請注意，在處理探測器的引線時需要小心謹慎，正確使用腕帶接地將有助于防止產品損壞。同時，該模塊可能包含一定數量的數字輸入通道，用于接收數字信號，如開關、傳感器或其他數字設備。
It is an output communication module mainly used for communication of events such as fires and faults.
This module has communication capabilities for 200 events (including fires, malfunctions, resets, etc.), and is equipped with at least 486 type PCs and appropriate PC software for communication. In terms of installation, it is necessary to choose a b with good visibility and no line of sight blockage for the detector, and it is usually recommended to install it in corners and ceilings. At the same time, it is necessary to maintain a distance of at least 1.2 meters between the detector and the wall to avoid the impact of heat sources on the detector.
When fixing the detector, it is recommended to keep the detector consistent with the type of housing material, such as using screws, rivets, etc. on the mounting bracket for fixation. If the installation surface is polypropylene, hot welding can be used to fix the bracket. Slide the housing onto the mounting bracket until it locks into place. Each 'lead' needs to be connected to an appropriate connection, which can be wired according to the details in Table 1 of Section 6.
Please note that caution is required when handling the leads of the detector. Proper use of wrist strap grounding will help prevent product damage. At the same time, the module may contain a certain number of digital b channels for receiving digital signals, such as switches, sensors, or other digital devices.
