電流開關 CS10-R
Current Relay CS10-R
技術數據
Technical data
CS10-R
電源
power supply
AC220V,AC230V,AC240V,AC110V
AC120V,AC127V,50/60Hz
功耗
Power consumption
<1.2W
接線端子
Terminals
Conductors up to 4mm2
防護等級
Protection class
IP30
環境溫度
Ambient temperature
-25 °C to +45°C
使用壽命
Life span
>100,000h
額定電流
Rated current
2.5A
額定動作點
Rated acting point
More than 1/3 selected load lost
響應時間
Response time
<1s
初使化時間
Initial time
<3s
繼電器觸點
Relay contacts
1NO+1NC
繼電器觸點額定開斷容量
Rated contacts switching capacity
AC-15/250V 6A
絕緣強度
Insulating strength
AC2000V, 50Hz, 1Min
安裝位置
Location mounted
As desire
安裝方式
Mount b
Mount at DIN35 rail
外殼材料
Material of enclosure
Insulating material according to DIN7708
The CS10-R current switch can identify losing of 50W load. The selection switch can be set in 50W,100W,150W,300W load b, if more than 1/3 selected load lost, then the current switch’s alarm lamp bright, and output relay’s 1/2 can close, 3/4 can open. The normal lamp bright when the load is normal, output relay’s 1/2 can open, 3/4can close.
The typical application is to monitor the work status of heat-ing element. When the load lose more than 1/3, the current switch will alarm, the alarm indicator will bright, and the con-tacts of relay will switch.
Application
CS10-R電流開關，能識別50W的負載缺失,也就是在50W、100W、150W、300W的四檔選擇里，如果任何一檔的實際應用負載，缺失1/3以上，則電流開關報警指示燈會發紅光，輸出繼電器觸點1/2會閉合，觸點3/4會斷開。如果工作正常，則工作指示燈發綠光，輸出繼電器觸點1/2會斷開，觸點3/4會閉合。
典型的應用場合為監視加熱元件的工作狀態。當加熱元件開路時，電流開關的告警指示燈會亮起，其輔助接點就會輸出告警信號；當組合式加熱元件中部分缺失，電流開關也會告警。
應用場合
