| 詳細參數 | |||
|---|---|---|---|
| 品牌 | NI | 型號 | NI-9505 |
| 結構形式 | 模塊式 | 安裝方式 | 控制室安裝 |
| LD指令處理器 | 硬PLC | 功能 | 伺服驅動模塊 |
| 工作電壓 | 電源組24VDC | 產品認證 | CE |
| 環境溫度 | -40°C-70°C | 環境濕度 | -40°C至,85°C |
| 加工定制 | 否 | ||
NI NI-9505 直流有刷伺服驅動模塊
NI 9505具有獨特的靈活性和定制功能。這個NI9505與LabVIEW FPGA模塊一起工作，以創建高度可定制的電機驅動器或執行器放大器。
說明了NI 9505在中工作的功能以典型動作與LabVIEW FPGA模塊結合控件應用程序。典型的應用程序包含位置回路、速度回路和電流回路，在中實現LabVIEW FPGA模塊框圖。取決于在應用程序中，您可能不需要使用所有三個循環。
NI 9505將電機或執行器電流數據返回至LabVIEW FPGA模塊，用于電流回路或監測。NI 9505還返回狀態信息，如將故障狀態、VSUP存在和緊急停止?fàn)顟B(tài)驅動至用于系統監控的LabVIEW FPGA模塊。
The NI 9505 is suitable for use in Class I, Division 2, Groups A, B,C, D, T4 hazardous bs; Class I, Zone 2, AEx nA IIC T4 andEx nA IIC T4 hazardous bs; and nonhazardous bs only. Follow these guidelines if you are installing the NI 9505 in a potentially explosive environment. Not following these guidelines may result in serious injury or death
This equipment has been buated as Ex nA IIC T4 Gc equipment under DEMKO Certificate No. 07 ATEX 0626664X and is IECEx UL 14.0089X certified. Each module is marked II 3G and is suitable for use in Zone 2 hazardous bs, in ambient temperatures of -40 °C ? Ta ? 70 °C. If you are using the NI 9505
in Gas Group IIC hazardous bs, you must use the device in an NI chassis that has been buated as Ex nC IIC T4, Ex IIC T4,Ex nA IIC T4, or Ex nL IIC T4 equipment
This product was tested and complies with the regulatory requirements and limits for electromagnetic compatibility (EMC) as stated in the product specifications. These requirements and limits are designed to provide reasonable protection against harmful interference when the product is operated in its intended operational electromagnetic environment.This product is intended for use in industrial bs. As such,there is no guarantee that harmful interference will not occur in a particular installation, when the product is connected to a test b, or if the product is used in residential areas. To minimize
6 | ni.com | NI 9505 Operating Instructions and Specifications the potential for the product to cause interference to radio and bevision reception or to experience unacceptable perbance degradation, install and use this product in strict accordance with the instructions in the product documentation.
Furthermore, any changes or modifications to the product not expressly approved by National Instruments could void your authority to operate it under your local regulatory rules.
