60MAH4H6 F250C F375C 0.81 (20.6) 2.13 (54.0)
60MAH4H9 F250C F562C 1.19 (30.1) 2.56 (65.0)
60MAH5H6 F312C150 F375C 0.81 (20.6) 2.81 (71.4)
60MAH6H6 F375C F375C 0.81 (20.6) 2.25 (57.1)
60MAH6H9 F375C F562C 1.19 (30.1) 2.88 (73.0)
60MAH9H9 F562C F562C 1.19 (30.1) 3.00 (76.2)
150MAH5H5 F312C150 F312C150 0.75 (19.1) 3.38 (85.7)
Catalog
Number
Connection
L/P
Connection
NPT A Hex
Connection
M/P
Catalog
Number
15MAM4P4 SF250CX 1/4” 0.63 (15.9) 1.75 (44.5)
15MAM4P6 SF250CX 3/8” 0.75 (19.1) 1.81 (46.2)
15MAM4P8 SF250CX 1/2” 0.94 (23.8) 2.19 (55.5)
15MAM6P4 SF375CX 1/4” 0.63 (15.9) 1.94 (49.1)
15MAM6P6 SF375CX 3/8” 0.75 (19.1) 2.00 (50.8)
15MAM6P8 SF375CX 1/2” 0.94 (23.8) 2.38 (60.3)
15MAM9P4 SF562CX 1/4” 0.81 (20.6) 2.25 (57.1)
15MAM9P6 SF562CX 3/8” 0.81 (20.6) 2.13 (54.0)
15MAM9P8 SF562CX 1/2” 0.94 (23.8) 2.56 (65.0)
10MAM9P12 SF562CX 3/4” 1.19 (30.1) 2.75 (69.9)
10MAM9P16 SF562CX 1” 1.38 (34.9) 3.00 (76.2)
15MAM12P4 SF750CX 1/4” 1.19 (30.1) 2.63 (66.7)
15MAM12P6 SF750CX 3/8” 1.19 (30.1) 2.63 (66.7)
15MAM12P8 SF750CX 1/2” 1.19 (30.1) 2.81 (71.4)
10MAM12P12 SF750CX 3/4” 1.19 (30.1) 2.81 (71.4)
10MAM12P16 SF750CX 1” 1.19 (30.1) 2.81 (71.4)
15MAM16P4 SF1000CX 1/4” 1.38 (34.9) 3.38 (85.7)
15MAM16P6 SF1000CX 3/8” 1.38 (34.9) 3.31 (84.1)
15MAM16P8 SF1000CX 1/2” 1.38 (34.9) 3.44 (87.3)
10MAM16P12 SF1000CX 3/4” 1.50 (38.1) 3.75 (95.3)
10MAM16P16 SF1000CX 1” 1.50 (38.1) 4.00 (101.6)
15MAL2P2 W125 1/8” 0.50 (12.7) 1.38 (34.9)
15MAL2P4 W125 1/4” 0.63 (15.9) 1.63 (41.2)
15MAL2P8 W125 1/2” 1.00 (25.4) 2.13 (54.0)
15MAL4P8 SW250 1/2” 1.00 (25.4) 2.25 (57.1)
15MAL4P2 SW250 1/8” 0.63 (15.9) 1.63 (41.2)
15MAL4P4 SW250 1/4” 0.63 (15.9) 1.75 (44.5)
15MAL6P4 SW375 1/4” 0.75 (19.1) 1.88 (47.6)
15MAL6P8 SW375 1/2” 1.00 (25.4) 2.25 (57.1)
10MAL8P6 SW500 3/8” 1.00 (25.4) 2.00 (50.0)
10MAL8P8 SW500 1/2” 1.00 (25.4) 2.31 (58.7)
10MAL8P12 SW500 3/4” 1.19 (30.1) 2.38 (60.3)
A
B
Connection
H/P
Catalog
Number
Connection
NPT
Dimension inches (mm)
A Hex B
High-Pressure to NPT Adapters
Connection
M/P
Catalog
Number
Connection
RH
Dimension inches (mm)
A Hex B
Medium-Pressure to Reverse High-Pressure Adapters
Connection
NPT
Catalog
Number
Connection
NPT
Dimension inches (mm)
A Hex B
NPT to NPT Adapters
18 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
A
B
A
B
Maximum pressure rating is based on the lowest rating of any component.
Actual working pressure may be determined by tubing pressure rating, if lower.
Note: For pressure rating see ordering procedure.
All Dimensions for reference only and are subject to change.
For b service, Autoclave stocks select products. Consult factory.
15MAH4P4 F250C 1/4” 0.63 (15.9) 1.81 (46.2)
15MAH4P6 F250C 3/8” 0.75 (19.1) 1.88 (47.6)
15MAH4P8 F250C 1/2” 0.94 (23.8) 2.25 (57.1)
15MAH6P4 F375C 1/4” 0.81 (20.6) 2.13 (54.0)
15MAH6P6 F375C 3/8” 0.81 (20.6) 2.13 (54.0)
15MAH6P8 F375C 1/2” 0.94 (23.8) 2.50 (63.5)
15MAH9P4 F562C 1/4” 1.19 (30.1) 2.63 (66.7)
15MAH9P6 F562C 3/8” 1.19 (30.1) 2.56 (65.0)
15MAH9P8 F562C 1/2” 1.19 (30.1) 2.75 (69.9)
15MAP4P4 1/4 1/4” 0.63 (15.9) 1.81 (46.2)
15MAP4P6 1/4 3/8” 0.75 (19.1) 1.88 (47.6)
15MAP4P8 1/4 1/2” 0.94 (23.8) 2.31 (58.7)
15MAP6P6 3/8 3/8” 0.75 (19.1) 1.88 (47.6)
15MAP6P8 3/8 1/2” 0.94 (23.8) 2.31 (58.7)
15MAP8P8 1/2 1/2” 0.94 (23.8) 2.50 (63.5)
20MAM4RH9 SF250CX 9/16” 0.63 (15.9) 1.56 (39.7)
20MAM4RH12 SF250CX 3/4” 0.81 (20.6) 1.88 (47.6)
20MAM4RH16 SF250CX 1” 1.00 (25.4) 2.13 (54.0)
20MAM6RH9 SF375CX 9/16” 0.63 (15.9) 1.69 (42.8)
20MAM6RH12 SF375CX 3/4” 0.81 (20.6) 1.81 (46.2)
20MAM6RH16 SF375CX 1” 1.00 (25.4) 2.25 (57.1)
20MAM9RH9 SF562CX 9/16” 0.94 (23.8) 2.00 (50.8)
20MAM9RH12 SF562CX 3/4” 0.94 (23.8) 2.13 (54.0)
20MAM9RH14 SF562CX 7/8” 0.94 (23.8) 2.44 (61.9)
20MAM9RH16 SF562CX 1” 1.00 (25.4) 2.25 (57.1)
20MAM9RH21 SF562CX 1-5/16” 1.38 (34.9) 2.38 (60.3)
20MAM12RH9 SF750CX 9/16” 1.19 (30.1) 2.38 (60.3)
20MAM12RH12 SF750CX 3/4” 1.19 (30.1) 2.44 (61.9)
20MAM12RH16 SF750CX 1” 1.19 (30.1) 2.50 (63.5)
20MAM12RH21 SF750CX 1-5/16” 1.50 (38.1) 2.75 (69.9)
20MAM16RH9 SF1000CX 9/16” 1.38 (34.9) 3.13 (79.3)
20MAM16RH12 SF1000CX 3/4” 1.38 (34.9) 3.19 (80.9)
20MAM16RH14 SF1000CX 7/8” 1.38 (34.9) 3.34 (84.9)
20MAM16RH16 SF1000CX 1” 1.38 (34.9) 3.38 (85.7)
20MAM16RH21 SF1000CX 1-5/16” 1.50 (38.1) 3.25 (82.6)
NOTE: NPT (Pipe) connections
? NPT threads must be sealed using a high quality PTFE tape and/or
PTFE paste product. Refer to thread sealant manufacturer’s instructions
on how to apply thread sealant.
? Sealing perbance may vary based on many factors such as pressure,
temperature, media, thread quality, thread material, proper thread
engagement and proper use of thread sealant.
? Customer should limit the number of times an NPT fitting is assembled
and disassembled because thread debation during assembly will
result in deteriorating seal quality over time. When using only PTFE tape,
consider using thread lubrication to prevent galling of mating parts.
Connection
H/P
Catalog
Number
Connection
RH
Dimension inches (mm)
A Hex B
26MAH4RH16 F250C 1” 1.00 (25.4) 2.13 (54.0)
26MAH6RH16 F375C 1” 1.00 (25.4) 2.25 (57.1)
26MAH9RH16 F562C 1” 1.19 (30.1) 2.69 (68.2)
30MAH4RH12 F250C 3/4” 0.81 (20.6) 1.88 (47.6)
30MAH6RH12 F375C 3/4” 0.81 (20.6) 2.06 (54.0)
30MAH9RH12 F562C 3/4” 1.19 (30.1) 2.50 (63.5)
40MAH4RH9 F250C 9/16” 0.63 (15.9) 1.56 (39.7)
40MAH6RH9 F375C 9/16” 0.81 (20.6) 1.94 (49.1)
40MAH9RH9 F562C 9/16” 1.19 (30.1) 2.38 (60.3)
High-Pressure to Reverse High-Pressure Adapters
Connection
NPT
Catalog
Number
Connection
RH
Dimension inches (mm)
A Hex B
NPT to Reverse High-Pressure Adapters
Connection
RH
Catalog
Number
Connection
RH
Dimension inches (mm)
A Hex B
Reverse High-Pressure to Reverse High-Pressure Adapters
All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 19
B
A
A
B
A
B
Maximum pressure rating is based on the lowest rating of any component.
Actual working pressure may be determined by tubing pressure rating, if lower.
Note: For pressure rating see ordering procedure.
All Dimensions for reference only and are subject to change.
For b service, Autoclave stocks select products. Consult factory.
15MAP4RH9 1/4 9/16” 0.63 (15.9) 1.63 (41.2)
15MAP4RH12 1/4 3/4” 0.81 (20.6) 1.88 (47.6)
15MAP4RH16 1/4 1” 1.00 (25.4) 2.25 (57.1)
15MAP6RH9 3/8 9/16” 0.75 (19.1) 1.81 (46.2)
15MAP6RH12 3/8 3/4” 0.81 (20.6) 1.94 (49.1)
15MAP6RH16 3/8 1” 1.00 (25.4) 2.13 (54.0)
15MAP8RH9 1/2 9/16” 0.94 (23.8) 2.00 (50.8)
15MAP8RH12 1/2 3/4” 0.94 (23.8) 2.13 (54.0)
15MAP8RH14 1/2 7/8” 1.00 (25.4) 2.25 (57.1)
15MAP8RH16 1/2 1” 1.00 (25.4) 2.31 (58.7)
10MAP12RH12 3/4 3/4” 1.19 (30.1) 2.31 (58.7)
10MAP12RH16 3/4 1” 1.38 (34.9) 2.63 (66.7)
10MAP12RH21 3/4 1-5/16” 1.38 (34.9) 2.63 (66.7)
10MAP16RH9 1 9/16” 1.38 (34.9) 2.25 (57.2)
10MAP16RH16 1 1” 1.38 (34.9) 2.81 (71.4)
10MAP16RH21 1 1-5/16” 1.38 (34.9) 2.68 (68.0)
20MARH21RH21 1-5/16 1-5/16” 1.38 (34.9) 2.13 (54.1)
26MARH9RH16 9/16 1” 1.00 (25.4) 1.88 (47.6)
26MARH12RH16 3/4 1” 1.00 (25.4) 2.00 (50.8)
26MARH16RH16 1 1” 1.00 (25.4) 2.00 (50.8)
30MARH9RH12 9/16 3/4” 0.81 (20.6) 1.63 (41.2)
30MARH12RH12 3/4 3/4” 0.81 (20.6) 1.75 (44.5)
40MARH9RH9 9/16 9/16” 0.63 (15.9) 1.50 (38.1)
QSS Male/Female Adapters
Male /female adapters are designed to adapt a female connection
to another size and/or type of connection without the need
for additional couplings. In selecting an adapter involving two
different sized connections, the larger connection should be
on the male end where it is possible to maximize the mechanical
strength of the adapter.
To use this chart:
1. Locate MALE end in vertical column.
2. Locate desired FEMALE end of adapter across top of chart.
3. Catalog number of required adapter is located at
intersection of columns.
4. For one piece adapter add-OP to suffix of part number.
Connection
Size and Type
Quick Set
Medium Pressure Quick Set
Note:
All AE adapters are supplied complete with appropriate gland nuts and sleeves unless specified without.
Materials
All Autoclave adapters are precision machined from coldworked
Type 316 stainless steel.
1/4” 3/8” 9/16” 3/4” 1/4” 3/8” 9/16” 3/4” 1”
QS250 QS375 QS562 QS750 SF250CX SF375CX SF562CX SF750CX SF1000CX
Fits this Pressure 15,000 15,000 15,000 15,000 20,000 20,000 20,000 20,000 20,000
Female Rating (1034.20) (1034.20) (1034.20) (1034.20) (1378.93) (1378.93) (1378.93) (1378.93) (1378.93)
Connection PSI (bar)*
1/4” QS250 15M46QQ 15M49QQ 15M412QQ 15M44Q6 15M46Q6 15M49Q6 15M412Q6 15M416Q6
3/8” QS375 15M64QQ 15M69QQ 15M612QQ 15M64Q6 15M66Q6 15M69Q6 15M612Q6 15M616Q6
9/16” QS562 15M94QQ 15M94QQ 15M912QQ 15M94Q6 15M96Q6 15M99Q6 15M912Q6 15M916Q6
3/4” QS750 15M124QQ 15M126QQ 15M129QQ 15M124Q6 15M126Q6 15M129Q6 15M1212Q6 15M1216Q6
1/4” SF250CX 15M44KQ 15M46KQ 15M49KQ 15M412KQ
3/8” SF375CX 15M64KQ 15M66KQ 15M69KQ 15M612KQ
9/16” SF562CX 15M94KQ 15M96KQ 15M99KQ 15M912KQ
3/4” SF750CX 15M124KQ 15M126KQ 15M129KQ 15M1212KQ
1” SF1000CX 15M164KQ 15M166KQ 15M169KQ 15M1612KQ
1/4” F250C 15M44BQ 15M46BQ 15M49BQ 15M412BQ
3/8” F375C 15M64BQ 15M66BQ 15M69BQ 15M612BQ
9/16” F562C 15M94BQ 15M96BQ 15M99BQ 15M912BQ
1/4” NPT 15M44NQ 15M46NQ 15M49NQ 15M412NQ
3/8” NPT 15M64NQ 15M66NQ 15M69NQ 15M612NQ
1/2” NPT 15M84NQ 15M86NQ 15M89NQ 15M812NQ
3/4” NPT 10M124NQ 10M126NQ 10M129NQ 10M1212NQ
1” NPT 10M164NQ 10M166NQ 10M169NQ 10M1612NQ
Medium Pressure
National Pipe Thread (NPT) High Pressure
* The maximum pressure rating for an adapter is determined by the connection component with the
LOWEST pressure rating; that is, the two end connections and the tubing or pipe used, whichever is
LOWER.
CAUTION: See appropriate pressure section in reference to proper selection of tubing.
15,000
(1034.20)
15,000
(1034.20)
15,000
(1034.20)
15,000
(1034.20)
20,000
(1378.93)
20,000
(1378.93)
20,000
(1378.93)
20,000
(1378.93)
20,000
(1378.93)
60,000
(4136.85)
60,000
(4136.85)
60,000
(4136.85)
15,000
(1034.20)
15,000
(1034.20)
15,000
(689.45)
10,000
(689.45)
10,000
(689.45)
FEMALE END
MALE END
NOTE: NPT (Pipe) connections
? NPT threads must be sealed using a high quality PTFE tape and/or
PTFE paste product. Refer to thread sealant manufacturer’s instructions
on how to apply thread sealant.
? Sealing perbance may vary based on many factors such as pressure,
temperature, media, thread quality, thread material, proper thread
engagement and proper use of thread sealant.
? Customer should limit the number of times an NPT fitting is assembled
and disassembled because thread debation during assembly will
result in deteriorating seal quality over time. When using only PTFE
tape, consider using thread lubrication to prevent galling of mating parts.
20
High Pressure
1/4” 3/8” 9/16” 1/4” 3/8” 1/2” 3/4” 1”
F250C F375C F562C NPT NPT NPT NPT NPT
60,000 60,000 150,000 15,000 15,000 15,000 10,000 10,000
(4136.85) (4136.85) (10342.14) (1034.20) (1034.20) (1034.20) (689.45) (689.45)
15M44Q3 15M46Q3 15M49Q3 15M44Q8 15M46Q8 15M48Q8 10M412Q8 10M416Q8
15M64Q3 15M66Q3 15M69Q3 15M64Q8 15M66Q8 15M68Q8 10M612Q8 10M616Q8
15M94Q3 15M96Q3 15M99Q3 15M94Q8 15M96Q8 15M98Q8 10M912Q8 10M916Q8
15M124Q3 15M126Q3 15M129Q3 15M124Q8 15M126Q8 15M128Q8 10M1212Q8 10M1216Q8
National Pipe Thread (NPT)
AE Male/Female Adapters are available in a “one-piece” design. They are identical to the two piece designs in
length and can be ordered by adding the suffix - OP to the two piece adapter part numbers listed.
For b service, Autoclave stocks select products. Consult factory.
FEMALE END
Quick Set Female
to
Quick Set Male
Quick Set Female
to
Medium Pressure Male
Quick Set Female
to
High Pressure Male
Quick Set Female
to
National Pipe Male
21
QS Series
Female
End
Male End
Fits this
Connection
Catalog
Number
Dimension inches (mm)
A Hex B
Female
End
Catalog
Number
Dimension inches (mm)
A Hex B
For b service, Autoclave stocks select products. Consult factory. Maximum pressure rating is based on the lowest rating of any component.
Actual working pressure may be determined by tubing pressure rating, if lower.
Note: For pressure rating see selection chart.
All Dimensions for reference only and subject to change.
Male End
Fits this
Connection
A
HEX
B
A
HEX
B
QSS to Pipe QSS to QSS
QS250 QS250
QS250 QS375 15M46QQ
QS250 QS562 15M49QQ 1.38 (34.9) 2.25 (57.1)
QS250 QS750 15M412QQ
QS250 SF250CX 15M44Q6
QS250 SF375CX 15M46Q6
QS250 SF562CX 15M49Q6
QS250 SF750CX 15M412Q6
QS250 SF1000CX 15M416Q6
QS250 F250C 15M44Q3
QS250 F375C 15M46Q3
QS250 F562C 10M49Q3
QS250 1/4 NPT 15M44Q8 .75 (19.1) 1.69 (42.9)
QS250 3/8 NPT 15M46Q8
QS250 1/2 NPT 15M48Q8
QS250 3/4 NPT 10M412Q8
QS250 1 NPT 10M416Q8
QS375 QS250 15M64QQ .75 (19.1) 1.53 (38.9)
QS375 QS375
QS375 QS562 15M69QQ
QS375 QS750 15M612QQ 1.50 (38.1) 2.78 (70.6)
QS375 SF250CX 15M64Q6
QS375 SF375CX 15M66Q6 0.75 (19.1) 1.66 (42.2)
QS375 SF562CX 15M69Q6 1.00 (25.4) 1.78 (45.2)
QS375 SF750CX 15M612Q6
QS375 SF1000CX 15M616Q6
QS375 F250C 15M64Q3
QS375 F375C 15M66Q3
QS375 F562C 15M69Q3
QS375 1/4 NPT 15M64Q8 .75 (19.1) 1.66 (42.2)
QS375 3/8 NPT 15M66Q8 1.00 (25.4) 1.78 (45.3)
QS375 1/2 NPT 15M68Q8 1.19 (30.1) 2.16 (54.8)
QS375 3/4 NPT 10M612Q8
QS375 1 NPT 10M616Q8
QS562 QS250 15M94QQ 1.00 (25.4) 1.85 (46.8)
QS562 QS375 15M96QQ 1.00 (25.4) 1.85 (46.8)
QS562 QS562
QS562 QS750 15M912QQ 1.50 (38.1) 3.16 (80.3)
QS562 SF250CX 15M94Q6
QS562 SF375CX 15M96Q6
QS562 SF562CX 15M99Q6
QS562 SF750CX 15M912Q6
QS562 SF1000CX 15M916Q6
QS562 F250C 15M94Q3
QS562 F375C 15M96Q3
QS562 F562C 15M99Q3
QS562 1/4 NPT 15M94Q8 1.19 (30.1) 2.22 (56.4)
QS562 3/8 NPT 15M96Q8 1.19 (30.1) 2.22 (56.4)
QS562 1/2 NPT 15M98Q8 1.19 (30.1) 2.41 (61.1)
QS562 3/4 NPT 10M912Q8
QS562 1 NPT 10M916Q8
QS750 QS250 15M124QQ
QS750 QS375 15M126QQ 1.50 (38.1) 2.53 (64.1)
QS750 QS562 15M129QQ 1.50 (38.1) 2.53 (64.1)
QS750 QS750
QS750 SF250CX 15M124Q6
QS750 SF375CX 15M126Q6
QS750 SF562CX 15M129Q6
QS750 SF750CX 15M1212Q6
QS750 SF1000CX 15M1216Q6
QS750 F250C 15M124Q3
QS750 F375C 15M126Q3
QS750 F562C 15M129Q3
QS750 1/4 NPT 15M124Q8
QS750 3/8 NPT 15M126Q8
QS750 1/2 NPT 15M128Q8 1.50 (38.1) 2.78 (70.5)
QS750 3/4 NPT 10M1212Q8
QS750 1 NPT 10M1216Q8
22
SF562CX QS250 15M94KQ .94 (23.8) 1.75 (44.5)
SF562CX QS375 15M96KQ .94 (23.8) 1.75 (44.5)
SF562CX QS562 15M99KQ 1.38 (34.9) 2.50 (63.5)
SF562CX QS750 15M912KQ 1.50 (38.1) 3.25 (82.6)
SF750CX QS250 15M124KQ
SF750CX QS375 15M126KQ
SF750CX QS562 15M129KQ
SF750CX QS750 15M1212KQ 1.50 (38.1) 3.06 (77.7)
SF1000CX QS250 15M164KQ
SF1000CX QS375 15M166KQ
SF1000CX QS562 15M169KQ 1.50 (38.1) 2.88 (73.0)
SF1000CX QS750 15M1612KQ 1.50 (38.1) 3.38 (85.7)
Maximum pressure rating is based on the lowest rating of any component.
Actual working pressure may be determined by tubing pressure rating, if lower.
Note: For pressure rating see selection chart.
All Dimensions for reference only and subject to change.
Adapter configurations may vary from outline shown.
For b service, Autoclave stocks select products. Consult factory.
F375C QS250 15M64BQ
F375C QS375 15M66BQ 0.81 (20.6) 1.69 (42.9)
F375C QS562 15M69BQ
F375C QS750 15M612BQ
F562C QS250 15M94BQ 1.19 (30.1) 1.81(46.1)
F562C QS375 15M96BQ 1.19 (30.1) 1.69 (42.9)
F562C QS562 15M99BQ 1.38 (34.9) 2.32 (58.8)
F562C QS750 15M912BQ 1.50 (38.1) 3.06 (77.7)
SF250CX QS250 15M44KQ
SF250CX QS375 15M46KQ
SF250CX QS562 15M49KQ 1.38 (34.9) 2.13 (54.10)
SF250CX QS750 15M412KQ
SF375CX QS250 15M64KQ 0.75 (19.1) 1.63 (41.4)
SF375CX QS375 15M66KQ .081 (20.6) 1.81 (46.1)
SF375CX QS562 15M69KQ
SF375CX QS750 15M612KQ 1.50 (38.1) 3.00 (76.20)
F250C QS250 15M44BQ .75 (19.1) 1.31 (33.3)
F250C QS375 15M46BQ .81 (20.6) 1.56 (39.7)
F250C QS562 15M49BQ
F250C QS750 15M412BQ
B
A
HEX
MP to QSS HP to QSS
B
A
HEX
QS Series
Female
End
Male End
Fits this
Connection
Catalog
Number
Dimension inches (mm)
A Hex B
Female
End
Catalog
Number
Dimension inches (mm)
A Hex B
Male End
Fits this
Connection
23
3/4 NPT QS250 10M124NQ
3/4 NPT QS375 10M126NQ
3/4 NPT QS562 10M129NQ 1.38 (35.1) 2.38 (60.3)
3/4 NPT QS750 10M1212NQ 1.50 (38.1) 2.81 (71.4)
1 NPT QS250 10M164NQ
1 NPT QS275 10M166NQ
1 NPT QS562 10M169NQ 1.50 (38.1) 2.38 (60.3)
1 NPT QS750 10M1612NQ 1.50 (38.1) 2.38 (60.3)
Maximum pressure rating is based on the lowest rating of any component.
Actual working pressure may be determined by tubing pressure rating, if lower.
Note: For pressure rating see selection chart.
All Dimensions for reference only and subject to change.
Adapter configurations may vary from outline shown.
For b service, Autoclave stocks select products.
Consult factory.
B
A
HEX
NPT to QSS
QS Series
Female
End
Male End
Fits this
Connection
Catalog
Number
Dimension inches (mm)
A Hex B
24
1/4 NPT QS250 15M44NQ 0.75 (19.1) 1.44 (36.5)
1/4 NPT QS375 15M46NQ 0.81 (20.6) 1.63 (41.3)
1/4 NPT QS562 15M49NQ
1/4 NPT QS750 15M412NQ
3/8 NPT QS250 15M64NQ 0.75 (19.1) 1.50 (38.1)
3/8 NPT QS375 15M66NQ 0.81 (20.6) 1.63 (41.3)
3/8 NPT QS562 15M69NQ 1.38 (35.1) 2.13 (53.5)
3/8 NPT QS750 15M612NQ
1/2 NPT QS250 15M84NQ 0.94 (23.8) 1.75 (44.5)
1/2 NPT QS375 15M86NQ 0.94 (23.8) 1.63 (41.3)
1/2 NPT QS562 15M89NQ 1.38 (35.1) 2.25 (57.2)
1/2 NPT QS750 15M812NQ 1.50 (38.1) 2.81 (71.4)
QSS Male/Male Adapters
Autoclave Engineer’s standard male-to-male one piece adapters are
available in multiple configurations. Standard male-to-male adapters are
machined from cold worked stainless steel.Contact your local Sales
Representative for optional inbation. The following tables list our
standard adapters with dimensions.
Adapter End Configuration
QS Series ‘H’ High Pressure ‘RH’ Reverse High
Pressure
‘M’ Medium Pressure
Ordering Procedure
Typical catalog number: 15 MA Q4 H9
15
Pressure
(X 1000 psi)
MA
Male
Adapter
Q4
M4 - 1/4” Medium Pressure
M6 - 3/8” Medium Pressure
M9 - 9/16” Medium Pressure
M12 - 3/4” Medium Pressure
M16 - 1” Medium Pressure
H9
P4 - 1/4” NPT
P6 - 3/8” NPT
P8 - 1/2” NPT
P12 - 3/4” NPT
P16 - 1” NPT
Available End Connections
Q4 - 1/4” QS Series
Q6 - 3/8” QS Series
Q9 - 9/16” QS Series
Q12 - 3/4” QS Series
‘P’ National Pipe Tapered
H4 - 1/4” High Pressure
H5 - 5/16” High Pressure
H6 - 3/8” High Pressure
H9 - 9/16” High Pressure
* RH9 - 9/16” -18 Reverse High
RH12 - 3/4” -16 Reverse High
RH14 - 7/8” -14 Reverse High
RH16 - 1” -12 Reverse High
RH21 - 1-5/16” -12 Reverse High
*RH9 & RH14 - 40,000 psi (2758 bar), RH12 - 30,000 psi (2068 bar), RH16 - 26,000 psi (1793 bar), RH21 - 20,000 psi (1379 bar).
25
Catalog
Number
Connection
RH
Dimension inches (mm)
A Hex B
QS Series to Reverse High-Pressure Adapters
Connection
QS
15MAQ4RH9 QS250 9/16” 0.63 (15.9) 1.70 (43.2)
15MAQ6RH9 QS375 9/16” .75 (19.1) 1.81 (46.2)
15MAQ9RH9 QS562 9/16” 1.19 (30.1) 2.25 (57.1)
15MAQ9RH12 QS562 3/4” 1.19 (30.1) 2.38 (60.3)
15MAQ9RH16 QS562 1” 1.19 (30.1) 2.56 (65.1)
A
B
Catalog
Number
Dimension inches (mm)
A Hex B
Connection
QS
15MAQ9H4 QS562 1/4” 0.75 (19.1) 2.00 (50.8)
A
B
QS Series to High-Pressure Adapter
Connection
H/P
Catalog
Number
Dimension inches (mm)
A Hex B
Connection
QS
15MAQ6P4 QS375 1/4” 1.19 (30.1) 2.44 (62.0)
QS Series to NPT Adapter
Connection
NPT
A
B
26
Adapters/Couplings - Male/Male JIC Adapters
Autoclave Engineer’s male-to-male JIC one-piece adapters are available
in low, medium, and high pressure configurations. JIC adapters
are machined from cold worked stainless steel. Other materials are
available upon request. Contact your local Sales Representative for
optional inbation. The following tables list our standard adapters
with dimensions.
Adapter End Configuration
JIC connections consist of a 37° angle.
Ordering Procedure
Typical catalog number: 20 MA M4 J4
20
Pressure
(X 1000 psi)
MA M4 J4
Available End Connections
L4 - 1/4” Low Pressure
L6 - 3/8” Low Pressure
L8 - 1/2” Low Pressure
M4 - 1/4” Medium Pressure
M6 - 3/8” Medium Pressure
M9 - 9/16” Medium Pressure
M12 - 3/4” Medium Pressure
M16 - 1” Medium Pressure
H4 - 1/4” High Pressure
H6 - 3/8” High Pressure
H9 - 9/16” High Pressure
P4 - 1/4” NPT
P6 - 3/8” NPT
P8 - 1/2” NPT
37°
All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 27
Male
Adapter
Note: Special material one piece adapters may be supplied with four flats in place of standard hex.
*J4 - 1/4” JIC
J6 - 3/8” JIC
J8 - 1/2” JIC
J10 - 5/8” JIC
J12 - 3/4” JIC
J16 - 1” JIC
*J4, J6, J8 & J10 - 20,000 psi (1380 bar), J12 & J16 - 15,000 psi (1034 bar)
Thread Sizes
J4 - 7/16-20
J6 - 9/16-18
J8 - 3/4-16
J10 - 7/8-14
J12 - 11/16-12
J16 - 15/16-12
Connection
L/P
Catalog
Number
Connection
JIC
Dimension inches (mm)
A Hex B
Low-Pressure to JIC Adapters
Connection
M/P
Catalog
Number
Connection
JIC
Dimension inches (mm)
A Hex B
Medium-Pressure to JIC Adapters
Connection
H/P
Catalog
Number
Connection
JIC
Dimension inches (mm)
A Hex B
High-Pressure to JIC Adapters
28 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
A
B
B
A
A
B
Maximum pressure rating is based on the lowest rating of any component.
Actual working pressure may be determined by tubing pressure rating, if lower.
Note: For pressure rating see ordering procedure.
All Dimensions for reference only and are subject to change.
For b service, Autoclave stocks select products. Consult factory.
20MAH4J2 F250C 1/8” 0.63 (15.9) 1.50 (38.1)
20MAH4J4 F250C 1/4” 0.75 (19.1) 1.63 (41.3)
20MAH4J6 F250C 3/8” 0.81 (20.6) 1.63 (41.3)
20MAH4J8 F250C 1/2” 1.00 (25.4) 1.88 (47.6)
20MAH6J4 F375C 1/4” 0.81 (20.6) 1.94 (49.1)
20MAH6J6 F375C 3/8” 0.81 (20.6) 1.94 (49.1)
20MAH6J8 F375C 1/2” 1.00 (25.4) 2.19 (55.5)
20MAH9J4 F562C 1/4” 1.19 (30.1) 2.31 (58.7)
20MAH9J6 F562C 3/8” 1.19 (30.1) 2.31 (58.7)
20MAH9J8 F562C 1/2” 1.19 (30.1) 2.38 (60.3)
20MAH4J10 F250C 5/8” 1.19 (30.1) 2.13 (54.0)
15MAL4J4 SW250 1/4” 0.75 (19.1) 1.88 (47.6)
15MAL6J6 SW375 3/8” 0.81 (20.6) 2.00 (50.8)
15MAM4J12 SF250CX 3/4” 1.38 (34.9) 2.25 (57.1)
15MAM4J16 SF250CX 1” 1.50 (38.1) 2.38 (60.3)
15MAM6J12 SF375CX 3/4” 1.38 (34.9) 2.44 (61.3)
15MAM6J16 SF375CX 1” 1.50 (38.1) 2.53 (64.9)
15MAM9J12 SF562CX 3/4” 1.38 (34.9) 2.69 (68.2)
15MAM9J16 SF562CX 1” 1.50 (38.1) 2.78 (70.6)
15MAM12J12 SF750CX 3/4” 1.38 (34.9) 2.88 (73.0)
15MAM12J16 SF750CX 1” 1.50 (38.1) 2.88 (73.0)
15MAM16J12 SF1000CX 3/4” 1.38 (34.9) 3.38 (85.7)
15MAM16J16 SF1000CX 1” 1.50 (38.1) 3.50 (89.0)
20MAM4J4 SF250CX 1/4” 0.75 (19.1) 1.63 (41.3)
20MAM4J6 SF250CX 3/8” 0.81 (20.6) 1.75 (44.5)
20MAM4J8 SF250CX 1/2” 1.00 (25.4) 2.00 (50.8)
20MAM6J4 SF375CX 1/4” 0.75 (19.1) 1.75 (44.5)
20MAM6J6 SF375CX 3/8” 0.81 (20.6) 1.81 (46.0)
20MAM6J8 SF375CX 1/2” 1.00 (25.4) 2.00 (50.8)
20MAM9J4 SF562CX 1/4” 0.94 (23.8) 2.13 (54.0)
20MAM9J6 SF562CX 3/8” 0.94 (23.8) 2.13 (54.0)
20MAM9J8 SF562CX 1/2” 1.00 (25.4) 2.25 (57.1)
20MAM9J10 SF562CX 5/8” 1.19 (30.1) 2.25 (57.1)
20MAM12J4 SF750CX 1/4” 1.19 (30.1) 2.38 (60.3)
20MAM12J6 SF750CX 3/8” 1.19 (30.1) 2.38 (60.3)
20MAM12J8 SF750CX 1/2” 1.19 (30.1) 2.50 (63.5)
20MAM16J4 SF1000CX 1/4” 1.38 (34.9) 3.13 (79.3)
20MAM16J6 SF1000CX 3/8” 1.38 (34.9) 3.13 (79.3)
20MAM16J8 SF1000CX 1/2” 1.38 (34.9) 3.13 (79.3)
Connection
JIC
Catalog
Number
Connection
JIC A Hex B
JIC to JIC Adapters
Connection
NPT
Catalog
Number
Connection
JIC
Dimension inches (mm)
A Hex B
NPT to JIC Adapters
All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 29
B
A
B
A
Maximum pressure rating is based on the lowest rating of any component.
Actual working pressure may be determined by tubing pressure rating, if lower.
Note: For pressure rating see ordering procedure.
All Dimensions for reference only and are subject to change.
For b service, Autoclave stocks select products. Consult factory.
15MAP4J4 1/4 1/4” 0.75 (19.1) 1.69 (42.8)
15MAP4J6 1/4 3/8” 0.81 (20.6) 1.75 (44.5)
15MAP4J8 1/4 1/2” 1.00 (25.4) 1.94 (49.1)
15MAP4J12 1/4 3/4” 1.38 (34.9) 2.25 (57.1)
15MAP6J4 3/8 1/4” 0.75 (19.1) 1.69 (42.8)
15MAP6J6 3/8 3/8” 0.81 (20.6) 1.75 (44.5)
15MAP6J8 3/8 1/2” 1.00 (25.4) 1.81 (46.0)
15MAP6J12 3/8 3/4” 1.38 (34.9) 2.25 (57.1)
15MAP8J4 1/2 1/4” 0.94 (23.8) 2.00 (50.8)
15MAP8J8 1/2 1/2” 1.00 (25.4) 2.13 (54.0)
15MAP8J12 1/2 3/4” 1.38 (34.9) 2.44 (61.9)
Dimension inches (mm)
NOTE: NPT (Pipe) connections
? NPT threads must be sealed using a high quality PTFE tape and/or
PTFE paste product. Refer to thread sealant manufacturer’s instructions
on how to apply thread sealant.
? Sealing perbance may vary based on many factors such as pressure,
temperature, media, thread quality, thread material, proper thread
engagement and proper use of thread sealant.
? Customer should limit the number of times an NPT fitting is assembled
and disassembled because thread debation during assembly will
result in deteriorating seal quality over time. When using only PTFE tape,
consider using thread lubrication to prevent galling of mating parts.
20MAJ4J4 1/4 1/4” 0.71 (19.1) 1.56 (39.7)
20MAJ6J6 3/8 3/8” 0.81 (20.6) 1.56 (39.7)
20MAJ6J8 3/8 1/2” 1.00 (25.4) 1.75 (44.5)
20MAJ8J8 1/2 1/2” 1.00 (25.4) 1.81 (46.0)
30 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Connection
Size and Type
JIC
Medium Pressure JIC
Medium Pressure
National Pipe Thread (NPT) High Pressure
20,000
(1378.93)
20,000
(1378.93)
20,000
(1378.93)
20,000
(1378.93)
15,000
(1034.20)
15,000
(1034.20)
20,000
(1378.93)
20,000
(1378.93)
20,000
(1378.93)
20,000
(1378.93)
20,000
(1378.93)
FEMALE END
MALE END
60,000
(4136.85)
60,000
(4136.85)
60,000
(4136.85)
10,000
(689.45)
10,000
(689.45)
Adapters/Couplings - Male/Female JIC Adapters
Male /female adapters are designed to adapt a female connection
to another size and/or type of connection without the need
for additional couplings. In selecting an adapter involving two
different sized connections, the larger connection should be
on the male end where it is possible to maximize the mechanical
strength of the adapter.
To use this chart:
1. Locate MALE end in vertical column.
2. Locate desired FEMALE end of adapter across top of chart.
3. Catalog number of required adapter is located at
intersection of columns.
4. For one piece adapter add-OP to suffix of part number
where applicable.
Other Adapters
Autoclave supplies many other types of adapters on special
order. These include Autoclave UniVersa-Lok swaged-type
connections, socketweld to O.D. tube or nominal pipe size,
male or female AN connections and others.
Materials
All Autoclave adapters are precision machined from coldworked
Type 316 stainless steel. Other materials available on
special order.
Note: Special material couplings may be supplied with four flats in place of
standard hex.
Note:
All AE adapters are supplied complete with appropriate glands, collars, tube nuts and sleeves unless
specified without.
* The maximum pressure rating for an adapter is determined by the connection component with the
LOWEST pressure rating; that is, the two end connections and the tubing or pipe used, whichever is
LOWER.
CAUTION: See appropriate pressure section in reference to proper selection of tubing.
1/4” 3/8” 1/2” 5/8” 3/4” 1” 1/4” 3/8” 9/16”
JIC4 JIC6 JIC8 JIC10 JIC12 JIC16 SF250CX SF375CX SF562CX
Fits this Pressure 20,000 20,000 20,000 20,000 15,000 15,000 20,000 20,000 20,000
Female Rating (1378.93) (1378.93) (1378.93) (1378.93) (1034.20) (1034.20) (1378.93) (1378.93) (1378.93)
Connection PSI (bar)*
1/4” JIC4 20MFAJ4M4 20MFAJ4M6 20MFAJ4M9
3/8” JIC6 20MFAJ6M4 20MFAJ6M6 20MFAJ6M9
1/2” JIC8 20MFAJ8M4 20MFAJ8M6 20MFAJ8M9
5/8” JIC10
3/4" JIC12 15MFAJ12M4 15MFAJ12M6 15MFAJ12M9
1" JIC16 15MFAJ16M4 15MFAJ16M6 15MFAJ16M9
1/4” SF250CX 20MFAM4J4 20MFAM4J6
3/8” SF375CX
9/16” SF562CX
3/4” SF750CX 20MFAM12J4
1” SF1000CX
1/4” F250C 20MFAH4J4
3/8” F375C
9/16” F562C
1/4” NPT
3/8” NPT 15MFAP6J6
1/2” NPT
3/4” NPT
1” NPT
15,000
(1034.20)
15,000
(1034.20))
15,000
(1034.20)
All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
High Pressure National Pipe Thread (NPT)
FEMALE END
Medium Pressure
15MFAJ12M12 15MFAJ12M16
31
3/4” 1” 1/4” 3/8” 9/16” 1/4” 3/8” 1/2” 3/4" 1"
F750CX F1000CX F250C F375C F562C NPT NPT NPT NPT NPT
20,000 20,000 60,000 60,000 60,000 15,000 15,000 15,000 10,000 10,000
(1378.93) (1378.93) (4136.85) (4136.85) (4136.85) (1034.20) (1034.20) (1034.20) (689.45) (689.45)
20MFAJ4M12 20MFAJ4M16 20MFAJ4H4 20MFAJ4H6 20MFAJ4H9 15MFAJ4P4 15MFAJ4P8
20MFAJ6M12 20MFAJ6M16 20MFAJ6H6
20MFAJ8M12 20MFAJ8M16
15MFAJ16M12 15MFAJ16M16
AE Male/Female Adapters are available in a “one-piece” design. They are identical to the two piece designs in
length and can be ordered by adding the suffix - OP to the two piece adapter part numbers listed.
For b service, Autoclave stocks select products. Consult factory.
Female
End
Male End
Fits this
Connection
Catalog
Number
Dimension inches (mm)
A Hex B
Adapters/Couplings - Male/Female JIC Adapters
B
A
Hex
32
JIC to Medium Pressure
1/4" JIC SF250CX 20MFAJ4M4 .63 (15.9) 1.25 (31.8)
1/4" JIC SF375CX 20MFAJ4M6 .75 (19.1) 1.50 (38.1)
1/4" JIC SF562CX 20MFAJ4M9 1.00 (25.4) 1.88 (47.8)
1/4" JIC SF750CX 20MFAJ4M12 1.38 (35.1) 2.13 (54.0)
1/4" JIC SF1000CX 20MFAJ4M16 1.75 (44.5) 2.75 (69.9)
3/8" JIC SF250CX 20MFAJ6M4 .63 (15.9) 1.25 (31.8)
3/8" JIC SF375CX 20MFAJ6M6 .75 (19.1) 1.44 (36.5)
3/8" JIC SF562CX 20MFAJ6M9 1.00 (25.4) 1.88 (47.8)
3/8" JIC SF750CX 20MFAJ6M12 1.38 (35.1) 2.13 (54.0)
3/8" JIC SF1000CX 20MFAJ6M16 1.75 (44.5) 2.62 (66.5)
1/2" JIC SF250CX 20MFAJ8M4 .81 (20.6) 1.63 (41.3)
1/2" JIC SF375CX 20MFAJ8M6 .81 (20.6) 1.75 (44.5)
1/2" JIC SF562CX 20MFAJ8M9 1.00 (25.4) 1.88 (47.8)
1/2" JIC SF750CX 20MFAJ8M12 1.38 (35.1) 2.25 (57.2)
1/2" JIC SF1000CX 20MFAJ8M16 1.75 (44.5) 2.75 (69.9)
3/4" JIC SF250CX 15MFAJ12M4 1.38 (35.1) 2.00 (50.8)
3/4" JIC SF375CX 15MFAJ12M6 1.38 (35.1) 2.00 (50.8)
3/4" JIC SF562CX 15MFAJ12M9 1.38 (35.1) 2.00 (50.8)
3/4" JIC SF750CX 15MFAJ12M12 1.38 (35.1) 2.25 (57.2)
3/4" JIC SF1000CX 15MFAJ12M16 1.75 (44.5) 3.25 (82.6)
1" JIC SF250CX 15MFAJ16M4 1.50 (38.1) 2.00 (50.8)
1" JIC SF375CX 15MFAJ16M6 1.50 (38.1) 2.00 (50.8)
1" JIC SF562CX 15MFAJ16M9 1.50 (38.1) 2.25 (57.2)
1" JIC SF750CX 15MFAJ16M12 1.38 (35.1) 2.62 (66.5)
1" JIC SF1000CX 15MFAJ16M16 1.75 (44.5) 3.25 (82.6)
JIC to High Pressure
1/4" JIC SF250C 20MFAJ4H4 .75 (19.1) 1.38 (35.1)
1/4" JIC SF375C 20MFAJ4H6 1.00 (25.4) 1.50 (38.1)
1/4" JIC SF562C 20MFAJ4H9 1.38 (35.1) 2.00 (50.8)
3/8" JIC SF375C 20MFAJ6H6 1.00 (25.4) 1.50 (38.1)
JIC to NPT
1/4" JIC 1/4" NPT 15MFAJ4P4 .94 (23.8) 1.50 (38.1)
1/4" JIC 1/2" NPT 15MFAJ4P8 1.19 (30.1) 1.88 (47.8)
Medium Pressure to JIC
SF250CX 1/4" JIC 20MFAM4J4 .75 (19.1) 1.56 (39.7)
SF250CX 3/8" JIC 20MFAM4J6 .81 (20.6) 1.50 (38.1)
SF750CX 1/4" JIC 20MFAJ12J4 1.19 (30.1) 2.00 (50.8)
High Pressure to JIC
F250C 1/4" JIC 20MFAH4J4 .75 (19.1) 1.50 (38.1)
NPT to JIC
3/8" NPT 3/8" JIC 15MFAP6J6 .81 (20.6) 1.50 (38.1)
All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 33
Adapters/Couplings - EZ-Union Adapters
Autoclave Engineers offers an EZ-Union adapter providing a fast
and simple way to install or remove components from a pressure
system. The face seal o-ring design provides a positive seal with
easy and reliable operation. EZ-Union adapters can be provided with
any standard or special connection combination. Optional materials
available upon request. Contact your local Sales Representative
for optional inbation and sizes not shown. The following tables
show the standard adapters with dimensions.
EZ-Union Adapter
Ordering Procedure
Typical catalog number: 20 EZ M4 M4
20
Pressure
(X 1000 psi)
EZ
Available End Connections
M4 - 1/4” Medium Pressure
M6 - 3/8” Medium Pressure
M9 - 9/16” Medium Pressure
M12 - 3/4” Medium Pressure
M16 - 1” Medium Pressure
H4 - 1/4” High Pressure
H6 - 3/8” High Pressure
H9 - 9/16” High Pressure
P4 - 1/4” NPT
P6 - 3/8” NPT
P8 - 1/2” NPT
P12 - 3/4” NPT
P16 - 1” NPT
EZ- Male to Female
EZMA- Male to Male
Note: Special material EZ-Unions may be supplied with four flats in place of standard hex.
M4 M4
"F" "G"
For Butt-Weld or specials contact factory.
O-Ring Seal
Nut
Male
Connection
“F”
Female
Connection
“G”
When ordering Male to Female adapters, Male connection is listed first.
Catalog
Number
Dimension inches (mm)
EZ-Union Male to Female Adapters
EZ-Union Male to Male Adapters
Note1: EZ-Unions are constructed from 316 SS and are supplied with a Viton o-ring as standard.
Note 2: Gland and collar supplied with medium and high pressure connections.
Maximum pressure rating is based on the lowest rating of any component.
Actual working pressure may be determined by tubing pressure rating, if lower.
Note: For pressure rating see ordering procedure.
All Dimensions for reference only and subject to change.
For b service, Autoclave stocks select products. Consult factory.
34 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
A
B
E
Male
Connection
“F”
D
C
Female
Connection
“G”
A B C Hex D Hex E Min Opening
Female
"G" Connection
Pressure
Rating psi (bar)
Catalog
Number
Dimension inches (mm)
A B C Hex D Hex E Min Opening
Pressure
Rating psi (bar)
20EZMAH4H6 M250C M375C 20,000 (1379) 5.94 (150.88) 3.56 (90.42) 1.00 (25.40) 0.81 (20.57) 0.09 (2.29)
10EZMAP12M12 SM750CX20 3/4" NPT 10,000 (690) 6.50 (165.10) 3.25 (82.55) 1.75 (44.45) 0.87 (22.05)* 0.44 (11.13)
*across flats
Male
"F" Connection
Male
"G" Connection
Male
"F" Connection
A
B
E
C
D
Male
Connection
“F”
Male
Connection
“G”
20EZM4M4 SM250CX20 SF250CX20 20,000 (1379) 3.13 (79.50) 1.00 (25.40) 1.00 (25.40) 0.81 (20.57) 0.109 (2.77)
10EZM9M9 SM562CX20 SF562CX20 10,000 (690) 4.63 (117.60) 1.63 (41.40) 1.75 (44.45) 1.38 (34.93) 0.31 (7.92)
10EZM12M12 SM750CX20 SF750CX20 10,000 (690) 4.63 (117.60) 1.38 (35.05) 1.75 (44.45) 1.50 (38.10) 0.44 (11.13)
10EZM16M16 SM1000CX20 SF1000CX20 10,000 (690) 6.44 (163.58) 2.31 (58.67) 1.75 (44.45) 1.75 (44.45) 0.56 (14.27)
10EZP12M12 3/4" NPT SF750CX20 10,000 (690) 4.63 (117.60) 1.38 (35.05) 1.75 (44.45) 1.50 (38.10) 0.44 (11.13)
10EZM16P8 SM1000CX20 1/2" NPT 10,000 (690) 5.38 (136.65) 1.25 (31.75) 1.75 (44.45) 1.38 (35.05) 0.56 (14.27)
All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 35
Adapters/Couplings - Butt-Weld Adapters
Autoclave Engineer’s Butt-Weld adapters are available in a number
of configurations. The following tables show models for all three
pressure ranges. Models not shown and special material adapters
are available upon request. Contact your local Sales Representative
for more inbation.
Butt-Weld Adapter
Butt-Weld Adapters
Butt-Weld End
Female
Connection
Weld Connection Size/Schedule
Type
AE Low Pressure - Female Connection
Pipe Butt-Weld 3/4” / XXS M128W2B-XXS
SW250 SW375 SW500
Weld Connection Size/Schedule
Type
AE Medium Pressure - Female Connection
SF250CX SF375CX SF562CX SF750CX SF1000CX
Pipe Butt-Weld 1/4” / 80 M44W6B-XS M46W6B-XS M49W6B-XS
Pipe Butt-Weld 3/8” / 80 M64W6B-XS M66W6B-XS M69W6B-XS M612W6B-XS
Pipe Butt-Weld 1/2” / 80 M84W6B-XS M89W6B-XS
Pipe Butt-Weld 1/2” / XXS M89W6B-XXS M812W6B-XXS M816W6B-XXS
Pipe Butt-Weld 3/4” / 80 M129W6B-XS
Pipe Butt-Weld 3/4” / 160 M129W6B-160
Pipe Butt-Weld 3/4” / XXS M129W6B-XXS M1212W6B-XXS M1216W6B-XXS
Pipe Butt-Weld 1” / XXS M1616W6B-XXS
Weld Connection Size/Schedule
Type
AE High Pressure - Female Connection
Pipe Butt-Weld 1” / XXS M169W3B-XXS
F250C F375C F562C F562C40 SF1000CX43
Note: Standard Butt-weld adapters made from 316 SS.
Pipe Butt-Weld 1/8” / 80 M24W6B-XS M26W6B-XS
Butt-Weld to Low-Pressure
Male
BW
Catalog
Number
Female
LP
Dimension inches (mm)
A Hex
M128W2B-XXS 3/4” SW500 10,000 689.5 1.19 (30.23) 2.00 (50.80) 0.81 (20.57)
B C
Butt-Weld to Medium-Pressure
Male
BW
Catalog
Number
Dimension inches (mm)
A Hex B C
Butt-Weld to High-Pressure
Male
BW
Catalog
Number
Female
LP
Dimension inches (mm)
A Hex
M169W3B-XXS 1” F562C 10000 689.5 1.38 (34.93) 2.44 (61.90) 1.22 (30.99)
B C
B
C
A
Gland and collar supplied with high pressure connections.
Maximum pressure rating is based on the lowest rating of any component.
Actual working pressure may be determined by piping pressure rating, contact factory.
Note: For pressure rating see ordering procedure.
All Dimensions for reference only and are subject to change.
For b service, Autoclave stocks select products. Consult factory.
36 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Female
M/P
Pressure Rating
psi bar
Pressure Rating
psi bar
M24W6B-XS 1/8” SF250CX 8500 586.0 0.63 (15.88) 1.00 (25.40) 0.38 (9.53)
M26W6B-XS 1/8” SF375CX 8500 586.0 0.75 (19.05) 1.31 (33.32) 0.38 (9.53)
M44W6B-XS 1/4” SF250CX 8000 551.6 0.63 (15.88) 1.18 (29.97) 0.56 (14.27)
M46W6B-XS 1/4” SF375CX 8000 551.6 0.75 (19.05) 1.50 (38.10) 0.56 (14.27)
M49W6B-XS 1/4” SF562CX 8000 551.6 1.00 (25.40) 1.56 (39.67) 0.56 (14.27)
M64W6B-XS 3/8” SF250CX 6500 448.2 0.75 (19.05) 1.25 (31.75) 0.63 (15.88)
M66W6B-XS 3/8” SF375CX 6500 448.2 0.75 (19.05) 1.56 (39.67) 0.63 (15.88)
M69W6B-XS 3/8” SF562CX 6500 448.2 1.00 (25.40) 1.63 (41.28) 0.63 (15.88)
M612W6B-XS 3/8” SF750CX 6500 448.2 1.38 (34.93) 1.94 (49.20) 0.63 (15.88)
M84W6B-XS 1/2” SF250CX 6000 413.7 1.00 (25.40) 1.38 (34.93) 0.81 (20.57)
M89W6B-XS 1/2” SF562CX 6000 413.7 1.00 (25.40) 1.81 (45.97) 0.81 (20.57)
M89W6B-XXS 1/2” SF562CX 10000 689.5 1.00 (25.40) 1.81 (45.97) 0.81 (20.57)
M812W6B-XXS 1/2” SF750CX 10000 689.5 1.38 (34.93) 2.13 (53.98) 0.81 (20.57)
M816W6B-XXS 1/2” SF1000CX 10000 689.5 1.75 (44.45) 2.81 (71.37) 0.81 (20.57)
M129W6B-XS 3/4” SF562CX 5000 344.7 1.19 (30.23) 1.81 (45.97) 0.81 (20.57)
M129W6B-160 3/4” SF562CX 7500 517.1 1.19 (30.23) 2.00 (50.80) 0.81 (20.57)
M129W6B-XXS 3/4” SF562CX 10000 689.5 1.19 (30.23) 2.00 (50.80) 0.81 (20.57)
M1212W6B-XXS 3/4” SF750CX 10000 689.5 1.38 (34.93) 2.06 (52.32) 0.81 (20.57)
M1216W6B-XXS 3/4” SF1000CX 10000 689.5 1.75 (44.45) 2.69 (68.25) 0.81 (20.57)
M1616W6B-XXS 1” SF1000CX 10000 689.5 1.75 (44.45) 3.25 (82.55) 1.31 (33.32)
Pressure Rating
psi bar
All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 37
Adapters/Couplings - Header Couplings
Autoclave Engineer’s offers weld style Header Couplings in a number
of designs and materials. The standard materials are SAE-4130
and Inconel 625. Other materials are listed in the tables. Header
couplings are available drilled through or blind drilled, allowing final
drill through after welding. The couplings can be supplied with any
style of Autoclave connection or special connections if required.
Header couplings come standard with 316 SS glands and collars for
our medium and high-pressure connections. Models not shown are
available upon request. Contact your local sales representative.
Header Coupling
Ordering Procedure
Typical catalog number: HC F M16 W 625 DT
HC
Header
Coupling
F M16 W
Available
End Connections
M4 - 1/4” Medium Pressure
M6 - 3/8” Medium Pressure
M9 - 9/16” Medium Pressure
M12 - 3/4” Medium Pressure
M16 - 1” Medium Pressure
H4 - 1/4” High Pressure
H6 - 3/8” High Pressure
H9 - 9/16” High Pressure
Female
Connection
625 DT
Welded Drilled
Through
SAE 4130 - 4130
Inconel 625 - 625
2205 Duplex - 2205
316 SS - 316
A105 - 105
A105N - 105 Normalized
Option
P4 - 1/4” NPT
P6 - 3/8” NPT
P8 - 1/2” NPT
P12 - 3/4” NPT
P16 - 1” NPT
37.5°
Material
Catalog
Number
Pressure
psi (bar)
Female Dimension inches (mm)
M/P A Flats
Female Medium-Pressure Header Coupling Blind End
B C
Gland and collar supplied with high pressure connections.
Maximum pressure rating is based on the lowest rating of any component.
Actual working pressure may be determined by tubing pressure rating, if lower.
All Dimensions for reference only and are subject to change.
For b service, Autoclave stocks select products. Consult factory.
38 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
E
Material
Catalog
Number
Pressure
psi (bar)
Female Dimension inches (mm)
H/P A Flats
HCFH9W316 316SS 30,000 (2068) F562C 1.50 (38.10) 2.31 (58.67) 1.19 (30.18) 1.31 (33.27) 0.19 (4.75)
HCFH9W4130 SAE-4130 15,000 (1034) F562C 1.50 (38.10) 2.31 (58.67) 1.19 (30.18) 1.31 (33.27) 0.19 (4.75)
HCFH9W625 Inconel 625 30,000 (2068) F562C 1.50 (38.10) 2.31 (58.67) 1.19 (30.18) 1.31 (33.27) 0.19 (4.75)
HCFH16W4130 SAE-4130 20,000 (1379) SF1000CX43 1.75 (44.45) 3.00 (76.20) 1.05 (26.59) 1.32 (33.53) 0.44 (11.10)
HCFH16W625 Inconel 625 22,000 (1551) SF1000CX43 1.75 (44.45) 3.00 (76.20) 1.05 (26.59) 1.32 (33.53) 0.44 (11.10)
Female High-Pressure Header Coupling Blind End
B C E
A
B
C
