|
ERNiCr-3 is designed for the welding of alloys 600,601 and 800 to themselves, for the clad | ||||||
| side of joints in steel clad with nickel-chromium- iron alloys and for dissimilar welding of | ||||||
| nickel-based alloys. It is also utilized to oin carbon steels to nickel alloys and carbon steels. | ||||||
| Arcos 382 provides high strength and good corrosion resistance, resists oxidation and | ||||||
| delivers creep-ruptrue strength at elevated temperatures. | ||||||
| CLASSIFICATIONS: | ||||||
| ERNICr-3 | ||||||
| AWS A5.14 | ||||||
| ASME SFA 5.14 | ||||||
| UNS N06082 | ||||||
| APPROVALS: | ||||||
| MIL-E-21562 | ||||||
| MIL-EN/RN82 | ||||||
| APPLICATIONS: | ||||||
| Formulated to resist pitting corrosion and stress-corrosion cracking in chloride containing | ||||||
| environments, ERNICr-3 is ideal for welding in desalination plans.it is also well suited for | ||||||
| welding in a variety of temperatures-from cryogenic to elevated-in such applications as | ||||||
| piping,furnace equipment,and perto-chemical and power generation plants. | ||||||
| DIAMETERS: | ||||||
| 0.035'', 0.045'', 0.063'', | ||||||
| 3/32'', 1/8'', 5/32'', | ||||||
| 3/16'' | ||||||
| TYPICAL | ||||||
| MECHANICAL PROPERTIES: | ||||||
| TENSILE STRENGTH(PSI) 80,000 | ||||||
| PERCENT ELONGATION 30 | ||||||
| TYPICAL | ||||||
| CHEMICAL COMPOSITION: | ||||||
| C | Mn | P | S | Si | Ni | |
| 0.05 | 3.00 | 0.001 | 0.002 | 0.15 | 73.20 | |
| Cr | Fe | Ti | Cb+Ta | |||
| 19.40 | 1.20 | 0.36 | 2.50 | |||
