西門子電源模塊6SL3130-6AE15-0AB1
SINAMICS S120 Smart Line Module 輸入：3AC 380-480V,50/60Hz 輸出:600V DC，8.3A，5kW 結構形式：書本尺寸 內部風冷 包括控制電壓適配器 組件 涂漆.
西門子代理商供應 現貨
6SL3130-6AE15-0AB1
西門子代理商現貨供應
原裝正品 質保一年
上海斌勤電氣技術有限公司
發布人：康奎 （銷售經理）發布
本公司簽約正式的銷售合同，并開具13%的增-值-稅-發-票。
外地客戶統一采用快遞發貨,也支持上門提貨，貨物快遞到您手時候,一定要開箱檢驗!如有損壞,請拒絕簽收,并由快遞公司返回!
在你簽收后表示你對該貨物沒有異議!我們會給予您檢測時間,并請在貨物到給予確認,謝謝合作!
產品均為密封包裝，外包裝詳見產品圖片，白色標簽上均有產品訂貨號和產地，各位買家在收到貨后，請核對型號，無誤后再拆包裝、
本公司宗旨：本著以誠信為本，以顧客為中心.質量保證·服務誠信·價格實惠.
為用戶提供專業的自動化產品及服務！
相關西門子產品技術：
Smart Line Modules in booksize bat
產品信息
跳轉到
概述
設計
集成
技術規范
特性曲線
概述
Smart Line Modules are stall-protected, line-commutated infeed/regenerative feedback units (diode bridge for incoming supply; stall-protected, line-commutated regenerative feedback via IGBTs) with 100 % continuous regenerative feedback power. The regenerative feedback capability of the modules can be deactivated by means of a digital b (Smart Line Modules 5 kW and 10 kW) or by means of beterization (Smart Line Modules 16 kW, 36 kW and 55 kW). Smart Line Modules are designed for connection to grounded TN/TT systems and non-grounded IT systems.
The DC b is pre-charged via integrated precharging resistors.
The associated line reactor is required for operating a Smart Line Module.
設計
The Smart Line Modules in booksize bat feature the following connections and interfaces as standard:
1 power connection via screw-type terminals
1 connection for the 24 V DC electronics power supply via the 24 V terminal adapter included in the scope of supply
1 DC b connection via integrated DC b busbars
2 PE (protective earth) connections
2 digital bs
(only for Smart Line Modules 5 kW and 10 kW)
1 digital output
(only for Smart Line Modules 5 kW and 10 kW)
3 DRIVE?CLiQ sockets
(only for Smart Line Modules 16 kW, 36 kW and 55 kW)
1 temperature sensor b for KTY84?130, Pt1000 or PTC (only for Smart Line Modules 16 kW, 36 kW and 55 kW, Pt1000 can be used from firmware V4.7 HF17)
The status of the Smart Line Modules is indicated via two multi-color LEDs.
The signal cable shield can be connected to the Line Module by means of a shield connection terminal, e.g. Weidmüller type KLBü 3-8 SC.
The scope of supply of the Smart Line Modules includes:
DRIVE?CLiQ cable for connecting the module to the adjacent Control Unit on the left with the drive control, length 0.11 m (4.33 in)
(only for Smart Line Modules 16 kW, 36 kW and 55 kW)
2 blanking plugs for closing unused DRIVE-CLiQ sockets
(only for Smart Line Modules 16 kW, 36 kW and 55 kW)
DRIVE?CLiQ cable (length depends on Smart Line Module b) for connection to the adjacent Motor Module, length = b of Smart Line Module + 0.11 m (4.33 in)
Jumper for connecting the 24 V DC busbar to the adjacent Motor Module
24 V terminal adapter (X24)
Connector X21 for digital bs and outputs
Connector X22 for digital bs and outputs
(only for Smart Line Modules 5 kW and 10 kW)
Connector X1 for line connection
(only for Smart Line Modules 5 kW and 10 kW)
1 set of warning labels in 30 languages
