| 性能項目 | 試驗條件[狀態(tài)] | 測試方法 | 干燥 | 調節(jié)后的 | 數據單位 | |
| 物理性能 | 比重 | ASTMD792 | 1.33 | g/cm3 | ||
| ISO1183 | 1.32 | g/cm3 | ||||
| 收縮率 | 流動:3.20mm | Internal Method | 0.40 | % | ||
| 橫向流動:3.20mm | Internal Method | 1.2 | % | |||
| 橫向流量:2.00 mm | ISO294-4 | 0.80 | % | |||
| 流量:2.00 mm | ISO294-4 | 0.30 | % | |||
| 吸水率 | 23℃,24hr | ISO62 | 0.83 | % | ||
| 機械性能 | 拉伸模量 | 23℃ | ISO527-2 | 8700 | 5800 | MPa |
| 拉伸應力 | 斷裂,23℃ | ISO527-2 | 142 | 95.0 | MPa | |
| 23℃ | ASTMD638 | 145 | 110 | MPa | ||
| 斷張率 | 23℃ | ISO527-2 | 4.0 | 5.0 | % | |
| 彎曲模量 | 23℃ | ASTMD790 | 6900 | 5070 | MPa | |
| 23℃ | ISO178 | 7400 | 5200 | MPa | ||
| 簡支梁缺口沖擊強度 | -40℃ | ISO179/1eA | 13 | 13 | kJ/m2 | |
| 23℃ | ISO179/1eA | 20 | 22 | kJ/m2 | ||
| 簡支梁缺口沖擊強度 | 23℃ | ISO179/1eU | 91 | 80 | kJ/m2 | |
| 懸臂梁缺口沖擊強度 | 23℃ | ASTMD256 | 220 | 240 | J/m | |
| -40℃ | ISO180/1A | 15 | 10 | kJ/m2 | ||
| -30℃ | ISO180/1A | 14 | 10 | kJ/m2 | ||
| 23℃ | ISO180/1A | 21 | 20 | kJ/m2 | ||
| 熱性能 | 熱變形溫度 | 0.45MPa, 未退火 | ISO75-2/B | 262 | ℃ | |
| 1.8MPa, 未退火 | ASTMD648 | 250 | ℃ | |||
| 1.8MPa, 未退火 | ISO75-2/A | 247 | ℃ | |||
| 熔融溫度 | ISO11357-3 | 262 | ℃ | |||
| ASTMD3418 | 263 | ℃ | ||||
| RTIEle | 0.75mm | UL746 | 120 | ℃ | ||
| 1.50mm | UL746 | 120 | ℃ | |||
| 3.00mm | UL746 | 120 | ℃ | |||
| RTIImp | 0.75mm | UL746 | 65 | ℃ | ||
| 1.50mm | UL746 | 105 | ℃ | |||
| 3.00mm | UL746 | 105 | ℃ | |||
| RTIStr | 0.75mm | UL746 | 85 | ℃ | ||
| 1.50mm | UL746 | 95 | ℃ | |||
| 3.00mm | UL746 | 105 | ℃ | |||
| 電氣性能 | 相比耐漏電其痕指數 | 3.00mm | UL746 | 600 | V | |
| 漏電其痕指數 | 3.00mm | IEC60112 | PLC0 | |||
| 可燃性 | UL阻燃等級 | 0.750mm | IEC60695-11-10，-20 | HB | ||
| 1.50mm | IEC60695-11-10，-20 | HB | ||||
| 3.00mm | IEC60695-11-10，-20 | HB | ||||
| 灼熱絲易燃指數 | 0.750mm | IEC60695-2-12 | 650 | ℃ | ||
| 1.50mm | IEC60695-2-12 | 650 | ℃ | |||
| 3.00mm | IEC60695-2-12 | 775 | ℃ | |||
| 熱燈絲點火溫度 | 0.750mm | IEC60695-2-13 | 675 | ℃ | ||
| 1.50mm | IEC60695-2-13 | 675 | ℃ | |||
| 3.00mm | IEC60695-2-13 | 725 | ℃ | |||
| 極限氧指數 | ISO4589-2 | 23 | % | |||
