The Gripping Clamp’s function is dictated by the type of Jaw Set that is inserted into the Clamp. The Gripping Clamp can hold the conduit in place allowing no lateral movement or the gripping clamp can be used as a “halo” and the conduit can move laterally. All of the Jaw Sets rotate radially 360° inside the Gripping Clamp.
Ball Joint Jaws
Ball Joint Jaws have a recessed elliptical channel that is designed to accept the radius profile for a Conduit Protectors. once the Protector is seated inside the Ball Joint Jaw the conduit now has plus or minus 15° of mobility inside the Gripping Clamp Assembly.* All of the REIKU Jaw sets (except Comb Jaws) rotate in an orbital/radial direction inside the Gripping Clamp in order to prevent/ remove torsion load.
Part No.球形鉗夾
Quantity
PAKGB-36
1
PAKGB-52
1
POKGB-70
1
德國REIKU機器人管線包組合內(nèi)夾（Comb Jaws）REIKU Sliding Jaws / REIKU Sliding Jaws/REIKU Ball Joint Jaws/REIKU Comb Jaws REIKU代理商：上海頤品自動化科技有限公司 關鍵詞：REIKU尼龍軟管，REIKU機器人尼龍軟管，德國REIKU-PA12尼龍軟管REIKU尼龍軟管接頭，REIKU尼龍軟管固定座，REIKU防撞塊，REIKU星型分線頭REIKU尼龍軟管，REIKU編織網(wǎng)管，REIKU機器人軟管，REIKU管夾支架，REIKU防撞塊，REIKU尼龍軟管接頭，REIKU尼龍固定座，REIKU尼龍軟管REIKU法蘭盤，REIKU分線頭，REIKU中間內(nèi)夾，REIKU直通接頭和內(nèi)夾 Comb Jaws are available for 70mm conduit size only. The Comb Jaw set is used at the termination point when a custom Cablestar grommet is not being used. The Comb Jaw has “teeth” that enable the use of a wire/cable tie to secure the cables or hoses against lateral movement once they exit the conduit. The Comb Jaw is the only Jaw Set that does not move radially inside the Gripping Clamp as instead held against any orbital rotation so that the cable ties do not put pressure or cut into the cables or hoses
End Jaws are available for 70mm conduit size only. The End Jaw set is used at the termination point when a custom Cablestar grommet is not being used. The End Jaw set is profiled on one side with a smooth radius edge that is designed to provide a nice surface for the cables and hoses to rub against after they exit the conduit.
