K-329T

E2209T1-1/4

-

-

K-329T is bulated for MAG welding of 23%Cr-9%Ni-3%Mo duplex stainless principal area of application is chemical plant and shipbuilding as well as nub plant industries.

K-347T

E347T1-1

YF347C

YF347C

K-347T is bulated for MAG welding of 18%Cr-8%Ni-Nb stainless steels.

K-409TiT

EC409

-

-

K-409TiT is developed to meet the needs of the auto-motive exhaust fabricators that desired a bl cored wire. It excels in the pulsed GMAW mode.

K-410T

E410T0-1/-4

YF 410C

YF 410C

K-410T is designed for MAG welding of martensite stainless alloys of the 13%Cr types. It is used for surfacing of sealing faces of valves for gas,water, and steam piping system at service temperatures up to 450∑

K-410NiMoT

E410NiMoT0-4

-

-

K-410NiMoT is designed for MAG welding of soft-martensite stainless alloys of the 13%Cr-4%Ni-Mo types.

K-430T

E430T0-G

YF430G

YF430G

K-430T is designed for MAG welding of ferrite stainless alloys of the 17%Cr-Ti types. It is suitable for automotive exhaust fabricators such as front pipe, bellows, flange,

K-436T

-

-

-

K-436T is designed for MAG welding of stainless steels of the 17%Cr-1% Mo-Ti types. It is suitable for automotive exhaust fabricators such as front pipe, bellows, flange,

K-439T

-

-

-

K-439T is designed for MAG welding of stainless steels of the 18%Cr-1%Ti is suitable for automotive exhaust fabricators such as front pipe, bellows, flange,

K-309LF

E309LT0 -1/-4

YF309LC

YF309LC

K-309LF is designed for MAG welding of low carbon 22%Cr-12%Ni stainless steel. Dissimilar joint welds ; of and between high-strength, mild steels and lowalloyed QT-steels, stainless, ferritic Cr-and austenitic Cr-Ni-steels, manganese steels. Cladding ; for the first layer of corrosion resistant weld claddings _disibledevent='' />