop belt
產品分類：
Product classification:
按材質可分為：天然橡膠型和氯丁橡膠型。其中天然橡膠型止水帶具有很好的彈性和拉伸強度、優異的耐屈撓性、較高的撕裂強度和耐寒性； 氯丁橡膠型止水帶具有優異的耐油性、耐氣候老化性、耐熱老化性和耐燃性。
According to the material can be divided into: natural rubber type and chloroprene rubber type. The natural rubber type water stop belt has good elasticity and tensile strength, excellent bending resistance flexibility, high tear strength and cold resistance; chloroprene rubber type waterproof belt has excellent oil resistance, weathering resistance, heat aging resistance and flame resistance.
按結構及斷面形狀可分為：中埋式、外貼式、可卸式、橋梁伸縮裝置密封橡膠帶、鋼邊橡膠止水帶、遇水膨脹橡膠止水條。
According to the structure and section shape can be divided into: buried, external, removable, bridge bescopic sealing rubber belt, steel edge rubber water stop, water swelling rubber water stop strip.
橡膠止水帶保存運輸注意事項：
Matters needing attention in storage and transportation of rubber water stop belt:
橡膠止水帶在運輸與貯存時不能長時間露天曝曬，防止雨淋，勿與污染性強的化學物質接觸，防止機械，鋼筋損傷。產品應存放場所最好保持-10℃－+30℃，相對濕度在40%－80%應注意勿使其損壞，放置于通風、干燥處、并應避免陽光直射，禁止與酸堿油類及有機溶劑等接觸，且隔離熱源，應保存于室內，并不得重壓，成品應取直平放，勿加重壓。存放場所最好保持-10~+30，相對濕度40%~80%。自生產日期起半年內產品性能應符合國家標準的規定。
Rubber waterproof belt can not be exposed for a long time during transportation and storage, prevent rain, do not contact with strong polluting chemicals, and prevent mechanical and steel damage. The product should be stored to keep the best places for -10 DEG C to +30 DEG C, relative humidity between 40% and 80% should pay attention not to damage and placed in a dry and ventilated place, and should avoid direct sunlight, no contact with acid-base oils and organic solvent, and the isolation of heat, should be kept in the room, and no weight should be finished straight flat, do not add weight. Storage place is best to maintain -10~+30, relative humidity 40%~80%. Within half a year from the date of production, the perbance of the product should comply with the national standard.
注：用戶定貨時應根據工程結構，設計圖紙計算好產品長度，異型結構要有圖紙說明，盡量在工廠中將止水帶連接成整體，如需在現場連接時，可采用電加熱板硫化粘合或冷粘接(橡膠止水帶)或焊接(塑料止水帶)的方法，如用戶連接有困難，我公司可派技術人員現場指導。
Note: the user order should be based on the engineering structure design drawings, calculate the length of products, have special structure drawings and specifications, try to connect into a whole band in the factory will stop, if necessary in the field of connection, can use electric heating plate vulcanization bonding or cold bonding (rubber waterstop) or welding (plastic waterstop). Methods, such as the user is connected with the difficulties, our company can send technical personnel on-site guidance.
外貼（背貼）式橡膠止水帶
External (back) type rubber water stop belt
外貼（背貼）型橡膠止水帶作為防水板的輔材，可廣泛應用于地下室、地鐵隧道、公路和鐵路隧道工程的防水及水壩、人工湖、水池、污水處理場、垃圾掩埋場等工程的混凝土構筑物底板或壁板外側（構筑物迎水面）的防水及防滲。實際應用中主要使用在水壓及變形量較小的變形縫、伸縮縫、沉降縫等，具有與混凝土錨固緊密、止水密封及適應伸縮縫拉伸變形等特點，結構物的背貼式止水帶也可作為普通止水帶使用，應用于混凝土現澆時變形縫、施工縫內與混凝土結構成為一體的基礎工程中，解決縫隙處的滲漏水問題背貼式止水帶主要適用于混凝土構筑物底板或壁板外側（混凝土迎水面）。具有與混凝土錨固緊密、止水密封及彈性拉伸變形等特點。外貼式止水帶是防水板后的第一道防水層，對于隧道滲水的預防至關重要。
Stick (back) type rubber waterstop waterproof board as auxiliary materials, can be widely used in the basement, metro tunnel, highway and railway tunnel waterproofing and dams, artificial lakes, ponds, sewage treatment plant, landfill and other engineering concrete structures (lateral bottom or wall structures upstream) waterproof and anti-seepage. The practical application is mainly used in debation pressure and smaller debation joints, expansion joints and settlement joints, with close, anchorage and concrete seal and adapt to the characteristics of expansion joints tensile debation, the structure of back stick type waterstop also can be used as ordinary waterstop, applied to cast-in-place concrete debation seam, the construction joints and concrete structure has become one of the basic engineering, to solve the problem of water leakage of the gaps of back stick type waterstop is mainly applicable to concrete structures (concrete bottom or wall outside the surface). It has the characteristics of close anchoring with concrete, water sealing and elastic tensile debation. The external waterproof belt is the first waterproof layer after the waterproof board, which is very important for the prevention of the tunnel seepage.
施工方法：
Construction b:
方法1、在止水帶背面配30mm厚木模板，模板的寬度和長度應滿足止水帶安裝的要求，木模板應與外墻整體模板連成一體，以防澆筑混凝土?xí)r木模板發生位移、漏漿，失去止水作用。同時用212in（lin=25mm）雙帽釘將外貼式橡膠止水帶與木模板固定，將雙帽釘釘在止水帶兩側最邊緣部位，每隔200mm釘雙帽釘一個。安裝好的止水帶應平整，無下垂現象，此部位在澆筑混凝土后，強度達到設計強度的80%以上方可拆模。
1, in the back of the waterstop with 30mm thick template, the b and length of the template should meet the requirements of the waterstop, wood template should integrated with external entity template, in case of pouring concrete bwork displacement, slurry leakage, loss of sealing effect. At the same time, 212in (lin=25mm) double cap nail is used to fix the outer rubber sealing strip and wood template, and the double cap nail is nailed to the most edge part of the water stop belt, and every 200mm nail double cap nail. With good water installation should be smooth, no sagging phenomenon, this part after the pouring of concrete, strength to meet the design strength of 80% to the top of demolding.
