| 模塑收縮量 (flow,0.125") | 5-7 | in/in E-3 | ASTM D955 |
| 比重 (固體) | 1.14 | ASTM D 792 | |
| 熔體流動速率 (標稱,260C/5.0 kgf) | 9.0 | g/10min | ASTM D 1238 |
| 吸水率 | ASTM D 570 | ||
| 0.100 | % | ||
| 0.40 | % |
| 撓曲模量 (0.125") | 340000 | psi | ASTM D 790 |
| 抗拉強度 (屈服,類型I,0.125") | 8200 | psi | ASTM D638 |
| 撓曲強度 (屈服,0.125") | 12500 | psi | ASTM D 790 |
| 拉伸模量 (類型I,0.125") | 320000 | psi | ASTM D 638 |
| 拉伸伸長 | ASTM D 638 | ||
| (類型I,0.125") | 5.0 | % | |
| (類型I,0.125") | 150.0 | % |
| 溫度 | |||
| 500-550 | deg F | ||
| 500-550 | deg F | ||
| 490-550 | deg F | ||
| 490-550 | deg F | ||
| 480-540 | deg F | ||
| 170-210 | deg F | ||
| 推薦注射量 | 30-80 | % | |
| 螺桿速度 | 40-70 | rpm | |
| 干燥時間 | |||
| 3-4 | h | ||
| 8 | h | ||
| 合模力噸數 | 3-5 | tons/psi | |
| 背壓 | 50-100 | psig | |
| 含濕量(大) | 0.04 | % | |
| 排氣槽深度 | 0.0015-0.0030 | inch | |
| 干燥溫度 | 210-220 | deg F |
| 導熱率 | 0.20 | W/m-℃ | ASTM C 177 |
| CTE(熱膨脹系數) (xflow,-40F-100F) | 4 | E-5in/in-F | ASTM E 831 |
| 維卡軟化溫度 (B級) | 255 | deg F | ASTM D 648 |
| HDT(熱畸變溫度) | ASTM D 648 | ||
| 225 | deg F | ||
| 230 | deg F |
| 儀表控制抗沖擊總能量 | ASTM D 3763 | ||
| 540 | in-lbs | ||
| 480 | in-lbs | ||
| 缺口伊佐德沖擊值 | ASTM D 256 | ||
| 12.0 | ft-lb/in | ||
| 10.0 | ft-lb/in |
