| 詳細參數 | |||
|---|---|---|---|
| 品牌 | Rockwell | 型號 | T8403 |
| 結構形式 | 模塊式 | 安裝方式 | 控制室安裝 |
| LD指令處理器 | 硬PLC | 功能 | 24Vdc數字輸入模塊 |
| 工作電壓 | 電源組24VDC | 輸出頻率 | 10/100Mbps |
| 處理速度 | 133MHz | 產品認證 | CE |
| 加工定制 | 否 | 產地 | 美國 |
Trusted?TMR 24 Vdc數字輸入模塊與40現場輸入接口設備。容錯通過三模塊冗余電路實現（TMR）模塊內40個輸入通道中每個通道的架構。每個磁場輸入是三倍的，輸入電壓是使用sigma-delta輸入電路。由此產生的場電壓測量結果如下所示與用戶可配置的閾值電壓進行比較，以確定報告的字段輸入狀態。在現場開關處安裝線路監測裝置時，該模塊可檢測現場電纜的開路和短路。在線監測為每個輸入通道獨立配置功能。這個三重電壓測量，結合車載診斷測試，提供全面的故障檢測和容錯功能。該模塊提供車載事件序列（SOE）報告和1毫秒的分辨率。狀態變化觸發SOE條目。國家是由每個通道上可配置的電壓閾值確定原因
特征
?每個模塊40個三模塊冗余（TMR）輸入通道。
?全面、自動診斷和自檢。
?每個通道的可選線路監測，以檢測斷路和短路電路現場接線故障。
?2500 V耐脈沖光/電流隔離屏障。
?車載事件序列（SOE）報告，分辨率為1ms。
?可使用專用配套工具在線熱更換模塊（相鄰）插槽或SmartSlot（多個模塊的一個備用插槽）配置。
?每個通道的前面板輸入狀態LED指示輸入狀態和現場接線故障。
?前面板模塊狀態LED指示模塊運行狀況和操作模式（主動、備用、受教育）。
?T?V認證的IEC 61508 SIL 3。
The Trusted? TMR 24 Vdc Digital Input module interfaces to 40 field b devices. Fault tolerance is achieved through a Triple Modular Redundant
(TMR) architecture within the module for each of the 40 b channels.Each field b is triplicated and the b voltage is measured using a sigma-delta b circuit. The resulting field voltage measurement is compared to user configurable threshold voltages to determine the reported field b state. When a line-monitoring device is installed at the field switch, the module can detect open and short circuit field cables. Line monitoring functions are independently configured for each b channel. The triplicated voltage measurement, coupled with onboard diagnostic testing, provides comprehensive fault detection and tolerance.
The module provides onboard Sequence of Events (SOE) reporting with a resolution of 1 ms. A change of state triggers an SOE entry. States are determined by voltage thresholds that can be configured on a per channel basis.
Features
? 40 Triple Modular Redundant (TMR) b channels per module.
? Comprehensive, automatic diagnostics and self-test.
? Selectable line monitoring per channel to detect open circuit and short circuit field wiring faults.
? 2500 V impulse withstand opto/galvanic isolation barrier.
? Onboard Sequence of Events (SOE) reporting with 1 ms resolution.
? Module can be hot-replaced online using dedicated Companion (adjacent) Slot or SmartSlot (one spare slot for many modules) configurations.
? Front panel b status LEDs for each channel indicate b status and field wiring faults.
? Front panel module status LEDs indicate module health and operational mode (Active, Standby, Educated).
? T?V Certified IEC 61508 SIL 3.
