The all new Endura AZ20 automatic calibration system?
eliminates the need for the expensive ancillary equipment?
required for automatic calibration on traditional flue gas?
oxygen analyzer systems. ABB’s fully integrated, automatic?
calibration feature controls the test gas sequence and?
detects test gas availability, eliminating incorrect calibrations?
due to loss of test gas.
Advanced automatic calibration facility
Integrated automatic calibration secures the oxygen?
measurement, providing complete confidence in the?
analyzer’s perbance.
Long-term operation without technician intervention?
minimizes operating costs, total cost-of-ownership,?
optimizes system accuracy and contributes to the CEMS?
(Continuous Emissions Monitoring Compliance). A significant?
proportion of service visits to an analyzer result in ‘no fault?
found’. Endura AZ20’s high-quality manufacture, advanced?
diagnostics and fully-integrated, automatic calibration is?
targeted at reducing this wasted effort and cost.
The AutoCal option can be used with or without the flow?
restrictors option.
—
Filter options
An optional large surface area filter for high dust applications?
is available and can be easily retro-fitted if required..?
6 ENDURA AZ20 OXYGEN MONITOR COMBUSTION GAS ANALYSIS | DS/AZ20-EN REV. L
—
Advanced transmitter
The Endura AZ20 transmitter incorporates the most up-to?date design and technology available today.
ABB’s universal human/machine interface (HMI) with its large,?
b, backlit graphical display, ‘through-the-glass’ control and?
intuitive menu structure simplifies transmitter configuration?
and operation.
The user-friendly interface enables fast, easy data entry for all?
beters and the ‘Easy Setup’ menu speeds and simplifies?
system commissioning.
Advanced diagnostics, in accordance with NAMUR NE107,?
classify alarms and warnings as ‘Maintenance Required’,?
‘Check Function’, ‘Failure’ and ‘Out-of-Specification’. Cell?
perbance is monitored by the transmitter; indicators such?
as cell impedance, rate-of-response to test gasses and?
changes in calibration offset/factor are recorded and?
analyzed. The current cell ‘quality’ is displayed by the?
transmitter as a visual indication of the measurement?
confidence; providing the operator all the inbation?
required to keep the monitor operating at peak perbance.
The perbance log holds up to 100 time-stamped events.?
When the log is full, the oldest data is overwritten by new?
entries. The log contains details of measurements and?
coefficients for all calibrations and accuracy checks.
2 relay outputs and a traditional analog output are fitted as?
standard, with the option of adding a second analog output?
or 2 digital bs/outputs (I/O).
The Endura AZ20 transmitter is equipped with HART?
communication as standard, supported by a full Device Type?
Manager (DTM) to enable remote access to the analyzer?
through a user-friendly graphical interface. The DTM provides?
full access to the transmitter setup, logged data and?
diagnostics inbation as well as live data.
The IrDA standard infrared communication port can also be?
used with the DTM to upload and download device?
configurations. In addition, it enables data logged values and?
diagnostics to be viewed on a hyperterminal interface or a PC.?
The device’s firmware can also be upgraded using this port.
DTM graphical interface
Probe connections
? Cell
? Thermocouple
? ACJC
? Heater
Digital I/O
? 2 User-configurable as?
b or output
? Input: volt-free contacts
? Output: 30 V DC @ 220 mA
Relay outputs
? 2 x Relays
? Normally closed contacts
? 5 A @ 230 V AC, 30 V DC
Analog output
? Galvanically isolated
? Programmable over 4 to 20 mA
AutoCal control
? 2 solenoid valve outputs
? 2 test gas detection b
Analog output
? Galvanically isolated
? Programmable over 0 to 20 mA
HART communications
Key
Standard Option
ENDURA AZ20 OXYGEN MONITOR COMBUSTION GAS ANALYSIS | DS/AZ20-EN REV. L 7
—
Transmitter options
There are 2 Endura AZ20 transmitter options – probe with integral transmitter and probe with remote transmitter:
Probe with remote transmitter
Probe with integral transmitter
20 mm or?
1/2 in. NPT?
gland
*Designed to withstand 35 kPa
(5.1 psi) – positive or negative
(pressure compensation
required above 5 kPa [0.7 psi] –
transmitter can supply fixed
pressure compensation)
**Transmitter does not contain
a reference air supply for the
probe.
Probe
Probe
Flue*
Flue*
Remote?
transmitter**
Integral?
transmitter**
Output signals
Mains supply
Mains supply
Relays
Relays
Output signals
Endura AZ20 probe cable (ABB supplied)
– max. 100 m (328 ft.)
Endura AZ20 transmitter options
8 ENDURA AZ20 OXYGEN MONITOR COMBUSTION GAS ANALYSIS | DS/AZ20-EN REV. L
—
Test gas and reference air supply configurations
Automatic calibration (AutoCal) systems
Vent to dry area (unrestricted flow)
Probe
Clean dry oil-free?
instrument air in –
10 bar (145 psi) max.
1 bar (15 psi)
1 bar (15 psi)
5 μm / oil-coalescing?
filter-regulator
Reference air
Test gas 1
Test gas 2 (optional)
AutoCal with air supply and restrictors
1 bar (15 psi)
1 bar (15 psi)
Reference air supply
?0.3 to 0.5 l/min?
(0.64 to 1.06 scfh) preset flow
Vent to dry area?
(unrestricted flow)
Probe
Test gas 1
Test gas 2 (optional)
Reference air pump*
*Refer to page 17 for part numbers
AutoCal with test gas(es) and restrictors
1 bar (15 psi)
1 bar (15 psi)
5 μm / oil-coalescing?
filter-regulator
**ABB?
flowmeter
Vent to dry area?
(unrestricted flow)
Probe
Reference air
Test gas 1
*ABB?
flowmeter
* ABB?
flowmeter
*Flow set to 2.2 l/min (4.662 scfh) STP
**Flow set to 0.3 to 0.5 l/min (0.64 to 1.06 scfh) STP
Test gas 2 (optional)
Clean dry oil-free?
instrument air in –
10 bar (145 psi) max.
AutoCal with air supply and no restrictors
1 bar (15 psi)
*ABB flowmeter
1 bar (15 psi)
Reference air supply
0.3 to 0.5 l/min
(0.64 to 1.06 scfh) preset flow
Probe
Vent to dry area?
(unrestricted flow)
Reference air pump**
Test gas 1
*ABB?
flowmeter
* *Flow set to 2.2 l/min (4.662 scfh) STP
**Refer to page 17 for part numbers
Test gas 2 (optional)
AutoCal with test gas(es) and no restrictors
ENDURA AZ20 OXYGEN MONITOR COMBUSTION GAS ANALYSIS | DS/AZ20-EN REV. L 9
Non-automatic calibration (non-AutoCal) systems
Probe
Vent to dry area?
(unrestricted flow)
Reference air
Clean dry oil-free?
instrument air in –
10 bar (145 psi) max.
Test gas 1
3-way valve
*Shut-off valve
1 bar (15 psi)
1 bar (15 psi)
5 μm / oil-coalescing?
filter-regulator
Test gas 2 (optional)
*Shut-off valve for test gas runs >10 m (33 ft.)
Non-AutoCal with air supply and restrictors
Probe
Vent to dry area (unrestricted flow)
Reference?
air pump**
Test gas 1 3-way
valve
*Shut-off valve
1 bar (15 psi)
1 bar (15 psi)
Test gas 2 (optional)
*Shut-off valve for test gas runs >10 m (33 ft.)
**Refer to page 17 for part numbers
Reference air supply
0.3 to 0.5 l/min
(0.64 to 1.06 scfh) preset flow
Non-AutoCal with test gas(es) and restrictors
Probe
Vent to dry area?
(unrestricted flow)
Clean dry oil-free?
instrument air in –
10 bar (145 psi) max.
1 bar (15 psi)
1 bar (15 psi)
5 μm / oil-coalescing?
filter-regulator
Test gas 2 (optional)
*Shut-off valve for test gas runs >10 m (33 ft.)
**Flow set to 2.2 l/min (4.662 scfh) STP
***Flow preset to 0.3 to 0.5 l/min (0.64 to 1.06 scfh) STP
3-way valve
Test gas 1
**ABB?
flow meter
***ABB?
flow meter
*Shut-off valve
Non-AutoCal with air supply and no restrictors
Probe
Vent to dry area (unrestricted flow)
Reference?
air pump***
Test gas 1
3-way valve
**ABB?
flow meter
*Shut-off valve
1 bar (15 psi)
1 bar (15 psi)
Test gas 2 (optional)
*Shut-off valve for test gas runs >10 m (33 ft.)
**Flow set to 2.2 l/min (4.662 scfh) STP
***Refer to page 17 for part numbers
Reference air supply
0.3 to 0.5 l/min
(0.64 to 1.06 scfh) preset flow
Non-AutoCal with test gas(es) and no restrictors
10 ENDURA AZ20 OXYGEN MONITOR COMBUSTION GAS ANALYSIS | DS/AZ20-EN REV. L
—
Overall dimensions
Probe and integral transmitter
Dimensions in mm (in.)
390 (15.3)
407 (16.0)
? 135 (5.3) 341
(13.4)
? 62 (2.4)
168 (6.6)
55
(2.2)
Dimensions from flange to probe cell in m (ft.)
0.5, 1.0, 1.5, 2.0, 2.5, 3.0, 3.5 or 4.0
(1.7, 3.3, 5.0, 6.6, 8.2, 9.9, 11.5, 13.1)
For flange dimensions refer to page 12
Overall dimensions – probe and integral transmitter
Length m (ft.) Unpacked – kg (lb) Packed – kg (lb)
0.5 (1.7) 12.5 (27.5) 17.72 (39.1)
1.0 (3.3) 14.8 (32.5) 21.43 (47.3)
1.5 (5.0) 17.0 (37.5) 25.14 (55.5)
2.0 (6.6) 19.3 (42.5) 28.35 (63.6)
2.5 (8.2) 21.5 (47.5) 34.17 (75.4)
3.0 (9.9) 23.8 (52.4) 37.38 (83.5)
3.5 (11.5) 26.0 (57.4) 41.59 (91.7)
4.0 (13.1) 28.3 (62.3) 45.30 (99.9)
Weights – probe and integral transmitter
ENDURA AZ20 OXYGEN MONITOR COMBUSTION GAS ANALYSIS | DS/AZ20-EN REV. L 11
Remote probe
Dimensions in mm (in.)
384 (15.2)
203
(8.0)
? 135 (5.3)
? 62 (2.4)
55
(2.2)
Dimensions from flange to probe cell in m (ft.)
0.5, 1.0, 1.5, 2.0, 2.5, 3.0, 3.5 or 4.0
(1.7, 3.3, 5.0, 6.6, 8.2, 9.9, 11.5, 13.1)
For flange dimensions refer to page 12
Overall dimensions – remote probe
Length m (ft.) Probe only?
unpacked – kg (lb)
Probe only?
packed – kg (lb)
Probe and remote transmitter?
unpacked – kg (lb)
Probe and remote transmitter?
packed – kg (lb)
0.5 (1.7) 9 (19.9) 14.2 (31.4) 11.5 (25.4) 16.7 (36.9)
1.0 (3.3) 11.3 (24.9) 17.9 (39.6) 13.6 (30.3) 20.5 (45.1)
1.5 (5.0) 13.5 (29.8) 21.7 (47.7) 16.0 (35.3) 24.2 (53.3)
2.0 (6.6) 15.8 (34.8) 25.4 (55.9) 18.3 (40.3) 27.9 (61.4)
2.5 (8.2) 18 (39.7) 30.7 (67.7) 20.5 (42.2) 33.2 (73.2)
3.0 (9.9) 20.3 (44.7) 34.4 (75.8) 22.8 (50.2) 36.9 (81.3)
3.5 (11.5) 22.5 (49.6) 38.1 (84.0) 25.0 (55.2) 40.6 (89.5)
4.0 (13.1) 24.8 (54.6) 41.8 (92.2) 27.3 (60.1) 44.3 (97.7)
Weights – remote probe
Remote transmitter
Dimensions in mm (in.)
98 (3.9) R3.2 (0.1)
71
(2.8)?
150 (5.9)
179 (7.0)
202 (8) – standard gland
Overall dimensions – remote transmitter (standard gland shown)
12 ENDURA AZ20 OXYGEN MONITOR COMBUSTION GAS ANALYSIS | DS/AZ20-EN REV. L
—
Probe flanges (all probe lengths) and mounting plates for standard probe flanges?
Dimensions in mm (in.).
Note. The pressure ratings for these flanges do not apply.
Flange type A B C (?) D (PCD)
ABB standard?
(0.5 m [1.7 ft.]?
probes only)
101 (3.97) 6 (0.24) 7.3 (0.29) 80 (3.15)
ABB standard 165 (6.50) 12 (0.47) 12.5 (0.50) 140 (5.51)
A
C B
D
ABB probe flange types, dimensions
Flange type A B C D
0.5 m (1.7 ft.) 160 (6.3) 160 (6.3) 7 (0.27) 16 (0.63)
1.0 to 4.0 m?
(3.3 to 13.1 ft.)
203 (8.0) 203 (8.0) 20 (0.79) 32 (1.26)
Comprising: mounting plate, gasket, 6 each: M6 / M10 shakeproof?
washers, plain washers and nuts
A
B
C
D
6 M6 studs?
equispaced on?
80 (3.15) PCD
Standard mounting plate for 0.5 m (1.7 ft.) probe – part no. AZ200 796
A
B
C
D
6 M10 studs?
equispaced on?
140 (5.5) PCD
Standard mounting plate for 1.0 to 4 m (3.3 to 13.1 ft.) probes –?
Part No. AZ200 795
ABB flange mounting plates
Flange type A B C (?) D (PCD)
ANSI 2 in. 150 152.4 (6.00) 12 (0.47) 19 (0.75) 120.6 (4.75)
ANSI 2.5 in. 150 177.8 (7.00) 12 (0.47) 19 (0.75) 139.7 (5.50)
ANSI 3 in. 150 190.5 (7.50) 12 (0.47) 19 (0.75) 152.4 (6.00)
DIN 65 PN16 185 (7.28) 12 (0.47) 18 (0.70) 145 (5.70)
JIS 65 5K 155 (6.10) 12 (0.47) 15 (0.59) 130 (5.12)
JIS 80 5K 180 (7.08) 12 (0.47) 19 (0.75) 145 (5.71)
A
B
C
D
4-hole probe flange types and dimensions
Flange type A B C (?) D (PCD)
ANSI 4 in. 150 228.6 (9.0) 12 (0.47) 19 (0.75) 190.5 (7.50)
DIN 80 PN16 200 (7.87) 12 (0.47) 18 (0.70) 160 (6.30)
DIN 100 PN16 220 (8.66) 12 (0.47) 18 (0.70) 180 (7.08)
JIS 100 5K 200 (7.87) 12 (0.47) 19 (0.75) 165 (6.50)
A
B
C
D
8-hole probe flange types and dimensions
ENDURA AZ20 OXYGEN MONITOR COMBUSTION GAS ANALYSIS | DS/AZ20-EN REV. L 13
—
Electrical connections – remote transmitter to probe
Transmitter terminal No. Probe terminal color label Tag ID Connection type Cable color code
1 Brown H Heater Brown
2 Blue H Heater Blue
3 Light yellow (SCN) SCN Screen Screens
4 White T/C – Thermocouple (–ve) White
5 Green TC+ Thermocouple (+ve) Green
6 Grey ACJC PT1000 cold junction compensation Grey
7 Violet ACJC PT1000 cold junction compensation Violet
8 Black CELL – Oxygen b (–ve) Black
9 Red CELL + Oxygen b (+ve) Red
10 White/Yellow PS2 Pressure switch – gas 2 White/Yellow
11 White/Black P COM Pressure switch – common White/Black
12 White/Orange PS1 Pressure switch – gas 1 White/Orange
13 White/Blue SV2 Solenoid valve – gas 2 White/Blue
14 White/Red SV COM Solenoid valve – common White/Red
15 White/Green SV1 Solenoid valve – gas 1 White/Green
Transmitter to probe connections
10 P2
1 H 2 H
12 P1 13 SV2 15 SV 1
14 SV COM
11 P COM ACJC (violet)
ACJC (grey)
Cell + (red)
Cell – (black)
T/C + (green)
T/C – (white)
SCN (screen)
H (brown)?
H (blue)
9 Cell +
8 Cell –
7 ACJC
6 ACJC
5 T/C +
4 T/C –
3 SCN
PS 2 (white / yellow)
PS COM (white / black)?
PS 1 (white / orange)
SV 1 (white / green)
SV COM (white / red)
SV 2 (white / blue)
Connections at remote transmitter Connections at probe head
Electrical connections – remote transmitter and probe
14 ENDURA AZ20 OXYGEN MONITOR COMBUSTION GAS ANALYSIS | DS/AZ20-EN REV. L
—
Integral transmitter – power supply and output connections
1
L
N
10
9
8
7
6
5
4
3
2
NC
C
NC
C
+
–
A
B
C
External earth?
connection
*Option board connections A B C
Analog output + –
Digital I/O DIO1 DIO2 COM
Mains power
Relay 1
Relay 2
Current output
(4 to 20 mA) HART
* Option board?
connections
Integral transmitter – power supply and output connections
—
Remote transmitter – power supply and output connections L/L1 N/L2 N/C
C
N/C
C
A B C +?
–
Mains Relay 1 Relay 2?
Fuse F1 (AC) 1.0 A Type F
100 to 240 V AC (±10 %)
50/60 Hz
Current output?
(4 to 20 mA) HART
*Option board?
connections
Brown
Blue
Green/Yellow
*Option board connections A B C
Analog output + –
Digital I/O DIO1 DIO2 COM
Remote transmitter – power supply and output connections
ENDURA AZ20 OXYGEN MONITOR COMBUSTION GAS ANALYSIS | DS/AZ20-EN REV. L 15
—
System specification
Measurement perbance
Range:
0.01 to 100 % O2
Test gas response time
? Initial dead time 3 seconds
? T90 < 10 seconds
System accuracy
< ±0.75 % of reading or 0.05 % O2, whichever is the greater,?
based on a nominal range of 0.01 to 25 % O2 or?
20 to 100 % O2
Drift
? < ± 1 % maximum % O2 range value per month?
(without calibration)
? < ± 0.2 % typical
Environmental data
Ambient operating temperature
? Transmitter –20 to 55 °C (–4 to 131 °F)
? Probe –20 to 70°C (–4 to 158 °F)
Storage temperature
–40 to 85 °C (–40 to 185 °F)
Operating humidity
Up to 95 % RH, non-condensing
Sunlight
Store and operate out of direct sunlight
Ingress protection?
? Probe (excludes remote/integral transmitter):
IP66 (NEMA 4X)
? Electronics enclosures – remote and integral:
IP66 (NEMA 4X)
Power supply
AC power supply
100 to 240 V AC ±10 % (90 V min. to 264 V max.) 50 / 60 Hz
Electronics
< 10 W
Probe heater
< 100 W
EMC
Emissions and immunity
Conbs to EN61326-1:2006
Safety
General safety
Conbs to EN61010-1: 2001
Approvals and safety certification
CE mark
16 ENDURA AZ20 OXYGEN MONITOR COMBUSTION GAS ANALYSIS | DS/AZ20-EN REV. L
—
Probe specification
Physical
Probe insertion lengths
? 0.5 m (1.7 ft.)
? 1.0 m (3.3 ft.)
? 1.5 m (5.0 ft.)
? 2.0 m (6.6 ft.)
? 2.5 m (8.2 ft.)
? 3.0 m (9.9 ft.)
? 3.5 m (11.5 ft.)
? 4.0 m (13.1 ft.)
Process connection
? All probe lengths
– ANSI B16.5 150 lb
– 2, 2.5, 3, 4 in
– DIN2501 Part 1
– 65, 80, 100 mm
– JIS B2238 5K
– NPT
(flange pressure ratings do not apply)
? 0.5 m (1.7 ft.) probes
ABB 500 mm (19.7 in) standard flange
? 1.0 m (3.3 ft.) and longer
ABB 1000 mm (39.4 in) standard flange
Probe body material
316L stainless steel
Mounting angle
Horizontal to vertically down
Note. Horizontally-mounted probes greater than?
2.0 m (6.6 ft.) in length may need to be supported.
Process conditions
Standard process temperature
All probe lengths* –20 to 800 °C (–4 to 1472 °F)
Process pressure
Designed to withstand 35 kPa (5.1 psi) – positive or?
negative (pressure compensation required above 5 kPa?
(0.7 psi) – transmitter can apply fixed pressure?
compensation)
* For > 2 m (6.6 ft.) probes, special conditions may apply
Operating requirements
Reference air
Regulated?
supply
Probes with?
restrictors
1 bar (15 psi),?
flowmeters not required
Probes without?
restrictors
1 bar (15 psi)?
flowmeters required with?
flow set to 0.3 to 0.5 l/min?
(0.64 to 1.06 scfh)
Pumped?
supply
Probes?
with / without?
restrictors
Preset flow?
0.3 to 0.5 l/min?
(0.64 to 1.06 scfh)
Test gas
User-selectable, 100 to 0.1 % O2 balance N2 and / or air?
(air is recommended as one of the test gases)
Probes with?
restrictors
1 bar (15 psi) – flowmeters not required?
as restrictors preset flow to 2.2 l/min?
(4.662 scfh)
Probes without?
restrictors
1 bar (15 psi) – flowmeters required,?
set to 2.2 l/min (4.662 scfh) flow
Calibration
Manual, semi-automatic or automatic?
(controlled by Endura AZ20 transmitter)
Automatic calibration
AutoCal hardware
? Optional built-in solenoid valves for control of?
test gas flow
? Built-in pressure switches to detect presence of?
test gases
Heater operational requirements
AZ20 Probe
Nominally 190 ?, 70 W at 115 V AC – power is limited to?
70 W max. by AZ20 transmitter over an 85 to 265 V AC?
range
AZ20 / ZFG2 replacement probe
Nominally 25 ?, 120 W at 55 V AC – for use only with a ZDT?
analyzer or ZMT transmitter
ENDURA AZ20 OXYGEN MONITOR COMBUSTION GAS ANALYSIS | DS/AZ20-EN REV. L 17
—
Transmitter specification
Transmitter enclosures
Remote
Wall-, pipe- or stand-mounted?
4 gland entries
Optional 1/2 in. NPT, M20
Integral
Head-mounted
3 gland entries
Optional 1/2 in NPT, M20
Automatic calibration
AutoCal hardware
? Isolated solenoid valve control as standard,?
24 V @ 2 W per valve*
? Dedicated isolated digital bs to monitor pressure?
switch contacts as standard – voltage-free, normally?
closed with gas present
Display and switches
Display type
Graphical 128 x 64 pixel LCD
Display backlight
Green LED
Operator switches
4 capacitive switches (operated through the front glass)
Relay outputs
Number
2 standard
Type
Normally closed, 5 A @ 230 V AC?
or 30 V DC (non-inductive)
Functions
User-configurable – can be activated by one or more of?
the following signals:
? Process alarm 1, 2, 3, 4
? Calibration in progress
? Calibration failed
? Out of test gas 1, 2
? Test gas 1 valve control
? Test gas 2 valve control
? Failure diagnostic
? Out-of-specification diagnostic
? Maintenance required diagnostic
? Function check diagnostic
*For driving internal automatic calibration (AutoCal) probes or can be?
used to drive external calibration units on remote transmitters only.
Analog outputs
Standard
? 1 isolated current output
? Programmable to retransmit oxygen (linear or?
logarithmic) or temperature
? Programmable over 4 to 20 mA
? Over-range capability to indicate system failure?
programmable from 4 to 22 mA
Optional
? 1 isolated current output
? Programmable to retransmit oxygen (linear or?
logarithmic) or temperature
? Programmable over 0 to 20 mA
? Over-range capability to indicate system failure?
programmable from 0 to 22 mA?
Digital bs / outputs
Number
2 (optional)
Type
User-configurable as either b or output
Input
Volt-free contact
Output
? Transistor switch capable of sinking 220 mA
? Low output, < 2 V DC
? Switch voltage 30 V DC maximum
Isolation
Not isolated from each other or from other circuitry
Input functions
User-configurable for:
? Automatic calibration start
? Automatic calibration stop
? Automatic calibration start / stop
Functions
User-configurable – can be activated by one or more of?
the following signals:
? Process alarm 1, 2, 3, 4
? Calibration in progress
? Calibration failed
? Out of test gas 1
? Out of test gas 2
? Test gas 1 valve control
? Test gas 2 valve control
? Failure diagnostic
? Out-of-specification diagnostic
? Maintenance required diagnostic
? Function check diagnostic
18 ENDURA AZ20 OXYGEN MONITOR COMBUSTION GAS ANALYSIS | DS/AZ20-EN REV. L
—
…Transmitter specification
Hart communications
Version
5.7 as standard
Integration
? Device Type Manager (DTM) and?
Electronic Device Debion (EDD)
? Provide online / offline device configuration, online?
monitoring of measurement values and diagnostic?
states
DTM
? FDT v1.2.1 compliant
? Works with FDT framework packages?
(for example, ABB Asset Vision Basic)
EDD
Compliant with suitable framework tools?
(for example, SDC 625 and Simatic PDM tools)
Infrared service port
Accessibility
Through front face
Type:
IrDA standard
Baud rate
Up to 115 K baud
Functions
? Firmware update
? Remote HMI
? Diagnostic log download
? Datalog output
? HART via IrDA
Languages?
English
Calibration
Manual calibration
? 1 point (offset)
? 1 point (factor)
? 2 point (offset + factor)
Automatic calibration
? 1 point (offset)
? 2 point (offset + factor)
Calibration control
? Front panel controls
? Digital bs
? HART commands
? User-defined schedule
Calibration scheduler
User-defined schedule enables automatic calibration?
frequency to be set from 1 day to 12 months
—
Part numbers for Endura AZ20 and AZ20 / ZFG2 replacement heaters,?
thermocouple / electrode assemblies and ABB flowmeters
Probe length Part number?
0.5 m (1.7 ft.) AZ200 710
1.0 m (3.3 ft.) AZ200 711
1.5 m (5.0 ft.) AZ200 712
2.0 m (6.6 ft.) AZ200 713
2.5 m (8.2 ft.) AZ200 714
3.0 m (9.9 ft.) AZ200 715
3.5 m (11.5 ft.) AZ200 716
4.0 m (13.1 ft.) AZ200 717
Endura AZ20 – standard heater assembly
Probe length Part number?
0.5 m (1.7 ft.) AZ200 720
1.0 m (3.3 ft.) AZ200 721
1.5 m (5.0 ft.) AZ200 722
2.0 m (6.6 ft.) AZ200 723
Endura AZ20 / ZFG2 replacement probe – heater assembly?
Probe length Part number?
0.5 m (1.7 ft.) AZ200 701
1.0 m (3.3 ft.) AZ200 702
1.5 m (5.0 ft.) AZ200 703
2.0 m (6.6 ft.) AZ200 704
2.5 m (8.2 ft.) AZ200 705
3.0 m (9.9 ft.) AZ200 706
3.5 m (11.5 ft.) AZ200 707
4.0 m (13.1 ft.) AZ200 708
Thermocouple / Electrode assembly
Probe length Part number?
1/4 NPT flowmeter (reference air):?
0.1 to 0.85 l/min (0.21 to 1.8 scfh) STP
AZ200 786
1/4 BSP flowmeter (reference air):?
0.1 to 0.85 l/min (0.21 to 1.8 scfh) STP
AZ200 787
1/4 NPT flowmeter (test gas):?
0.6 to 4.4 l/min (1.27 to 9.32 scfh) STP
AZ200 788
1/4 BSP flowmeter (test gas):?
0.6 to 4.4 l/min (1.27 to 9.32 scfh) STP
AZ200 789
ABB Flowmeters NPT / BSP
ENDURA AZ20 OXYGEN MONITOR COMBUSTION GAS ANALYSIS | DS/AZ20-EN REV. L 19
—
Spares and accessories
Documentation and software
Part number Debion
MI/AZ30M–EN Maintenance Guide
Download* the guide from:?
www.ABB.com/analytical-instruments
*Enter this address in your browser and then type?
IM/AZ20M-EN in the search box –?
the Maintenance Guide is the top b.
AZ20 DTM Software Device Type Manager –?
please contact ABB for details
Probe spares
Part number Debion
Length dependant –?
see page 18 for part?
numbers
Thermocouple / electrode assembly
Length dependant –?
see page 18 for part?
numbers
AZ20 standard heater assembly
AZ20/ZFG2 replacement heater assembly
AZ200 700 Cell assembly –?
includes C-ring and?
commissioning label?
AZ200 727 Restrictor?
upgrade?
kit
AZ200 728 Probe end cap –?
includes wiring labels
AZ20
version
AZ20 / ZFG2
replacement version
AZ200 729 Diffuser assembly –?
includes C-ring
AZ200 730 AutoCal upgrade assembly
Transmitter spares
Part number Debion
AZ200 750
AZ200 751
AZ200 752
AZ20 Transmitter cartridge
? Standard?
? Standard + Analog O/P
? Standard + Digital O/P
AZ200 758 Remote (type 4)
Transmitter backplane
AZ200 757 Integral (type 3)
Transmitter backplane?
Accessories
Part number Debion
AZ200 731
AZ200 732
Coalescing?
filter-regulator?
? 1/4 NPT 5 μm
? 1/4 NPT 5 μm
AZ200 770
AZ200 771
AZ200 772
AZ200 773
ABB reference air pump
? 1/4 BSP (metric)
230 V AC 50 / 60 Hz
? 1/4 BSP (metric)
115 V AC 50 / 60 Hz
? 1/4 NPT (imperial)
230 V AC 50 / 60 Hz
? 1/4 NPT (imperial)
115 V AC 50 / 60 Hz?
AZ200 798
AZ200 799
Probe tool kit*
NPT (AZ20)
BSP (AZ20)
*Included with probe as standard
Application?
dependant – see?
page 18 for part?
numbers
ABB flowmeter
AZ200 785 USB to IrDA adaptor kit
20 ENDURA AZ20 OXYGEN MONITOR COMBUSTION GAS ANALYSIS | DS/AZ20-EN REV. L
—
Ordering inbation
Endura AZ20 probe / transmitter
Tx Probe
AZ20/ X X X X X X X X X X X X X 0 X X STD
Transmitter options
None
Standard
Standard + 2nd analog output
Standard + 2 digital bs / outputs
0
1
2
3
Transmitter entry type
None (no transmitter required)
Metric (M20)
Imperial (NPT)
0
1
2
Transmitter system type
None (no transmitter required)
Integral
Remote
0
1
2
Probe type
None (no probe required)
Standard
0
1
Probe entry type
None (no probe required)
Metric (M20)
Imperial (NPT)
0
1
2
Probe system type
None (no probe required)
Integral
Remote
0
1
2
Automatic calibration
None (no probe required)
No automatic calibration (with flow restrictors)
No automatic calibration (without flow restrictors)
Automatic calibration (with flow restrictors)
Automatic calibration (without flow restrictors)
0
1
2
3
4
Insertion length
None (no probe required)
0.5 m (1.7 ft.)
1.0 m (3.3 ft.)
1.5 m (5.0 ft.)
2.0 m (6.6 ft.)
2.5 m (8.2 ft.)
3.0 m (9.9 ft.)
3.5 m (11.5 ft.)
4.0 m (13.1 ft.)
0
1
2
3
4
5
6
7
8
Continued on next page…
ENDURA AZ20 OXYGEN MONITOR COMBUSTION GAS ANALYSIS
| DS/AZ20-EN REV. L 21
Tx Probe
AZ20/
X
X
X
X
X
X
X
X
X
X
X
X
X
0
X
X STD
See page 20
Flange type
None (no probe required)
ABB standard flange
DIN 65 mm flange
DIN 80 mm flange
DIN 100 mm flange
ANSI 2 in. flange
ANSI 2.5 in. flange
ANSI 3 in. flange
ANSI 4 in. flange
JIS 65 mm flange
JIS 80 mm flange
JIS 100 mm flange
0123456789AB
Thermocouple type
None (no probe required)
Type K
01
Cell options
None (no probe required)
Standard cell
Large surface area filter
014
Cable length
None
5 m (16 ft.)
10 m (33 ft.)
25 m (82 ft.)
50 m (164 ft.)
75 m (246 ft.)
100 m (328 ft.)
0123456
Cable type
None
STD
CSA
012
Reserved
0
Certification option
None
Mcert
cFMus general safety
EAC
0456
Language
English
German
French
Spanish
Italian
EGFSI
22 ENDURA AZ20 OXYGEN MONITOR COMBUSTION GAS ANALYSIS
| DS/AZ20-EN REV. L
—
…Ordering inbation
ZFG2 replacement probe
AZ20/
0
0
0
2
X
2
2
X
X
1
1
X
0
X
X /STD
Transmitter options
None (no transmitter required)
0
Transmitter entry type
None (no transmitter required)
0
Transmitter system type
None (no transmitter required)
0
Probe type
ZFG2 replacement
2
Probe entry type
Metric (M20)
Imperial (NPT)
12
Probe system type
Remote
2
Automatic calibration
No automatic calibration (without flow restrictors)
2
Insertion length
0.5 m (1.7 ft.)
1.0 m (3.3 ft.)
1.5 m (5.0 ft.)
2.0 m (6.6 ft.)
1234
Flange type
None (no probe required)
ABB standard flange
DIN 65 mm flange
DIN 80 mm flange
DIN 100 mm flange
ANSI 2 in. flange
ANSI 2.5 in. flange
ANSI 3 in. flange
ANSI 4 in. flange
JIS 65 mm flange
JIS 80 mm flange
JIS 100 mm flange
0123456789AB
Thermocouple type
Type K
1
Cell options
Standard cell
1
Conduit
None
6 m (20 ft.) conduit for ZFG2 replacement probe
10 m (33 ft.) conduit for ZFG2 replacement probe
078
Reserved
0
Certification option
None
Mcert
04
Language
English
German
French
Spanish
Italian
EGFSI
ENDURA AZ20 OXYGEN MONITOR COMBUSTION GAS ANALYSIS | DS/AZ20-EN REV. L 23
Sales Service Software
—
Trademarks and acknowledgements
HART is a registered trademark of the HART Communication?
Foundation.
DS/AZ20-EN Rev. L 08.2018
—
ABB Limited
Measurement & Analytics
Oldends Lane
Stonehouse
Gloucestershire GL10 3TA
We reserve the right to make technical changes or modify the contents of this document without?
prior notice. With regard to purchase orders, the agreed particulars shall prevail.?
ABB does not accept any responsibility whatsoever for potential errors or possible lack?
of inbation in this document.
We reserve all rights in this document and in the subject matter and illustrations contained therein.?
Any reproduction, disclosure to third parties or utilization of its contents – in whole?
or in parts – is forbidden without prior written consent of ABB.
? 2018 ABB
All rights reserved 3KXA722211R1001
數字輸出模件3664
數字輸出模件3604E
數字輸出模件3625
脈沖輸入模件3511
數字輸入模件3503E
模擬輸出模件3805E
模擬輸入模塊3721
遠程RXM模塊4211
主RXM模塊4210
電源模塊 8312 230VAC
TRICON系統模塊3511
TRICON系統通訊卡TCM4351B
TRICON系統 卡件 DO3625
TRICON系統 卡件DI3503E
TRICON系統卡件MP3008
TRICON系統卡件AO3805E
TRICON系統卡件 AI3721
輸入輸出模塊 SIS卡件 AO連接卡9853-610
SIS卡件 AI連接卡9771-210
SIS卡件 DO連接卡9662-610
SIS卡件 DI連接卡9563-810
SIS卡件 電源卡8312
SIS卡件_電源卡,220VAC型號8312
SIS卡件 DI卡件3503E
SIS卡件_DO卡件,型號3664 RevE6.0
SIS 系統卡件 TRIConEX 3625
AI 3721卡件
SIS卡件DO卡件3664
SIS電源卡件8312
SIS系統卡9563-810
SIS 系統卡件TRIConEX 9563-810
數字量輸入 9563-810
SIS系統卡9662-610
SIS卡件 DO接線底板9662-810
SIS卡件_AI連接卡,型號9771-210
SIS系統卡9853-610
數字量輸出 9853-610
SIS卡件TRIConEX 3625
?SIS卡件TRIConEX 3625
?SIS卡件TRIConEX 3625
SIS系統CPU MP3008
公司主要優勢產品：
【美國，英維思 Invensys FOXBORO IA系統, Triconex ESD系統】
【美國AB ..1756系列,1785系列,1746系列,1747系列,1771系列】
【瑞士ABB.. 機器人 DSQC系列,ABB Advant OCS,ABB Procontic PLC CPU】
【法國施耐德140莫迪康昆騰系列處理器,內存卡,電源模塊等。】
【德國西門子Siemens MOORE,S5,S7,6DD等】
【美國通用電氣GE..IC693/IC697系列】
【美國Westinghouse（西屋）：OVATION系統、WDPF系統、WEStation系統備件】
【德國Bosch Rexroth（博世力士樂）：Indramat，I/O模塊,PLC控制器,驅動模
塊等?！?br />
【美國Motorola（摩托羅拉）：MVME 162、MVME 167、MVME1772、MVME177等系列】?
華銳 數字量擴展模塊 WTDI92;07DI92
華銳 模擬量擴展模塊 WTAI91;07AI91
華銳 主控制器WT97 WT97;07KT97H2
華銳 操作面板 CP502/RS232;接口電纜CAB90
華銳 巴赫曼PLC(塔基) 整套
華銳 PLC-電源模塊 NT255;24VDC/68W
華銳 PLC-中央處理器模塊 MPC240;128MB
華銳 PLC-FAST-BUS擴展模塊 FM211;FAST-BUS
華銳 PLC-數字I/0模塊 DIO216;24VDC/1A
華銳 PLC-溫度記錄模塊 PTAI216;24VDC
華銳 PLC MPLC 240
華銳 PLC控制器 WT97
華銳 PLC控制器 WT98
TRICON系統模塊3511
?
SIS卡件 AO連接卡9853-610
?
SIS卡件 AI連接卡9771-210
SIS卡件 DO連接卡9662-610
SIS卡件 DI連接卡9563-810
SIS卡件 電源卡8312
SIS卡件_電源卡,220VAC型號8312
SIS卡件tricon 8312
SIS卡件 DI卡件3503E
SIS卡件_DO卡件,型號3664 RevE6.0
SIS卡件AI卡件3721
SIS卡件3721
SIS卡件3625
SIS系統卡件3625
SIS 系統卡件 TRIConEX 3625
SIS卡件TRIConEX 3625
DO數字輸出卡3625
SIS系統 DO卡件3625產品
SIS系統卡件3721
SIS系統AI卡3721
SIS卡件TRIConEX 3721
AI 3721卡件
SIS卡件DO卡件3664
SIS系統卡件3721
SIS系統卡件3721
SIS系統卡件3721
SIS系統卡件3721
① 觀察觸摸屏信號指示燈，該燈在正常情況下為有規律的閃爍，大約為每秒鐘閃爍一次，當觸摸屏幕時，信號燈為常亮，停止觸摸后，信號燈恢復閃爍。
② 如果信號燈在沒有觸摸時，仍然處于常亮狀態，首先檢查觸摸屏是否需要清潔;其次檢查硬件所連接的串口號與軟件所設置的串口號是否相符，以及計算機主機的串口是否正常工作。
③ 運行驅動盤中的COMDUMP命令，該命令為DOS下命令，運行時在COMDUMP后面加上空格及串口的代號1或2，并觸摸屏幕，看是否有數據滾出。有數據滾出則硬件連接正常，請檢查軟件的設置是否正確，是否與其他硬件設備發生沖突。如沒有數據滾出則硬件出現故障，具體故障點待定。
④ 運行驅動盤中的SAWDUMP命令，該命令為DOS下命令，運行程序時，該程序?qū)柨刂瓶ǖ念愋汀⑦B接的端口號、傳輸速率，然后程序?qū)目刂瓶ㄖ凶x取相關數據。請注意查看屏幕左下角的X軸的AGC和Y軸的AGC數值，任一軸的數值為 255時，則該軸的換能器出現故障，需進行維修。
⑤ 安裝完驅動程序后進行第一次校正時，注意觀察系統報錯的詳細內容?！?沒有找到控制卡”、“觸摸屏沒有連接”等，根據提示檢查相應的部件。如：觸摸屏信號線是否與控制卡連接牢固，鍵盤取電線是否全部與主機連接等。
⑥ 如仍無法排除，請專業人員維修。
增強型智能通訊模件 4351B V10.5.2
數字輸出模件3664
數字輸出模件3604E
數字輸出模件3625
脈沖輸入模件3511
數字輸入模件3503E
模擬輸出模件3805E
模擬輸入模塊3721
遠程RXM模塊4211
主RXM模塊4210
電源模塊 8312 230VAC
TRICON系統模塊3511
TRICON系統通訊卡TCM4351B
TRICON系統 卡件 DO3625
TRICON系統 卡件DI3503E
TRICON系統卡件MP3008
TRICON系統卡件AO3805E
TRICON系統卡件 AI3721
PLC-中央處理器模塊 MPC240 128MB
PLC-數字I/0模塊 DIO216
擴展模塊FM211
接口模塊 EM203
輸入輸出模塊 DIO280
接口模塊 RS204
模擬量輸入模塊 PTAI216
電源模塊 NT255
數字量輸入/輸出模塊 DIO16-C
背板模塊 BS214
數字輸入模塊 DI232
數字輸出模塊 DO232
Fastbus模塊 FS211/N
主控制器 MPC270
SIS卡件 AO連接卡9853-610
SIS卡件 AI連接卡9771-210
SIS卡件 DO連接卡9662-610
SIS卡件 DI連接卡9563-810
SIS卡件 電源卡8312
SIS卡件_電源卡,220VAC型號8312
SIS卡件tricon 8312
SIS卡件 DI卡件3503E
SIS卡件_DO卡件,型號3664 RevE6.0
SIS卡件AI卡件3721
SIS卡件3721
SIS卡件3625
SIS系統卡件3625
SIS 系統卡件 TRICONEX 3625
SIS卡件TRICONEX 3625
DO數字輸出卡3625
SIS系統 DO卡件3625產品
SIS系統卡件3721
SIS系統AI卡3721
SIS卡件TRICONEX 3721
AI 3721卡件
SIS卡件DO卡件3664
I/O卡件DI3503E
SIS卡件 數字量輸入DI卡 3503E
SIS系統卡件3503E
DI卡件 3503E TRICON
SIS系統卡件8312
SIS卡件電源卡件8312
SIS 系統卡件TRICONEX 8312
電源模件8312
SIS電源卡件8312
SIS系統卡9563-810
SIS 系統卡件TRICONEX 9563-810
數字量輸入 9563-810
SIS卡件_DI連接卡,型號9563-810
SIS系統卡9662-610
SIS卡件 DO接線底板9662-810
SIS卡件9662-610
SIS卡件_AI連接卡,型號9771-210
SIS系統卡9771-210
SIS系統卡9853-610
系統SIS數字量輸出 9853-610
數字量輸出 9853-610
SIS卡件9853-610
SIS系統AI 3721
SIS系統CPU MP3008
三重化處理器3008
I/O卡件AI3721
I/O卡件DO3625
I/O卡件PI3511
通訊卡件TCM4351B
ITCC控制器triconex 4210
AO模件3805E|tricon|INVENSYS
AO模件3805Etricon
ITCC控制器triconex 4211
ITCC控制器triconexMP3008
ITCC系統電源模塊TRICONEX 8312
控制系統配件 SIS擴展機架8111
控制系統配件 SIS 模擬量輸入3721
控制系統配件 ESD 系統3805E
控制系統配件 TRICON 控制系統3604E
控制系統配件TRICON 控制系統3664
控制系統配件 TRICON 控制系統4351B
IS卡件AI卡件3721SIS卡件AI卡件3721 SIS卡件AI卡件3721
模擬量輸出模件3805E
模擬輸入模塊3700A
脈沖輸入模塊3511
TRICONEX 先進通信模塊 4609? ?
TRICONEX 增強的智能通信模塊 4107 4108 4119A 4118
TRICONEX 網絡通信模塊? 4328 4329
TRICONEX 安全管理模塊? 4400 4409?
TRICONEX 遠程模塊 4200 4211
TRICONEX ESD 安全系統模塊? 8306A? 9000 3505E
TRICONEX三重冗余容錯控制模塊
TRICON三重冗余（TMR）模件
網絡通信模件（NCM）?
安全管理模件（SMM）?
高速通道接口模件（HIM） 4508
通信網絡模件/ISA總線?
增強型智能通信模件（EICM）?
增強型智能通訊卡件EICM?
CPU 網絡通訊卡件NCM? 4329
TRICONEX TRICON 8100-8 主機架? ? ?
TRICONEX TRICON 8307A 擴展/RXM機架電源，230VAC? ? ?
TRICONEX TRICON 8101 擴展機架? ? ?
TRICONEX TRICON 8305A 擴展/RXM機架電源，115VAC/DC? ? ?
TRICONEX TRICON 8102 遠程擴展機架? ? ?
TRICONEX TRICON 8306A 擴展/RXM機架電源，24VDC? ? ?
TRICONEX TRICON 8306A I/O總線擴展電纜? ?
TRICONEX TRICON 4400 安全管理模件（SMM）? ? ?
TRICONEX TRICON 9001 I/O通訊總線擴展電纜??
TRICONEX TRICON 4508 高速通道接口模件（HIM）? ? ?
TRICONEX TRICON 8105 I/O空槽板? ? ?
TRICONEX TRICON 8306A 擴展/RXM機架電源，24VDC? ? ?
TRICONEX TRICON 8106 空端子槽板? ? ?
TRICONEX TRICON 4328 網絡通信模件（NCM）? ??
TRICONEX TRICON 8302A 主機架電源，230VAC? ? ?
TRICONEX TRICON 4400 安全管理模件（SMM）? ?
TRICONEX TRICON 8300A 主機架電源，115VAC/DC? ??
TRICONEX TRICON 4508 高速通道接口模件（HIM）? ??
TRICONEX TRICON 8301A 主機架電源，24VDC? ??
TRICONEX TRICON 7518-1 通信網絡模件/ISA總線? ??
TRICONEX TRICON 8310 控制系統電源120VAC/VDC? ??
TRICONEX TRICON 4108 增強型智能通信模件（EICM）非隔離型? ??
TRICONEX TRICON 8311 控制系統電源24VDC? ??
TRICONEX TRICON 4118 增強型智能通信模件（EICM）隔離型? ??
TRICONEX TRICON 8312 控制系統電源230VAC? ? ?
TRICONEX TRICON 4119 增強型智能通訊卡件EICM? ??
TRICONEX TRICON 3006 CPU? ??
TRICONEX TRICON 4329 網絡通訊卡件NCM? ??
TRICONEX TRICON 3007 CPU與Honeywell(UCN)通訊??
TRICONEX TRICON 4409 SMM? ??
TRICONEX TRICON 3008 CPU與Foxboro(DCS)通訊
TRICONEX TRICON 4609 ACM? ??
TRICONEX TRICON 3004 增強型TRICONZ主處理器II，SOE，1MSRAM??
? ?
TRICONEX TRICON 4108 增強型智能通信模件（EICM）非隔離型? ??
TRICONEX TRICON 3005 增強型TRICONZ主處理器II，SOE，2MSRAM??
??
TRICONEX TRICON 4118 增強型智能通信模件（EICM）隔離型? ??
TRICONEX TRICON 4351A COMMUNICATION MODULE TCM?
TRICONEX TRICON 4351B
TRICONEX TRICON 3501E 數字輸入模件，隔離、非公用115VAC/DC?
TMR 32點
TRICONEX TRICON 3531E 數字輸入模件，非公用，簡易型
115VAC/DC 32點
TRICONEX TRICON 3502E 數字輸入模件，8組公用、自測48VAC/DC?
TMR 32點
TRICONEX TRICON 3532E 數字輸入模件，非公用，簡易型
48VAC/DC 32點? ? ?
?TRICONEX TRICON 3503E 數字輸入模件，8組
公用，自測24VAC/DC TMR 32點
TRICONEX TRICON 3533E 數字輸入
模件，非公用，簡易型24VAC/DC 32點? ? ??
TRICONEX TRICON?
3504E 數字輸入模件，高密度DC耦合24VAC/48VDC TMR 64點
TRICONEX TRICON 3505E 數字輸入模件，低限，自測24VDC TMR??
32點
TRICONEX TRICON 3510? 數字輸入模件，非公用DC耦合，脈沖輸入
TMR? 8點? ? ?
TRICONEX TRICON 3601E 數字輸出模件，光隔離、非公用115VAC?
TMR 16點TRICONEX TRICON 3603E 數字輸出模件，光隔離、非公用
120VDC TMR 16點遠程機架8112
擴展機架8111
主機架8110
控制器3008
電源模塊8312
遠程擴展卡4210
模擬量輸入模塊3700A
模擬量輸入模件3721
模擬量輸出模塊3805E
通訊模件4351B
通訊模塊4351A
開關量輸入模塊3503E
開關量輸出模塊3604E
通訊模塊4119A
遠程擴展卡4210
遠程擴展卡4211
開關量輸入端子板9563－810
開關量輸出端子板9662－810
模擬量輸入端子板9771－210
I/O電纜9000
ELCO電纜DI－4000093－310
ELCO電纜DI－4000093－326
ELCO電纜DO－4000094－327
ELCO電纜AI－4000103－513
ELCO電纜AI－4000103－520
ELCO電纜AO－4000098－510
空槽板8105
主處理器\5101\TRICONEX\SIS/CCS（套件）
模擬量輸入模塊\5351\TRICONEX\SIS/CCS（套件）
模擬量輸出模塊\5481\TRICONEX\SIS/CCS（套件）
開關量輸入模塊\5301\TRICONEX\SIS/CCS（套件）
開關量輸出模塊\5401\TRICONEX\SIS/CCS（套件）
擴展模塊\2281\TRICONEX\SIS/CCS（套件）
脈沖量輸入模塊（套件）5381
通信模塊（套件）5201
系統組態軟件7254_9
SOE記錄軟件7254_4
增強型診斷監視軟件7260_5
高能鋰電池3.6VSIZE C
光纖分配箱24口，單模，ST
Trident 主處理器3101
Trident 通信模塊3201
Trident 模擬量輸入模塊3351
Trident 模擬量輸出模塊3481
Trident 開關量輸入模塊3301
Trident 開關量輸出模塊3401
Trident 脈沖量輸入模塊3381
Trident 擴展模塊2281
Trident 主處理器底板2101
Trident 模擬量輸入模塊底板2351
Trident 模擬量輸出模塊底板2481
Trident 開關量輸入模塊底板2301
Trident 開關量輸出模塊底板2401
Trident 脈沖量輸入模塊底板2381
擴展機架8111TRICON/Trident品牌產品的描述及型號：
遠程機架8112
擴展機架8111
主機架8110
控制器3008
電源模塊8312
遠程擴展卡4210
模擬量輸入模塊3700A
模擬量輸入模件3721
模擬量輸出模塊3805E
通訊模件4351B
通訊模塊4351A
開關量輸入模塊3503E
開關量輸出模塊3604E
通訊模塊4119A
遠程擴展卡4210
遠程擴展卡4211
開關量輸入端子板9563－810
開關量輸出端子板9662－810
模擬量輸入端子板9771－210
I/O電纜9000
ELCO電纜DI－4000093－310
ELCO電纜DI－4000093－326
ELCO電纜DO－4000094－327
ELCO電纜AI－4000103－513
ELCO電纜AI－4000103－520
ELCO電纜AO－4000098－510
空槽板8105
主處理器\5101\TRICONEX\SIS/CCS（套件）
模擬量輸入模塊\5351\TRICONEX\SIS/CCS（套件）
模擬量輸出模塊\5481\TRICONEX\SIS/CCS（套件）
開關量輸入模塊\5301\TRICONEX\SIS/CCS（套件）
開關量輸出模塊\5401\TRICONEX\SIS/CCS（套件）
擴展模塊\2281\TRICONEX\SIS/CCS（套件）
脈沖量輸入模塊（套件）5381
通信模塊（套件）5201
系統組態軟件7254_9
SOE記錄軟件7254_4
增強型診斷監視軟件7260_5
高能鋰電池3.6VSIZE C
光纖分配箱24口，單模，ST
Trident 主處理器3101
Trident 通信模塊3201
Trident 模擬量輸入模塊3351
Trident 模擬量輸出模塊3481
Trident 開關量輸入模塊3301
Trident 開關量輸出模塊3401
Trident 脈沖量輸入模塊3381
Trident 擴展模塊2281
Trident 主處理器底板2101
Trident 模擬量輸入模塊底板2351
Trident 模擬量輸出模塊底板2481
Trident 開關量輸入模塊底板2301
Trident 開關量輸出模塊底板2401
Trident 脈沖量輸入模塊底板2381
擴展機架8111
主機架8110
ControlLogix在簡單易于使用的環境下，實現了卓越的性能，堪稱業內典范。ControlLogix控制器zui大存儲容量可達8兆，支持過程密集型的應用和快速運動控制應用?？梢愿鶕?jù)應用要求，選用不同存儲容量的控制器。ComPACtFlash卡可做程序的移動存儲。多種處理器、多種通訊模塊和I/O可以混合使用，不受限制。不需要處理器執行I/O的橋接和路由，隨著系統的增大，可用網絡把控制分布到另外的機架。 優點：
適合順序、過程、傳動和運動控制的模塊化、高性能控制平臺：每個ControlLogix處理器可以執行多個控制任務，減少所需要的控制器個數，這樣，排錯更快?？梢苑謩e觸發多個周期任務以便達到更高的性能水平。
不加限制地混合多個處理器、網絡和I/O：ControlLogix平臺的高性能，一部分源于作為快速NetLinx網絡操作的ControlLogix背板。ControlLogix處理器，I/O和通訊模塊就象網絡上的智能節點。
通用的編程環境和Logix控制引擎：無論選用的平臺和網絡，通過使用通用的控制模型，都可以降低系統成本，簡化集成。組態和編程是一致的，這樣，不論開始的程序開發還是長遠的系統維護，都可以少花力氣。
連接到NetLinx開放式網絡結構: 在全廠范圍內，從車間到管理層，從互連網到電子化制造應用，信息全部無縫通訊。
I/O模塊種類繁多：模擬量、數字量和專用I/O模塊滿足應用要求。
增強型智能通訊模件 4351B
數字輸出模件3664
數字輸出模件3604E
數字輸出模件3625
脈沖輸入模件3511
數字輸入模件3503E
模擬輸出模件3805E
模擬輸入模塊3721
遠程RXM模塊4211
主RXM模塊4210
電源模塊 8312 230VAC
TRICON系統模塊3511
TRICON系統通訊卡TCM4351B
TRICON系統 卡件 DO3625
TRICON系統 卡件DI3503E
TRICON系統卡件MP3008
TRICON系統卡件AO3805E
TRICON系統卡件 AI3721
PLC-中央處理器模塊 MPC240 128MB
PLC-數字I/0模塊 DIO216
擴展模塊FM211
接口模塊 EM203
輸入輸出模塊 DIO280
接口模塊 RS204
模擬量輸入模塊 PTAI216
電源模塊 NT255
數字量輸入/輸出模塊 DIO16-C
背板模塊 BS214
數字輸入模塊 DI232
數字輸出模塊 DO232
Fastbus模塊 FS211/N
主控制器 MPC270
SIS卡件 AO連接卡9853-610
SIS卡件 AI連接卡9771-210
SIS卡件 DO連接卡9662-610
SIS卡件 DI連接卡9563-810
SIS卡件 電源卡8312
SIS卡件_電源卡,220VAC型號8312
SIS卡件tricon 8312
SIS卡件 DI卡件3503E
SIS卡件_DO卡件,型號3664 RevE6.0
SIS卡件AI卡件3721
SIS卡件3721
SIS卡件3625
SIS系統卡件3625
SIS 系統卡件 TRICONEX 3625
SIS卡件TRICONEX 3625
DO數字輸出卡3625
SIS系統 DO卡件3625產品
SIS系統卡件3721
SIS系統AI卡3721
SIS卡件TRICONEX 3721
AI 3721卡件
SIS卡件DO卡件3664
I/O卡件DI3503E
SIS卡件 數字量輸入DI卡 3503E
SIS系統卡件3503E
DI卡件 3503E TRICON
SIS系統卡件8312
SIS卡件電源卡件8312
SIS 系統卡件TRICONEX 8312
電源模件8312
SIS電源卡件8312
SIS系統卡9563-810
SIS 系統卡件TRICONEX 9563-810
數字量輸入 9563-810
SIS卡件_DI連接卡,型號9563-810
SIS系統卡9662-610
SIS卡件 DO接線底板9662-810
SIS卡件9662-610
SIS卡件_AI連接卡,型號9771-210
SIS系統卡9771-210
SIS系統卡9853-610
系統SIS數字量輸出 9853-610
數字量輸出 9853-610
SIS卡件9853-610
SIS系統AI 3721
SIS系統CPU MP3008
三重化處理器3008
I/O卡件AI3721
I/O卡件DO3625
I/O卡件PI3511
通訊卡件TCM4351B
ITCC控制器triconex 4210
AO模件3805E|tricon|INVENSYS
AO模件3805Etricon
ITCC控制器triconex 4211
ITCC控制器triconexMP3008
ITCC系統電源模塊TRICONEX 8312
控制系統配件 SIS擴展機架8111
控制系統配件 SIS 模擬量輸入3721
控制系統配件 ESD 系統3805E
控制系統配件 TRICON 控制系統3604E
控制系統配件TRICON 控制系統3664
控制系統配件 TRICON 控制系統4351B
控制系統配件 TS3000 ETP 9761-210
控制系統配件 ESD 系統SIS數字量輸入 9563-810
控制系統配件 ESD 系統SIS數字量輸出 9853-610
控制系統配件 ESD 系統數字量輸出 9662-110
3805E模擬輸出模件
3805E模擬輸出模件
3805E模擬輸出模件
3805E模擬輸出模件
ControlLogix控制系統以微處理器為核心，把先進的控制技術、通訊技術、計算機技術、CRT技術與現場儀表有機地結合起來，實現對生產過程的集中監視、集中操作和分散控制，為生產提供了強有力的保證。由于該系統的內存量、控制器個數和網絡類型可以根據具體應用來選擇，所以相對于其他可編程控制系統而言，其結構更加靈活，使用更為方便。
Logix5550(控制器)?ControlLogix系統的核心是Logix5550控制器，其處理速度為0.08 ms/K指令，標準內存配置為160 kB，可擴展至2 MB，一個Logix5550控制器支持12 800個離散的或4 000個模擬的I/O點，符合IEC1131-1的操作系統提供多任務環境，***多可支持32個任務，其中31個時間片可由用戶設定，支持長文件、變量名[1]。Logix5550以微處理器為核心，采用了先進的過程控制技術、通訊技術、計算機技術，負責對生產過程進行檢測和控制，是數據采集、過程控制部分。通過組態和編程，具有豐富的運動控制功能、順序控制功能、傳動及過程控制功能、運算功能，可直接采集來自現場的各類工藝過程數據，經處理、運算后，將檢測信號送至操作站進行監視，將控制信號送至現場。具有可靠性高，掃描處理速率高等特點，并具有自診斷功能。
RSView32是操作人員和ControlLogix系統的人機接口，能夠?qū)Υ蠓秶纳a(chǎn)過程進行監視和操作，同時，還能夠?qū)κ占降男畔⒓庸ぬ幚砗捅４?，對工藝參?shù)進行實時顯示和報警，實現對生產的集中監視、集中操作、集中顯示、集中處理，具有數據處理、歷史數據保存、報警顯示及打印、報表生成、多種顯示及對控制 回路實施操作等功能，方便對生產的控制和管理。
主機架?是控制站的核心部分，主要由控制器(Logix5550)、電源模塊、通訊模塊(CNBR)、輸入/輸出模塊等組成。
增強型智能通訊模件 4351B V10.5.2
數字輸出模件3664
數字輸出模件3604E
數字輸出模件3625
脈沖輸入模件3511
數字輸入模件3503E
模擬輸出模件3805E
模擬輸入模塊3721
遠程RXM模塊4211
主RXM模塊4210
電源模塊 8312 230VAC
TRICON系統模塊3511
TRICON系統通訊卡TCM4351B
TRICON系統 卡件 DO3625
TRICON系統 卡件DI3503E
TRICON系統卡件MP3008
TRICON系統卡件AO3805E
TRICON系統卡件 AI3721
PLC-中央處理器模塊 MPC240 128MB
PLC-數字I/0模塊 DIO216
擴展模塊FM211
接口模塊 EM203
輸入輸出模塊 DIO280
接口模塊 RS204
模擬量輸入模塊 PTAI216
電源模塊 NT255
數字量輸入/輸出模塊 DIO16-C
背板模塊 BS214
數字輸入模塊 DI232
數字輸出模塊 DO232
Fastbus模塊 FS211/N
主控制器 MPC270
SIS卡件 AO連接卡9853-610
SIS卡件 AI連接卡9771-210
SIS卡件 DO連接卡9662-610
SIS卡件 DI連接卡9563-810
SIS卡件 電源卡8312
SIS卡件_電源卡,220VAC型號8312
SIS卡件tricon 8312
SIS卡件 DI卡件3503E
SIS卡件_DO卡件,型號3664 RevE6.0
SIS卡件AI卡件3721
SIS卡件3721
SIS卡件3625
SIS系統卡件3625
SIS 系統卡件 TRICONEX 3625
SIS卡件TRICONEX 3625
DO數字輸出卡3625
SIS系統 DO卡件3625產品
SIS系統卡件3721
SIS系統AI卡3721
SIS卡件TRICONEX 3721
AI 3721卡件
SIS卡件DO卡件3664
I/O卡件DI3503E
SIS卡件 數字量輸入DI卡 3503E
SIS系統卡件3503E
DI卡件 3503E TRICON
SIS系統卡件8312
SIS卡件電源卡件8312
SIS 系統卡件TRICONEX 8312
電源模件8312
SIS電源卡件8312
SIS系統卡9563-810
SIS 系統卡件TRICONEX 9563-810
數字量輸入 9563-810
SIS卡件_DI連接卡,型號9563-810
SIS系統卡9662-610
SIS卡件 DO接線底板9662-810
SIS卡件9662-610
SIS卡件_AI連接卡,型號9771-210
SIS系統卡9771-210
SIS系統卡9853-610
系統SIS數字量輸出 9853-610
數字量輸出 9853-610
SIS卡件9853-610
SIS系統AI 3721
SIS系統CPU MP3008
三重化處理器3008
I/O卡件AI3721
I/O卡件DO3625
I/O卡件PI3511
通訊卡件TCM4351B
ITCC控制器triconex 4210
AO模件3805E|tricon|INVENSYS
AO模件3805Etricon
ITCC控制器triconex 4211
ITCC控制器triconexMP3008
ITCC系統電源模塊TRICONEX 8312
控制系統配件 SIS擴展機架8111
控制系統配件 SIS 模擬量輸入3721
控制系統配件 ESD 系統3805E
控制系統配件 TRICON 控制系統3604E
控制系統配件TRICON 控制系統3664
控制系統配件 TRICON 控制系統4351B
控制系統配件 TS3000 ETP 9761-210
Invensys英維思Triconex系統規格技術參數：
康吉森triconex三重冗余SIS系統
康吉森triconex ITCC機組控制系統
遠程機架Triconex 8112
擴展機架Triconex 8111
主機架Triconex 8110
控制器Triconex 3008
電源模塊Triconex 8312
