橡膠止水帶是采用天然橡膠與各種合成橡膠為主要原料，摻加各種助劑及填充料，經塑煉，混煉，
Rubber water stop belt is made of natural rubber and various synthetic rubber as main raw material, adding various auxiliaries and filling materials, through plastic refining and mixing,
壓制成型，其品種規格較多，有橋型、山型、P型、R型、U型、Z型、乙型、T型、H型、E型、Q型等。該止水材料具有良好的彈性，耐磨性、耐老化性和抗撕裂性能，適應變形能力強、防水性能好，溫度使用范圍-45℃-+60℃。當溫度超過+70℃，以及強烈的氧化作用或受油類等有機溶劑侵蝕時，均不得使用該產品。
Pressing molding, its varieties and specifications are more, there are bridge type, mountain type, P type, R type, U type, Z type, B type, T type, H type, E type, Q type and so on. The sealing material has good elasticity, wear resistance, aging resistance and tear resistance. It has good debation ability and good waterproof perbance. Its temperature range is -45 degrees centigrade and -+60 degrees centigrade. This product should not be used when the temperature is higher than +70 degrees, and it is strongly oxidized or eroded by organic solvents such as oil.
止水帶分類
Classification of water stop belt
止水帶按材料分為橡膠止水帶、塑料（PVC）止水帶、鋼板止水帶、橡膠加鋼邊止水帶。右圖為塑料PVC止水帶。
The sealing strip is divided into rubber stop belt, plastic (PVC) water stop belt, steel plate water stop belt, rubber and steel edge water stop belt according to the material. The right picture is plastic PVC water stop belt.
本產品是利用橡膠的高彈性和壓縮變形性，在各種荷載下產生彈性變形，從而起到緊固密封，有效的防止建筑構件的漏水、滲水，并起到減震緩沖作用，從而確保工程建筑物的使用壽命。分類和標記
This product is the use of rubber elasticity and high compression debation, elastic debation under various loads, so as to prevent the sealing of building components, Water Leakage seepage effectively, and play a buffer role, so as to ensure the service life of the building project. Classification and labeling
按制造材質分為： 橡膠止水帶（R），如：天然膠、氯丁膠、丁苯膠等
According to the manufacturing materials are divided into: rubber sealing tape (R), such as: natural rubber, neoprene, styrene butadiene rubber and so on
塑料止水帶（P），如：聚氯乙烯、聚乙烯等
Plastic water stop strip (P), such as PVC, polyethylene, etc.
金屬止水帶（M），如：銅、不銹鋼、碳鋼等
Metal sealing strip (M), such as copper, stainless steel, carbon steel, etc.
按用途分為：變形縫用止水帶（B）
According to use, it can be divided into: B for debation joint
施工縫用止水帶（S）
Water stop strip for construction joints (S)
有特殊耐老化要求的接縫用止水帶（J）
Joint sealing strip (J) with special aging resistance requirement
注：有鋼邊的止水帶（G，如：BG、SG、JG）
Note: a steel stop strip (G, such as BG, SG, JG)
按設置位置分為：中埋式止水帶（Z）
According to the setting b, it is divided into: Z
背貼式止水帶（T）
Back mounted water stop belt (T)
按型狀分為：平板型止水帶（中部為平板的止水帶）
According to the shape, it can be divided into: flat type water stop belt (middle part is flat plate water stop belt)
止水帶不同形狀示意圖
Schematic diagram of different shapes of water stop belt
變形型止水帶（能夠適應接縫變形的止水帶，又分為封閉型（中心孔等）和開敞型
The debation type water stop belt can adapt to joint debation, and is divided into closed type (central hole, etc.) and open type
（中心變形體不封口）兩種，開敞型包括W型、F型、Ω型、波型等）
There are two kinds of central debation body, the open type includes W type, F type, Omega type, wave type and so on
產品標記：用途-材質-位置-規格（長×寬×厚）
Product label: application material b gauge (length * b * thickness)
如：長40000mm、寬350mm、厚8mm的變形縫用中埋式橡膠止水帶標記為：
For example, the debation joint of long 40000mm, wide 350mm and thick 8mm is marked by the bded rubber water stop belt:
B-R-Z-40000×350×8
B-R-Z-40000 x 350 x 8
產品用途
Product use
主要用于基建工程、地下設施、隧道、污水處理廠、水利、地鐵等工程。
It is mainly used in infrastructure projects, underground facilities, tunnels, sewage treatment plants, water conservancy, subway and other projects.
為閘門、壩底、建筑工程、地下建筑物等伸縮縫混凝土澆制配用。 QZ系列橡膠止水帶
As the gate, bottom and building engineering, underground buildings with concrete joints. QZ series rubber water stop belt
一、產品性能與特點
First, product perbance and characteristics
本產品是利用橡膠的高彈性和壓縮變形性，在各種荷載下產生彈性變形，從而起到緊固密封，有效的防止建筑構件的漏水、滲水，并起到減震緩沖作用。從而確保工程建筑的使用壽命。
This product is the use of rubber elasticity and high compression debation, elastic debation under various loads, so as to prevent the sealing of building components, Water Leakage seepage effectively, and play a buffer role. So as to ensure the service life of the engineering building.
二、產品用途
Two, product use
a、主要用于基建工程、地下設施、隧道、涵洞、水利、地鐵等工程。
A is mainly used in infrastructure projects, underground facilities, tunnels, culverts, water conservancy, subway and other projects.
b、為閘門、壩底、建筑工程、地下建筑物等伸縮混凝土澆制配用。
B, with the gate, dam construction, underground buildings, expansion concrete.
三、產品的物理性能
Three, the physical properties of the product
項目 指標
Project index
B S J
B S J
1、硬度(邵爾A)，度 60±5 60±5 60±5
1, hardness (Shao A), degree 60 + 560 + 560 + 5
2、拉伸強度，MPa ≥ 15 12 10
2, the tensile strength, MPa = 151210
3、扯斷伸長率，% ≥ 380 380 300
3, the elongation at break,% = 380380300
4、壓縮永久變形 70℃×24h, ≤ 35 35 35
4, compression permanent debation of 70 DEG C * 24h = 353535
23℃×168h, ≤ 30 25 25
23 c * 168h = 302525
5、撕裂強度，KN/m ≥ 30 25 25
5, tear strength, KN/m = 302525
6、脆性溫度，℃ ≤ -45 -40 -40
6, the brittle temperature, C = -45 -40 -40
7、熱氣空氣老化 70℃×168h 硬度變化(邵爾A)，度 ≤ +8 +8 -
70 c * 168h hardness change 7, hot air aging (shore A), is less than or equal to +8 - +8
拉伸強度，MPa ≥ 12 10 -
The tensile strength, MPa = 1210 -
扯斷伸長率,% ≥ 300 300 -
Elongation of not less than 300300 -%
100℃×168h 硬度變化(邵爾A)，度 ≤ +8
100 c * 168h hardness (shore A), is less than +8
拉伸強度，MPa≥ 9
The tensile strength, MPa = 9
