英國進口MWA鑄鐵焊條Mac Cast E409|ENi-CI
Fully machinable nickel based electrode with specially developed non-conductive coating for welding most cast irons. Specially designed for use where awkward and confined spaces cause arcing difficulties. May be used for hot or cold welding of most types of cast iron.
非導電涂層，完全可加工的鎳基焊條，可用于大多數類型鑄鐵的冷熱焊接。特別設計用于尷尬和受限空間導致電弧焊接困難的地方。
Typical All Weld Metal Chemical Analysis (%)
典型全焊縫金屬成分(%)
|
Mn |
Ni |
|
1.0 |
99.0 |
Typical All Weld Metal Mechanical Properties（As Welded）
典型全焊縫金屬機械性能（焊態）：
Tensile Strength抗拉強度： 400 N/mm2
Elongation延伸率： 15%
Hardness硬度： 180 HB
Sizes Available and Recommended Amperages
尺寸Φ/電流：
|
2.5mm |
3.2mm |
4.0mm |
5.0mm |
|
50-80A |
90-110A |
110-140A |
140-180A |
Current電流：AC/DC (+)
Related Specification參考標準：AWS A5.11 ENi-CI Special Non-Conductive Coating
Storage儲存：Electrodes should be stored in dry conditions. Should the electrodes become damp, re-dry for one hour at 150°C before use. 焊條應儲存在干燥環境中。如果焊條受潮，應在150°C下重新干燥1小時后再使用。
