橡膠止水帶是采用天然橡膠與各種合成橡膠為主要原料，摻加各種助劑及填充料，經塑煉，混煉，壓制成型，其品種規格較多，有橋型、山型、P型、R型、U型、Z型、乙型、T型、H型、E型、Q型等。該止水材料具有良好的彈性，耐磨性、耐老化性和抗撕裂性能，適應變形能力強、防水性能好，溫度使用范圍-45℃-+60℃。當溫度超過+70℃，以及強烈的氧化作用或受油類等有機溶劑侵蝕時，均不得使用該產品。
The rubber sealing strip is made of natural rubber and various synthetic rubber as the main raw material, and the filling material mixed with various additives, through mixing, mixing, molding, the more varieties of different specifications, bridge, mountain type, P type, R type, U type, Z type, T type, H type, type, E type and Q type etc.. The sealing material has good elasticity, wear resistance, aging resistance and tear resistance. It has good debation ability and good waterproof perbance. Its temperature range is -45 degrees centigrade and -+60 degrees centigrade. This product should not be used when the temperature is higher than +70 degrees, and it is strongly oxidized or eroded by organic solvents such as oil.
止水帶的物理性能
Physical properties of water stop strip
項目指標 BSJ
Item index BSJ
1、硬度(邵爾A)，度60±560±560±5
1, hardness (Shao A), degree 60 + 560 + 560 + 5
2、拉伸強度，MPa≥151210
2, the tensile strength, MPa = 151210
3、扯斷伸長率，% ≥380380300
3, the elongation at break,% = 380380300
4、壓縮變形70℃×24h，≤353535 23℃×168h， ≤302525
4, compression debation of 70 DEG C * 24h, * 168h less than or equal to 35353523 DEG C, 302525
5、撕裂強度，KN/m ≥302525
5, tear strength, KN/m = 302525
6、脆性溫度，℃≤-45-40-40
6, the brittle temperature, C = -45-40-40
7、熱氣空氣老化70℃×168h硬度變化(邵爾A)，度≤+8+8- 拉伸強度，MPa≥1210- 扯斷伸長率，% ≥300300- 100℃×168h硬度變化(邵爾A)，度≤+8 拉伸強度，MPa≥9 扯斷伸長率，% ≥250 8、臭氧老化50pphm:20%2級2級0級
70 c * 168h hardness change 7, hot air aging (shore A), less than or equal to +8+8- tensile strength, elongation at break of MPa = 1210-, 100 = 300300-% C * 168h hardness (shore A), less than or equal to +8 tensile strength, elongation at break of MPa = 9, 50pphm:20%2 = 2508, ozone aging% level grade 2 grade 0
9、橡膠與金屬粘合斷面在彈性體內
9, rubber and bl bonding section in the elastic body
注：B表示變形縫、S表示施工縫、J表示有耐老化性能要求的接縫用止水帶。
Note: B represents debation joint, S represents construction joint, and J represents joint sealing belt with aging resistance requirement.
