| 密度 | 0.882 | g/cm | ExxonMobil Method |
| 霧度2 | 13@50mils | % | ASTM D-1003 |
| 熔融指數(shù) | 10.0 | g/10 min | ASTM D-1238 |
| 熔體流動速率 | 25 | g/10 min | ASTM D-1238 |
| 硬度2 | ASTM D-2240 | ||
| (Shore D,15 sec) | 27 | ||
| (Shore A,15 sec) | 79 |
| 拉伸強度3 (@Break) | No Break | psi(MPa) | ASTM D-638 |
| 缺口沖擊強度 (-40℃) | No Break | ft-lb/in(J/m) | ASTM D-256 |
| 彎曲模量 (1% secant) | 3807(26.2) | psi(MPa) | ASTM D-790 |
| 缺口沖擊強度 (23℃) | No Break | ft-lb/in(J/m) | ASTM D-256 |
| 拉伸率 (@Break) | No Break | % | ASTM D-638 |
| 高熔體溫度 | 164.7(73.7) | ℉(℃) | ExxonMobil Method |
| 維卡軟化點2 (200g) | 159.8(71.0) | ℉(℃) | ASTM D-1525 |
| 拉伸應力5 | ASTM D-412 | ||
| (@ Elongation) | 407(2.8) | psi(MPa) | |
| (@300% Elongation) | 493(3.4) | psi(MPa) | |
| 門尼粘度ML(1+4) (125℃) | 5.9 | Torgue Units | ASTM D-1646 |
| 抗扯強度 | 245.9(43.1) | lb/in(kN/m) | ASTM D-624 |
| 拉伸率 (@Break) | No Break | % | ASTM D-412 |
