西門子S120傳感器SMC20模塊6SL3055-0AA00-5BA3
現貨 現貨現貨 實拍圖
西門子代理商現貨供應
原裝正品 質保一年
上海斌勤電氣技術有限公司
發布人：康奎 （銷售經理）發布
本公司簽約正式的銷售合同，并開具13%的增-值-稅-發-票。
外地客戶統一采用快遞發貨,也支持上門提貨，貨物快遞到您手時候,一定要開箱檢驗!如有損壞,請拒絕簽收,并由快遞公司返回!
在你簽收后表示你對該貨物沒有異議!我們會給予您檢測時間,并請?jiān)谪浳锏浇o予確認,謝謝合作!
產品均為密封包裝，外包裝詳見產品圖片，白色標簽上均有產品訂貨號和產地，各位買家在收到貨后，請核對型號，無誤后再拆包裝、
本公司宗旨：本著以誠信為本，以顧客為中心.質量保證·服務誠信·價格實惠.
為用戶提供專業的自動化產品及服務！
相關西門子產品技術：
SMC20 Sensor Module Cabinet-Mounted
The SMC20 Sensor Module Cabinet-Mounted is required to evaluate the encoder signals of motors without a DRIVE?CLiQ interface. External encoders can also be connected via the SMC20.
The following encoder signals can be evaluated:
Incremental encoder sin/cos 1 Vpp
Absolute encoder EnDat 2.1
SSI encoder with incremental signals sin/cos 1 Vpp (firmware version 2.4 and later)
The motor temperature can also be sensed using a PTC thermistor KTY84?130, Pt1000 1) or PTC.
1) The Pt1000 sensor is not supported when combined with a Control Unit CU305.
設計
The SMC20 Sensor Module Cabinet-Mounted features the following connections and interfaces as standard:
1 encoder connection including motor temperature sensing (KTY84?130, Pt1000 1) or PTC) via SUB?D connector
1 DRIVE-CLiQ interface
1 connection for the electronics power supply via the 24 V DC supply connector
1 PE/protective conductor connection
The status of the SMC20 Sensor Module Cabinet-Mounted is indicated via a multi-color LED.
The SMC20 Sensor Module Cabinet-Mounted can be snapped onto a TH 35 standard mounting rail according to EN 60715 (IEC 60715).
The signal cable shield is connected via the encoder system connector and can also be connected to the SMC20 Sensor Module Cabinet-Mounted via a shield connection terminal, e.g. Phoenix Contact type SK8 or Weidmüller type KLBü CO 1. The shield connection terminal must not be used as a strain relief mechanism.
1) The Pt1000 sensor is not supported when combined with a Control Unit CU305.
