DETER歐境氣體增壓缸泵浦PW15003T
產品編碼 |
倍比 Ratio |
輸出壓力 Outlet Pressure(Ph*) |
吐出量(往返一次) Fluid volume for cycle (L/cycle) |
耗氣量(往返一次) Consumption for cycle (L/cycle) |
PW15002T |
2:1 |
1Pd+Ps |
17.58 |
(3.529xPd+3.645)/1.033 |
PW150003 | 3:1 | 2Pd+Ps | 8.8 | |
PW15003T |
3:1 |
2Pd+Ps |
9.88 |
|
PW150004 | 4:1 | 3Pd+Ps | 4.95 | |
PW15004T |
4:1 |
3Pd+Ps |
6.32 |
|
PW150006 | 6:1 | 5Pd+Ps | 3.17 | |
PW150009 |
9:1 |
8Pd+Ps |
2.20 |
|
PW150014 |
14:1 |
13Pd+Ps |
1.41 |
|
PW150025 |
25:1 |
24Pd+Ps |
0.74 |
* PH= Outlet Pressure / ** PD= Driven Pressure / *** PS = Supply Pressure / Pressure Ratio=PH/PD / signal pressure≥ Pd pressure
附註:設定驅動壓(PD) = 6 kg/cm2, 被壓縮壓(PS) = 6 kg/cm2壓力時,則『每分鐘PH輸出量』及『驅動壓(PD)往返一次耗氣量』所得到的數值如表格內所載明.
Note :If Driven Pressure (PD) is 6 kg/cm2, Supply Pressure (PS) is 6 kg/cm2 pressure, the 『Per minute PH of output』and 『Driven pressure consumption by cycle』the resulting values in the b described.
舉例:當氣體增壓泵浦規格為PW150002T,在PD=6 kg/cm2且 PS=6 kg/cm2的壓力時,則『每分鐘PH輸出量』所得之計算數值為:758 l/min;另外『驅動壓(PD)往返一次耗氣量』所得之計算數值為24.03L