| 詳細參數(shù) | |||
|---|---|---|---|
| 品牌 | 西門子 | 型號 | 6ES7288-3AQ02-0AA0 |
| 結(jié)構(gòu)形式 | 模塊式 | 安裝方式 | 現(xiàn)場安裝 |
| LD指令處理器 | 軟PLC | 加工定制 | 否 |
西門子EMDR16模塊8x24VDC輸入/輸出
西門子EMDR16模塊8x24VDC輸入/輸出
Various interface nodes are available for the SIPLUS CMS4000:
The SIPLUS CMS X?Tools analysis software must be ordered separaby, see "Analysis Software" → "CMS X?Tools".
Cables, mounting sets and the IFN coping set for setting up a SIPLUS CMS4000 condition monitoring system, see "Accessories" → "Cables and mounting parts".
|
SIPLUS CMS 硬件 "IFN VIB-A；" “模擬信號記錄；" "振動記錄 6*IEPE；" 用于振動加速度 "測量；UB=24V DC；IP67"
|
The IFN VIB-ACC (vibration acceleration) is a robust interface node for SIPLUS CSM4000:
The IFN VIB-ACC is a rugged interface node for SIPLUS CMS4000, designed for detecting mechanical vibrations in the frequency range from 0.1 Hz to 40 kHz.
The IFN VIB-ACC is used for high-accuracy continuous monitoring in harsh environments.
The IFN VIB-ACC has at its front:
Connection to the higher-level buation PC is via an IEEE1394 bus system operating at 400 Mbit/s.
The module can be mounted on an IEC rail or attached using a mounting set (mounting set see "Accessories" → "Cables and mounting parts").
With the IFN VIB-ACC it is possible to record
The maximum sampling frequency is 192 kHz per channel.
|
Article number |
6AT8000-1BB00-4XA0 |
|
|---|---|---|
|
|
SIPLUS CMS4000 Interface Node VIB-A |
|
|
General inbation |
|
|
|
Product type designation |
IFN VIB-ACC |
|
|
Product debion |
six IEPE sensor signals or five IEPE sensor signals and one analog b signal (e.g. for speed) are measured with the IFN VIB-A |
|
|
Installation type/mounting |
|
|
|
Mounting type |
standard rail |
|
|
Mounting accessories |
Mounting bracket, can be ordered as option |
|
|
Required bance |
|
|
|
80 mm |
|
|
25 mm |
|
|
25 mm |
|
|
Supply voltage |
|
|
|
Design of the power supply |
stabilized |
|
|
Rated value (DC) |
24 V |
|
|
permissible range, lower limit (DC) |
19.2 V |
|
|
permissible range, upper limit (DC) |
32 V |
|
|
Reverse polarity protection |
Yes |
|
|
Overvoltage protection |
Yes; max. 35 V |
|
|
Input current |
|
|
|
from external supply (24 V DC), max. |
0.2 A |
|
|
Power |
|
|
|
Active power b, max. |
4.8 W |
|
|
Analog bs |
|
|
|
Number of analog bs |
1 |
|
|
Designation of the analog b |
CH6 |
|
|
Electrical b frequency, min. |
0 Hz |
|
|
Electrical b frequency, max. |
1 kHz |
|
|
Overvoltage strength, min. |
-60 V |
|
|
Overvoltage strength, max. |
60 V |
|
|
Open-circuit detection |
No |
|
|
Short-circuit detection |
No |
|
|
Input ranges |
|
|
|
Yes |
|
|
Input ranges (rated values), voltages |
|
|
|
-30 V |
|
|
30 V |
|
|
Input ranges (rated values), currents |
|
|
|
0.012 mA |
|
|
Sensor b |
|
|
|
Number of sensor bs |
6 |
|
|
Designation of the sensor bs |
CH1 ... CH6 |
|
|
Design of the sensor |
IEPE |
|
|
Sampling frequency, max. |
192 kHz |
|
|
Parameterizable down sampling frequencies |
0.014 / 0,33 / 4 / 8 / 16 / 24 / 48 / 64 / 96 kHz |
|
|
Overvoltage strength, min. |
-60 V |
|
|
Overvoltage strength, max. |
60 V |
|
|
Open-circuit detection |
Yes |
|
|
Short-circuit detection |
Yes |
|
|
Analog value generation for the bs |
|
|
|
Parameterizable down sampling frequencies |
4 / 8 / 16 / 24 / 48 / 64 / 96 kHz |
|
|
Sampling frequency, max. |
192 kHz |
|
|
Integration and conversion time/resolution per channel |
|
|
|
16 bit |
|
|
Encoder |
|
|
|
Encoder signals, IEPE |
|
|
|
0.1 Hz |
|
|
40 kHz |
|
|
Errors/accuracies |
|
|
|
Relative measuring accuracy for analog b signals, min. |
-1 % |
|
|
Relative measuring accuracy for analog b signals, max. |
1 % |
|
|
Relative measuring accuracy for IEPE signals, min. |
-0.7 % |
|
|
Relative measuring accuracy for IEPE signals, max. |
0.7 % |
|
|
Crosstalk attenuation between analog b signals at 1 kHz |
-78 dB |
|
|
Crosstalk attenuation between sensor channels CH 1 and CH 2 at 1 kHz |
-69 dB |
|
|
Crosstalk attenuation between sensor channels CH 3 ... CH 6 at 1 kHz |
-73 dB |
|
|
Signal-to-noise ratio for analog b signals |
-69 dB |
|
|
Signal-to-noise ratio between sensor channels CH 1 and CH 2 for IEPE signals |
-57 dB |
|
|
Signal-to-noise ratio between sensor channels CH 3 ... CH 6 for IEPE signals |
-70 dB |
|
|
Interfaces |
|
|
|
Number of interfaces |
3 |
|
|
Design of plug-in connection |
Connector plug 8-pole (M12) |
|
|
Transmission rate, max. |
400 Mbit/s |
|
|
Protocols |
|
|
|
Bus protocol/transmission protocol |
IEEE 1394a/b |
|
|
Potential separation |
|
|
|
Potential separation analog bs |
|
|
|
No |
|
|
Galvanic isolation at sensor b |
|
|
|
No |
|
|
Degree and class of protection |
|
|
|
IP degree of protection |
IP67 |
|
|
Standards, approvals, certificates |
|
|
|
Certificate of suitability |
CE |
|
|
CE mark |
Yes |
|
|
KC approval |
Yes |
|
|
China RoHS compliance |
Yes |
|
|
Use in hazardous areas |
|
|
|
Yes |
|
|
Yes |
|
|
Ambient conditions |
|
|
|
Ambient temperature during operation |
|
|
|
-40 °C |
|
|
65 °C |
|
|
Ambient temperature during storage/transportation |
|
|
|
-40 °C |
|
|
85 °C |
|
|
-40 °C |
|
|
85 °C |
|
|
Connection b |
|
|
|
Design of electrical connection for supply voltage |
Male connector 5-pole (M12) |
|
|
Design of electrical connection at b |
Connector plug 5-pole (M12) |
|
|
Design of electrical connection for the PE conductor |
M4 screw with contact washer |
|
|
2.5 mm2 |
|
|
Mechanics/material |
|
|
|
Material of housing |
aluminum |
|
|
Dimensions |
|
|
|
Width |
86 mm |
|
|
Height |
210 mm |
|
|
Depth |
87 mm |
|
|
Depth when mounted on DIN rail |
96 mm |
|
|
Weights |
|
|
|
Weight (without packaging) |
1.24 kg |
|
西門子EMDR16模塊8x24VDC輸入/輸出
