| 詳細參數 | |||
|---|---|---|---|
| 品牌 | foxboro | 型號 | P0922YUFPS400-24 |
| 結構形式 | 模塊式 | 安裝方式 | 控制室安裝 |
| LD指令處理器 | 硬PLC | 功能 | 電源模塊 |
| 工作電壓 | 24VDC | 輸出頻率 | 50/60Hz |
| 產品認證 | CE | 環境溫度 | 0至,60°C |
| 環境濕度 | 5至95%,非冷凝 | 加工定制 | 否 |
| 重量 | 6.80磅 | 產地 | 美國 |
| 外形尺寸 | 10.50x8.50x6.50 | ||
FOXBORO P0922YU FPS400-24
描述：
P0922YU
福克斯波羅
(FPS400-24)
電源供應
輸入：100-240VAC
輸出：24VDC
50/60Hz
DIN 導軌安裝
P0922YU FPS400-24自控飛鋸實驗板的板的輸入輸出端子為特殊設計的端子，其功能為，當輸出端M1為ON時，BV自動產生脈沖信號，模擬測量電動機轉速的光碼盤信號。當SQ1給出信號(發光管亮)表示允許飛鋸切割鋼管，SQS發光管亮表示飛鋸完成了鋼管的切割，飛鋸抬起。SQ2發光管亮表示鋼管的夾具可松夾，SQ3發光管亮表示小車可返回，液壓閥SYA作用(發光管亮)使小車返回。SQ4亮表示小車沒有返回，系統出現故障給出報警信號，即對應的報警發光管亮，整個系統出現停止狀態。故障排除后，重新啟動系統時，P0922YU FPS400-24必須先按復位按鈕，使電路從鎖住狀態恢復恢復正常狀態。電磁閥4YA發光亮表示夾具緊鋼管，3YA發光管亮表示夾具松夾，電磁閥lYA發光管亮表示下鋸，2YA發光管亮表示飛鋸抬起。電動機M1發光管亮表示送入鋼管，電動機M2發光管亮表示飛鋸旋轉運行。
The b and output terminals of p0922yu fps400-24 automatic control flying saw test board are specially designed terminals. Its function is that when the output terminal M1 is on, BV automatically generates pulse signal to simulate the optical code disk signal for measuring motor speed. When SQ1 gives a signal (the light emitting tube is on), it indicates that the flying saw is allowed to cut the steel pipe. When SQS light emitting tube is on, it indicates that the flying saw has finished cutting the steel pipe and the flying saw is lifted. When SQ2 light-emitting tube is on, it indicates that the clamp of steel pipe can be loosened, when SQ3 light-emitting tube is on, it indicates that the trolley can return, and the b of hydraulic valve sya (light-emitting tube is on) makes the trolley return. Sq4 on indicates that the trolley does not return, and the system gives an alarm signal in case of failure, that is, the corresponding alarm LED is on, and the whole system is stopped.
After troubleshooting, when restarting the system, p0922yu fps400-24# must first press the reset button to restore the circuit from the locked state to the normal state. When the solenoid valve 4ya lights up, it means the clamp is tight, the 3YA light-emitting tube lights up, it means the clamp is loose, the solenoid valve lya light-emitting tube lights up, it means the lower saw, and the 2ya light-emitting tube lights up, it means the flying saw is lifted. When the light emitting tube of motor M1 is on, it indicates that the steel pipe is fed, and when the light emitting tube of motor M2 is on, it indicates that the flying saw rotates.
關于我們公司：
我們提供一流的服務
我們提供多樣化的零件
我們實現更快的速度
秉承卓越的企業理念，我們致力于做得更好，
無論是零件、服務還是交付效率。
為 265個國家的 5,196,226 位客戶提供了 87,928,896 個零件
未根據您的搜索條件找到任何產品
如果您找不到所需的產品，請隨時與我們聯系。
