DP6070-6R0詳細介紹
DP6070-6R0
1/8 DIN溫度面板儀表
DP6070 Series
1/8 DIN溫度面板儀表
模塊化的USB，RS232，RS485串行通信選項和繼電器
J，K，T，E，R，S，B，N，C熱電偶
100或1000ù鉑，10ù銅，鎳120ùRTDS
1或0.1°分辨率
自動冷端補償
NEMA 4X（IP65）前
通用的85到265 VAC或12 / 24 VDC輸入功率
大型雙行6-character顯示，15和12毫米（0.60和0.46）
陽光下可讀的顯示模式
2或4個繼電器和孤立的4至20 mA輸出選項
外部4中繼和數字I/O擴展模塊
使用自由軟件，監控和編程
The DP6070 temperature meter boasts specifications and functionality that bly makes it one of the most advanced temperature meters available. It’s dual-line 6-character display, function keys, and optional expansion modules are only a few of the special features available. The DP6070 accepts many thermocouple types and RTDs and can be configured to have either a 1° or 0.1° display resolution on any type of sensor b. The lower display makes configuration simpler. The display itself is quite configurable. There are many relay functions for up to 8 relays; including an Interlock Relay function. The 4 to 20 mA output can represent up to 12 different beters/variables. This makes the DP6070 one of the most versatile meters on the market. Sunlight readable display models have an extraordinarily bright LED display. The upper display can be programmed to indicate current temperature, maximum or minimum temperature, alternating maximum/minimum temperatures, one of eight alarm set points, or Modbus b. The lower display can also be configured to display engineering units, set points, user defined legends, or simply turned off. Input selection and configuration are conveniently set up via rear switches and front panel programming. Three levels of password protection help maintain the reliability of the programming.
規格：
Display: Both displays are 6 digits (-99999 to 999999), red LEDs with leading zero blanking
Upper Display: 15 mm (0.60") high
Lower Display: 12 mm (0.46") high
Display Intensity: 8 intensity levels
Display Update Rate: 5/second (200 ms)
Overrange: Display flashes 999999
Underrange: Display flashes -99999
Display Assignment: The upper and lower displays may be assigned to PV1, PV2, PCT (percent), max/min, alternate max and min, set points, units (lower display only), or Modbus b
Front Panel: NEMA 4X (IP65)
Programming Methods: 4 front panel buttons, digital bs, PC and software, Modbus registers, or cloning using copy function
Noise Filter: Programmable from 2 to 199 (0 will disable filter)
Filter Bypass: Programmable from 0.1 to 99.9% of calibrated span
Recalibration: Calibrated at the factory. Recalibration is recommended at least every 12 months
Max/Min Display: Max (peak)/min (valley) readings reached by the process are stored until reset by the user or until power to the meter is cycled
Password: 3 programmable passwords restrict modification of programmed settings; Pass 1: Allows use of function keys and digital bs; Pass 2: Allows use of function keys, digital bs and editing set/reset points; Pass 3: Restricts all programming, function keys, and digital bs
Non-Volatile Memory: All programmed settings are stored in non-volatile memory for a minimum of ten years if power is lost
Power Options: 85 to 265 Vac 50/60 Hz, 90 to 265 Vdc, 20 W maximum, or jumper selectable 12/24 Vdc ±10%, 15 W max
Fuse (External, Required): UL recognized, 5 A max, slow blow; up to 6 meters may share one 5 A fuse,br> Isolated Transmitter Power Supply: 24 Vdc ±5% @ 200 mA maximum (standard), (12/24 Vdc powered models rated @ 100 mA maximum); 5 or 10 Vdc @ 50 mA maximum, selectable with internal jumper J4
Normal Mode Rejection: Greater than 60 dB at 50/60 Hz
Isolation: 4 kV b/output-to-power line; 500V b-to-output or output-to-P+ supply
Overvoltage Category: Installation overvoltage category II, local level with smaller transient overvoltages than installation overvoltage category III
Operating Temperature Range: -40 to 65°C (-40 to 149°F)
Storage Temperature Range: -40 to 85°C (-40 to 185°F)
Relative Humidity: 0 to 90% non-condensing
Connections: Removable screw terminal blocks accept 12 to 22 AWG wire, RJ45 for external relays, digital I/O, and serial communication adaptors
Enclosure: 1/8 DIN, high impact plastic, UL 94V-0, color: black
Mounting: 1/8 DIN panel cutout required: 92 x 45 mm (3.622 x 1.772"); two panel mounting bracket assemblies are provided
Tightening Torque: Screw terminal connectors: 5 lb-in (0.56 Nm)
Overall Dimensions: 119 W x 62 H x 143 mm D (4.68 x 2.45 x 5.64")
Weight: 269 g (9.5 oz)
注釋: Comes complete with 2 side mounting brackets and operator’s manual.
產品型號說明：
(1)
DP6070 -
選項描述
(1) Output
選擇
6R0 代表 Temperature panel meter
6R2 代表 Temperature panel meter with 2 relays
6R3 代表 Temperature panel meter with 4 to 20 mA output
6R4 代表 Temperature panel meter with 4 relays
6R5 代表 Temperature panel meter with 2 relays and 4 to 20 mA output
6R7 代表 Temperature panel meter with 4 relays and 4 to 20 mA output
6H0 代表 Temperature panel meter
6H2 代表 Temperature panel meter with 2 relays
6H3 代表 Temperature panel meter with 4 to 20 mA output
7H0 代表 Temperature panel meter
7H2 代表 Temperature panel meter with 2 relays
7H3 代表 Temperature panel meter with 4 to 20 mA output
DP6070-6R0
DP6070-6R0 相關產品
DP6070-6R0 技術文章
