Photoelectric sensors | ||||||||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||||
Features | |||
![]() |
Sensor/detection principle: | Photoelectric proximity sensor, Background blanking |
![]() |
![]() |
Dimensions (W x H x D): | 11 mm x 31 mm x 20 mm |
![]() |
![]() |
Housing design (light emission): | Rectangular, Slim |
![]() |
![]() |
Sensing range max.: | 4 mm ... 140 mm 1) |
![]() |
![]() |
Sensing range: | 10 mm ... 100 mm |
![]() |
![]() |
Type of light: | Visible red light |
![]() |
![]() |
Light source: | LED 2) |
![]() |
![]() |
Wave length: | 680 nm |
![]() |
![]() |
Light spot diameter (distance): | Ø 8 mm (90 mm) |
![]() |
![]() |
Sensitivity adjustment: | Potentiometer, 270° |
![]() |
![]() |
Focus adjustable: | - |
![]() |
![]() |
1) Object with 90 % reflectance (referred to standard white DIN 5033) 2)Average service life of 100,000 h at TA = +25 °C |
![]() |
Mechanics/electronics | |||
![]() |
Supply voltage: | 10 V DC ... 30 V DC 1) |
![]() |
![]() |
Ripple: | ± 10 % 2) |
![]() |
![]() |
Power consumption: | ≤ 30 mA 3) |
![]() |
![]() |
Output type: | PNP, Light/dark-switching, manually selectable, open collector |
![]() |
![]() |
Signal voltage PNP HIGH / LOW: | UV - 1,8 V / ca. 0 V |
![]() |
![]() |
Output current Imax.: | 100 |
![]() |
![]() |
Response time: | ≤ 0.5 ms 4) |
![]() |
![]() |
Switching frequency: | 1,000 5) |
![]() |
![]() |
Connection type: | Cable, 3-wire, 2 m 6) |
![]() |
![]() |
Cable material: | PVC |
![]() |
![]() |
Conductor cross-section: | 0.18 mm² |
![]() |
![]() |
Circuit protection: | A, B, D 7) 8) 9) |
![]() |
![]() |
Weight: | 53 g |
![]() |
![]() |
Housing material: | ABS/PC/POM |
![]() |
![]() |
Optics material: | PMMA |
![]() |
![]() |
Enclosure rating: | IP 65 |
![]() |
![]() |
Items supplied: | Stainless steel mounting bracket (1.4301/304) BEF-W100-A |
![]() |
![]() |
Ambient operating temperature: | -25 °C ... 55 °C |
![]() |
![]() |
Ambient storage temperature: | -40 °C ... 70 °C |
![]() |
![]() |
1) Limit values, operation in short-circuit protected network max. 8 A 2) May not exceed or fall short of VS tolerances 3) Without load 4) Signal transit time with resistive load 5) With light/dark ratio 1:1 6) Do not bend below 0 °C 7) A = VS connections reverse-polarity protected 8) B = bs and output reverse-polarity protected 9) D = outputs overcurrent and short-circuit protected |