| 規格級別 | 其它 其它 通用 | 外觀顏色 | 黑色 |
| 該料用途 | |||
| 備注說明 | 特性：UL 94HB，一般射出成形用，低粘底 | ||
| 加工條件 |
| 性能項目 | 試驗條件[狀態] | 測試方法 | 測試數據 | 數據單位 | ||
| 基本性能 | 熔體流動速率 | --- | ASTM D-1238 | 10.5 | g/10min | |
| 吸水率 | --- | ASTM D-570 | 0.15 | % | ||
| 物理性能 | 模具收縮率 | 3.2mm | ASTM D-955 | 5-7 | 10-3 | |
| 比重 | --- | ASTM D-792 | 1.2 | --- | ||
| 機械性能 | 沖擊強度 | 缺口23°C | ASTM D-256 | 800 | J/m | |
| 彎曲模量 | --- | ASTM D-790 | 2343 | MPa | ||
| 洛氏硬度 | R | ASTM D-785 | 118 | --- | ||
| 拉伸強度 | 屈服點 | --- | ASTM D-638 | 62 | MPa | |
| 斷裂點 | --- | ASTM D-638 | 69 | MPa | ||
| 彎曲強度 | --- | ASTM D-790 | 96 | MPa | ||
| 拉伸率 | 斷裂點 | ASTM D-638 | 130 | % | ||
| 電氣性能 | 介電常數 | 60Hz | ASTM D-150 | 3.17 | --- | |
| 介電常數 | 1MHz | ASTM D-150 | 2.96 | --- | ||
| 損耗因數 | 1MHz | ASTM D-150 | 0.01 | --- | ||
| 損耗因數 | 60Hz | ASTM D-150 | 0.0009 | --- | ||
| 體積電阻率 | --- | ASTM D-257 | 1.0×1017 | Ω.cm | ||
| 熱性能 | 線膨脹系數 | --- | ASTM E-831 | 6.8×10-5 | 1/℃ | |
| 熱變形溫度 | 1.82MPa | ASTM D-648 | 132 | ℃ | ||
| 維卡軟化點 | --- | ASTM D-1525 | 154 | ℃ | ||
| 熱變形溫度 | 0.45MPa | ASTM D-648 | 137 | ℃ | ||
