西門子模塊代理商|渭南西門子模塊代理商
西門子模塊代理商|渭南西門子模塊代理商
西門子的經典分析儀系列 6 已在全球客戶公司使用多年并久經考驗。
可以用于測量紅外線激活成分的高選擇性測量,如測量 CO, CO2, NO, SO2, NH3, H2O, CH4 和其它碳?xì)浠衔?。ULTRAMAT 6 是一款 19 英寸形式的高端分析儀,外殼十分堅固,適合在惡劣環境中使用。通常,其應用領域包括過程領域中使用的所有類型的排放測量。這些分析儀可用于控制生產過程和保證產品質量,即使存在高腐蝕性的氣體時也如此。
用于在復雜應用中對紅外線激活成分和樣氣進行組合測量。
用于在復雜應用中根據順磁性原理測量氧氣濃度。OXYMAT 6 可按照順磁交變壓力原理來測量氧氣。這種測量可保證絕對線性度,并能在一個裝置中使用 0-0.5% 的超低量程(檢測限為 50 vpm)、最多可達0-100% 甚至 99.5-100% 。
氣路中所采用的材料允許分析儀測量腐蝕性混合氣體。檢測器單元不與樣氣接觸,從而可在惡劣環境中使用,同時保證較長使用壽命。
用于在標準應用中根據順磁性原理測量氧氣濃度。環境空氣可用作 OXYMAT 61 的參比氣體??諝馐怯杉稍诜治鰞x外殼內的一個泵提供的。
用于通過 ZrO2 傳感器測定跟蹤范圍內的氧氣濃度。OXYMAT 64 可用于測量濃度極低的氧濃度,測量的濃度可低至 0-10 vpm 量程。在空氣分離系統中,這種測量能力尤其令人感興趣。根據具體應用,可以選擇催化惰性 ZrO2 傳感器或催化活性 ZrO2 傳感器。
適合通過測量導熱率來測定數字混合物中氫氣和惰性氣體濃度。CALOMAT 6 具有高動態測量范圍(例如,0 … 1% 和 0 … 100% H2,可設置)以及較短的 T90 時間。
CALOMAT 62 是一種專門針對含有腐蝕性氣體的應用設計的熱導率分析儀。它可以直接測量 Cl2、HCl 和 NH3 等氣體組分的濃度,并可以測量腐蝕性氣氛中 H2 和 N2 等氣體的濃度。
用于根據火焰電離原理測量總烴量。
FIDAMAT 型分析儀的應用領域變化很大。它既可以監視超純氣體中的痕量烴類(因?yàn)樗直媛矢?,響?yīng)因子的差別較?。挚梢詼y(cè)量 % 濃度范圍的總烴。
樣氣氣路和檢測器的工作溫度可在很寬范圍調節,這樣也可以在高達 100% 的水蒸氣濃度下測量高沸點混合物和烴類。
TULTRAMAT 6 型單通道或雙通道紅外氣體分析儀,采用交變 NDIR 雙光束測量原理,具有高度的選擇性,測量那些紅外吸收波段在 2~9 μm 范圍內的氣體,例如:CO,CO2, NO, SO2, NH3, H2O as well as CH4 以及其它碳?xì)浠衔铩?
單通道分析儀可同時測量最多 2 個氣體組分,而雙通道分析儀可同時測量 3 個(或 4 個,根據要求)氣體組分。
High selectivity with double-layer detector and optical coupler
Low detection limits
Corrosion-resistant materials in gas path (option)
Analyzer cells can be cleaned as required on site
Electronics and physics: gas-tight isolation, purging is possible, IP65
Heated versions (option)
Ex(p) for Zones 1 and 2 (in accordance with to ATEX 2G and ATEX 3G)
Special applications
Besides the standard combinations, special applications concerning material in the gas path, material in the sample chambers (e.g. Titan, Hasbloy C22) and measured components are also available on request
Perbance-tested version / QAL
For measurements of CO, NO, SO2 and O2 according to sections 13 and 27 of the German Federal Immission Protection Regulations and TA Luft, perbance-tested versions according to EN 15267 are available.
Certified measuring range:
In addition, perbance-tested versions of the ULTRAMAT 6 meet the requirements set forth in EN 14956 and QAL1 according to EN 14181. Conbity of the analyzers with both standards is TüV-certified.
Determination of the analyzer drift according to EN 14181 (QAL3) can be carried out manually or also with a PC using the SIPROM GA maintenance and servicing software. In addition, selected manufacturers of emission buation computers offer the possibility for downloading the drift data via the analyzer's serial interface and to automatically record and process it in the buation computer.
Flow-type reference cell
RS 485 present in the basic unit (connection at the rear; for the rack unit also behind the front plate).
Options
ULTRAMAT 6, membrane keyboard and graphic display
Gas path |
19" rack unit |
Field device |
Field device Ex |
|
---|---|---|---|---|
With hoses |
Bushing |
Stainless steel, mat. no. 1.4571 |
Stainless steel, mat. no. 1.4571 |
- |
Hose |
FKM (e.g. Viton) |
FKM (e.g. Viton) |
- |
|
Sample chamber: |
||||
|
Aluminum |
Aluminum |
- |
|
|
Aluminum |
Aluminum |
- |
|
|
Stainless steel, mat. no. 1.4571 O-ring: FKM (e.g. Viton) or FFKM (Kalrez) |
Stainless steel, mat. no. 1.4571 O-ring: FKM (e.g. Viton) or FFKM (Kalrez) |
- |
|
|
CaF2, adhesive: E353, O-ring: FKM (e.g. Viton) or FFKM (Kalrez) |
CaF2, adhesive: E353, O-ring: FKM (e.g. Viton) or FFKM (Kalrez) |
- |
|
With pipes |
Bushing |
Titanium |
Titanium |
Titanium |
Pipe |
Titanium O-ring: FKM (e.g. Viton) or FFKM (Kalrez) |
Titanium O-ring: FKM (e.g. Viton) or FFKM (Kalrez) |
Titanium O-ring: FKM (e.g. Viton) or FFKM (Kalrez) |
|
Sample chamber: |
||||
|
Aluminum |
Aluminum |
Aluminum |
|
|
Tantalum (only for cell length 20 … 180 mm) |
Tantalum (only for cell length 20 … 180 mm) |
Tantalum (only for cell length 20 … 180 mm) |
|
|
CaF2, adhesive: E353, O-ring: FKM (e.g. Viton) or FFKM (Kalrez) |
CaF2, adhesive: E353, O-ring: FKM (e.g. Viton) or FFKM (Kalrez) |
CaF2, adhesive: E353, O-ring: FKM (e.g. Viton) or FFKM (Kalrez) |
|
With pipes |
Bushing |
Stainless steel, mat. no. 1.4571 |
Stainless steel, mat. no. 1.4571 |
Stainless steel, mat. no. 1.4571 |
Pipe |
Stainless steel, mat. no. 1.4571 O-ring: FKM (e.g. Viton) or FFKM (Kalrez) |
Stainless steel, mat. no. 1.4571 O-ring: FKM (e.g. Viton) or FFKM (Kalrez) |
Stainless steel, mat. no. 1.4571 O-ring: FKM (e.g. Viton) or FFKM (Kalrez) |
|
Sample chamber: |
||||
|
Aluminum |
Aluminum |
Aluminum |
|
|
Aluminum or tantalum (tantalum only for cell length 20 … 180 mm) |
Aluminum or tantalum (tantalum only for cell length 20 … 180 mm) |
Aluminum or tantalum (tantalum only for cell length 20 … 180 mm) |
|
|
CaF2, adhesive: E353, O-ring: FKM (e.g. Viton) or FFKM (Kalrez) |
CaF2, adhesive: E353, O-ring: FKM (e.g. Viton) or FFKM (Kalrez) |
CaF2, adhesive: E353, O-ring: FKM (e.g. Viton) or FFKM (Kalrez) |
Gas path |
19" rack unit |
Field device |
Field device Ex |
|
---|---|---|---|---|
Flow indicator |
Measuring tube |
Duran glass |
- |
- |
Variable area |
Duran glass |
- |
- |
|
Suspension boundary |
PTFE (Teflon) |
- |
- |
|
Angle units |
FKM (e.g. Viton) |
- |
- |
|
Pressure switch |
Diaphragm |
FKM (e.g. Viton) |
- |
- |
Enclosure |
PA 6.3T |
- |
- |
Gas path |
19" rack unit |
Field device |
Field device Ex |
|
---|---|---|---|---|
With pipes |
Bushing |
e.g. Hasbloy C22 |
e.g. Hasbloy C22 |
e.g. Hasbloy C22 |
Pipe |
e.g. Hasbloy C22 O-ring: FKM (e.g. Viton) or FFKM (Kalrez) |
e.g. Hasbloy C22 O-ring: FKM (e.g. Viton) or FFKM (Kalrez) |
e.g. Hasbloy C22 O-ring: FKM (e.g. Viton) or FFKM (Kalrez) |
|
Sample chamber: |
||||
|
e.g. Hasbloy C22 |
e.g. Hasbloy C22 |
e.g. Hasbloy C22 |
|
|
CaF2, without adhesive O-ring: FKM (e.g. Viton) or FFKM (Kalrez) |
CaF2, without adhesive O-ring: FKM (e.g. Viton) or FFKM (Kalrez) |
CaF2, without adhesive O-ring: FKM (e.g. Viton) or FFKM (Kalrez) |
Gas path ULTRAMAT 6, single-channel unit, 19" rack unit, with flow-type reference cell (option)
Gas path ULTRAMAT 6, dual-channel unit, 19" rack unit
Legend for the figures "Gas path (19" rack unit)" |
|||
---|---|---|---|
1 |
Sample gas inlet channel 1 |
8 |
Restrictor |
2 |
Sample gas outlet channel 1 |
9 |
Purging gas inlet |
3 |
Reference gas outlet (option) |
10 |
Connection of atmospheric pressure sensor |
4 |
Reference gas inlet (option) |
11 |
Atmospheric pressure sensor |
5 |
Sample gas inlet channel 2 |
12 |
Flow indicator in sample gas path (option) |
6 |
Sample gas outlet channel 2 |
13 |
Pressure switch in sample gas path (option) |
7 |
IR physical system |
Gas path ULTRAMAT 6, field device, with flow-type reference cell (option)
西門子模塊代理商|渭南西門子模塊代理商 西門子模塊代理商|渭南西門子模塊代理商