此價格并非售價，有需求請聯系13724211742郭生DLHR-F50G-E1BD-C-NAV8
The DLHR Series Mini Digital Output Pressure Sensor is based on All Sensors&＃39; CoBeam2 TM
Technology. This reduces package stress susceptibility, resulting in
improved overall long term stability and vastly improves the position
sensitivity.
The digital interface option eases integration of the sensors into a
wide range of process control and measurement systems, allowing direct
connection to serial communications channels. For battery-powered
systems, the sensors can entire very low-power modes between readings to
minimize load on the power supply.
These calibrated and compensated sensors provide accurate, stable
output over a wide temperature range. This seris is intended for use
with non-corrosive, non-iconic working fluids such as air, dry gases,
and the like. A protective paralyne coating is optionally available for
moisture/harsh media protection.
DLHR系列微型數字輸出壓力傳感器基于All Sensors的CoBeam2 TM技術。 這降低了封裝應力敏感性，從而改善了總體長期穩定性，并大大提高了位置靈敏度。
數字接口選項簡化了將傳感器集成到各種過程控制和測量系統中的過程，從而可以直接連接到串行通信通道。 對于電池供電的系統，傳感器可以在兩次讀數之間建立非常低功耗的模式，以程度地減少電源上的負載。
這些經過校準和補償的傳感器可在寬溫度范圍內提供準確，穩定的輸出。 該系列旨在與非腐蝕性，非圖標性工作流體（例如空氣，干燥氣體等）一起使用。 可以選擇使用保護性的聚對二甲苯涂層來保護水分/苛刻的介質。
DLHR-L02D-E1BD-C-NAV8
DLHR-L02G-E1BD-C-NAV8
DLHR-L60G-E1BD-C-NAV8
DLHR-L05D-E1BD-C-NAV8
DLHR-L60D-E1BD-C-NAV8
DLHR-L30D-E1BD-C-NAV8
DLHR-L10D-E1BD-C-NAV8
DLHR-L10G-E1BD-C-NAV8
DLHR-L01G-E1BD-C-NAV8
DLHR-L30G-E1BD-C-NAV8
DLHR-L05G-E1BD-C-NAV8
DLHR-F50D-E1BD-C-NAV8
DLHR-L01D-E1BD-C-NAV8
DLHR-F50G-E1BD-C-NAV8
DLHR-L05D-E1BD-I-NAV8
DLHR-L01D-E1BD-I-NAV8
DLHR-L10D-E1BD-I-NAV8
DLHR-F50D-E1BD-I-NAV8
DLHR-L60D-E1BD-I-NAV8
DLHR-L02D-E1BD-I-NAV8
DLHR-L30D-E1BD-I-NAV8