| 詳細參數 | |||
|---|---|---|---|
| 品牌 | 其他 | 型號 | PMC422FP |
| 結構形式 | 模塊式 | 安裝方式 | 控制室安裝 |
| LD指令處理器 | 硬PLC | 功能 | 串行控制器 |
| 工作電壓 | 電源組24VDC | 輸出頻率 | 10/100Mbps |
| 處理速度 | 50MHz | 產品認證 | CQ |
| 環境溫度 | 0°Cto,60°C | 環境濕度 | 95%,非冷凝 |
| 加工定制 | 否 | ||
PMC522/FP 為將串行 I/O 要求集成到 VMEbus 或 CompactPCI 系統中提供了獨特的有效解決方案。PMC522/FP 在單個 PMC 卡上實現，與當前一代 VMEbus 和 CPCI 單板計算機以及任何包含 PMC 連接器的專用處理器完全兼容。
八個通用 RS232/RS-422/RS-485（半雙工）輸入讀/寫突發操作，以字節、字和雙字傳輸數據，八個端口使用 68 針高密度連接器路由到前面或八個端口通過 P14 路由到后面PMC/PCI 外。此外，PMC422和PMC422/FP具有16位通用定時器/計數器，具有8個通用計數器投入。8位可通過板載開關設置，并由主機讀取?？偣灿?56種組合可供選擇可能的。根據VITA標準VITA 36-199X，配備2個PIM（PMC I/O模塊）PIM422設計用于在與RAMiX的PMC421、PMC422或PMC422配合使用時提供后部訪問I/OPMC423。動力傳動系接口模塊與后過渡模塊匹配（參見第5節中的裝配圖），后者已按照PIM標準設計。PMC規范規定用戶定義的I/O通過一個或多個64針連接器退出PMC。這用戶I/O通常用于將I/O帶到系統后部，以增加或替換I/O可在PMC的前端擋板上使用。使用PMC模塊在系統集成級別添加功能的好處（與設計在主板上）是眾所周知的。PIM標準的發展現在允許統一的標準方法將此I/O路由到系統面板。
In addition, the PMC422 and PMC422/FP have a 16-bit general purpose Timer/Counter with 8 general-purpose bs. The 8 bits can be set with switches on-board and read by the host. A total of 256 combinations are possible.?PIM (PMC I/O Module) per VITA standard VITA 36-199X
The PIM422 is designed to give rear access I/O when used in conjunction with RAMiX's PMC421, PMC422 orPMC423. The PIM module mates to rear transition modules (refer to the assembly diagram in section 5), which have been designed to the PIM standard.
The PMC specification provides for user defined I/O to exit the PMC through one or more 64 pin connectors. This user I/O is commonly employed to bring I/O to the rear of the system in order to augment or replace the I/O available on the PMC’s bezel at the front.
The benefits of using a PMC module to add functionality at the system integration level (as opposed to being designed onto the host board) are well known. The development of the PIM standard now allows for a unib b to route this I/O to the system panel
