阿拉善150*200*35矩形板式橡膠支座
支座是指用以支承容器或設(shè)備的重量，并使其固定于一定位置的支承部件，還要承受操作時的振動與地震載荷。橡膠支座是橡膠和薄鋼板緊密結(jié)合而成，用于支撐橋梁重量。
A support is a supporting component that supports the weight of a container or device and holds it to a certain b. It also bears vibration and seismic loads during operation. A rubber bearing is a tight combination of rubber and thin steel plates used to support bridge weight.The plate rubber bearing is a kind of bridge support product made of multilayer natural rubber and at least two layers of thin steel plate with the same thickness.
阿拉善150*200*35矩形板式橡膠支座
(1) perbance: This product is made of multilayer rubber sheet and inlaid with thin steel plate. It is vulcanized and compressed under certain pressure, certain temperature and certain time. There are enough vertical stiffness to bearing vertical load, the upper structure of the beam plate can be reliably transferred to the pier force, good flexibility, in order to adapt to the rotation of the beam end; and to meet the horizontal displacement of upper beam structure of large shear debation.
阿拉善150*200*35矩形板式橡膠支座
Referred to as PTFE slide bridge bearings, this product is in the ordinary plate rubber bearings on a thick layer of 2-3mm PTFE plate. In addition to the vertical with normal rubber bearing stiffness and elastic debation under vertical load and can adapt to the rotation of the outer end of the beam, because of low coefficient of friction between the steel plate and beam bottom tetrafluoroethylene (U = 0.03) the horizontal displacement of the upper structure of the bridge is not restricted, span >30 meters long span bridge, continuous beam bridge and multi span continuous beam bridge can be used as a movable support; continuous beam pushing and shifting of T beam and large equipment can use the slider slip.
阿拉善150*200*35矩形板式橡膠支座
