| 詳細(xì)參數(shù) | |||
|---|---|---|---|
| 品牌 | 佳盛偉 | 型號 | jsw615 |
| 基材 | 聚脂 | 加工定制 | 是 |
| 顏色 | 白色 | 是否雙面膠帶 | 否 |
| 特點 | 耐高溫 | 撕斷方式 | 其他 |
| 適用范圍 | 五金,塑膠 | 長期耐溫性 | 180-240 |
| 純?nèi)夂?/span> | 其他 | 寬度 | 其他 |
| 產(chǎn)地 | 東莞 | ||
Thermo-Bond Film 615，F(xiàn)lexible, light-colored, thermoplastic adhesive bonding film that exhibits good adhesion to a variety of substrates. The bonding film is removable from the release coated paper carrier. Available with 2.5 mil or 4.0 mil adhesive layer.
Thermo-Bond Film 615，Oops, no products have been added to this category yet.Equivalment To TThermo-Bond Film 615hermal Hot Melt Adhesive Bonding Film Tape For Metal Bonding，If you’re not seeing your recently viewed products keep in mind your browser or device settings could affect this.
Precautions for JSW-JSW Thermo-Bond Film 615: it may cause skin allergic reb. If touching the skin, please wash it with warm water. If touching the eyes, you must wash it with b water.JSW Thermo-Bond Film 615 shall be put into use within 3 minutes after unsealing. Wear protective gloves and glasses during operation to avoid inhalation of vapor and mist. If it is not used for designated purposes, it is forbidden to discharge it into the environment, and dispose of the product or container according to local and national regulations. JSW Thermo-Bond Film 615 fire extinguishing b: general applicable fire extinguishing agent. Please ask the manufacturer or seller for the safety data sheet of JSW Thermo-Bond Film 615.
The b uses JSW Thermo-Bond Film 615 as the adhesive, which should have the maximum wetted area and measure the roughness of the solid. When the surface roughness increases, the wetting process can be spontaneous. The wetting kinetics and speed of JSW Thermo-Bond Film 615 are related to the surface structure, viscosity and surface tension of the adhesive. Because the surface tension of organic solid is not very different, the soaking time of JSW Thermo-Bond Film 615 mainly depends on the viscosity and contact angle of hot melt liquid. It can be seen from the above that the lower the viscosity of hot-melt liquid is, the shorter the soaking time of JSW Thermo-Bond Film 615 is, the more the gap on the surface will be fully soaked; the smaller the soaking time is, the faster the soaking speed is. The best condition of bonding surface chemistry when the adhesion work of JSW Thermo-Bond Film 615 to the surface is the largest or the interface energy is the lowest, the bonding strength is the best. This is the best condition of bonding surface chemistry.
Assembly production is a special case ofJSW Thermo-Bond Film 615 used in digital production. That is to say, the final products of narrow frame and acrylic lens are assembled by dispensing process, so that the finished products are lighter and thinner, and the ultra narrow parts are assembled. JSW Thermo-Bond Film 615 is often the optional products of assembly manufacturers. And it's a unique adhesive product at present. JSW company produces it on schedule and then transports it to the mainland market. When the market needs, it can sendJSW Thermo-Bond Film 615 to customers. The structure of general mobile phone products is complex, and the frame of general parts is narrow. In the process of product design, the effect ofJSW Thermo-Bond Film 615 is obvious to all because the adhesive tape can not meet the requirements of rapid assembly. Facing more and more digital products enterprises, let the future handheld industry move towards the era of popularity.
